[fli4l] Release der stabilen fli4l Version 3.10.5
Nicky Cybala
allinge at t-online.de
Mo Feb 22 17:14:06 CET 2016
Hallo Christoph,
Am 22.02.2016 um 14:43 schrieb Christoph Schulz:
> Hallo!
>> Sat Jan 1 01:01:17 2000: Cannot find device "wlan1"
>
> Hier müsste es laut Dokumentation aber "wlan0v2" und nicht "wlan1" heißen...
Jepp, das war noch von der Uebernahme der Konfig aus 3.6.2. Jetzt
richtig wlan0v2.
> Ich tippe auf ein Timing- und/oder Firmware-Problem in Kombination mit der
> verwendeten Hardware und dem verwendeten Kernel, insbesondere da es nach
> einem erneuten Booten funktioniert. Um diesen Verdacht zu erhärten, müsstest
> du uns aber schon dein Kernel-Protokoll zukommen lassen, denn mit den
> bisherigen Teilen allein kommen wir da nicht weiter. In fli4l 3.6.2 wird
> Kernel 2.6.32.x verwendet, in fli4l 3.10.x Kernel 3.14.x -- das ist schon
> ein Unterschied.
Hier mal die Protokolle 1x Kaltstart und 1x Warmstart. Die
unwesentlichen Abschnitte nach hinten raus lasse ich mal weg. Ich hoffe
das ist nicht zuviel.
geloggt wurde mit
SYSLOG_DEST_1_='*.* /...'
OPT_KLOGD='yes'
--- Kaltstart ---
Jan 1 01:01:17 fli4l syslog.info syslogd started: BusyBox v1.22.1
Jan 1 01:01:19 fli4l kern.notice kernel: klogd started: BusyBox v1.22.1
(fli4l)
Jan 1 01:01:19 fli4l kern.notice kernel: Linux version 3.14.60
(fli4l at eisler) (gcc version 4.9.2 (Buildroot 2014.11) ) #1 SMP Thu Feb 4
09:55:14 CET 2016
Jan 1 01:01:19 fli4l kern.info kernel: KERNEL supported cpus:
Jan 1 01:01:19 fli4l kern.info kernel: Intel GenuineIntel
Jan 1 01:01:19 fli4l kern.info kernel: AMD AuthenticAMD
Jan 1 01:01:19 fli4l kern.info kernel: NSC Geode by NSC
Jan 1 01:01:19 fli4l kern.info kernel: Cyrix CyrixInstead
Jan 1 01:01:19 fli4l kern.info kernel: Centaur CentaurHauls
Jan 1 01:01:19 fli4l kern.info kernel: Transmeta GenuineTMx86
Jan 1 01:01:19 fli4l kern.info kernel: Transmeta TransmetaCPU
Jan 1 01:01:19 fli4l kern.info kernel: UMC UMC UMC UMC
Jan 1 01:01:19 fli4l kern.info kernel: e820: BIOS-provided physical RAM
map:
Jan 1 01:01:19 fli4l kern.info kernel: BIOS-e820: [mem
0x0000000000000000-0x000000000009ffff] usable
Jan 1 01:01:19 fli4l kern.info kernel: BIOS-e820: [mem
0x00000000000f0000-0x00000000000fffff] reserved
Jan 1 01:01:19 fli4l kern.info kernel: BIOS-e820: [mem
0x0000000000100000-0x0000000007ffffff] usable
Jan 1 01:01:19 fli4l kern.info kernel: BIOS-e820: [mem
0x00000000fff00000-0x00000000ffffffff] reserved
Jan 1 01:01:19 fli4l kern.notice kernel: Notice: NX (Execute Disable)
protection missing in CPU!
Jan 1 01:01:19 fli4l kern.info kernel: DMI not present or invalid.
Jan 1 01:01:19 fli4l kern.debug kernel: e820: update [mem
0x00000000-0x00000fff] usable ==> reserved
Jan 1 01:01:19 fli4l kern.debug kernel: e820: remove [mem
0x000a0000-0x000fffff] usable
Jan 1 01:01:19 fli4l kern.info kernel: e820: last_pfn = 0x8000
max_arch_pfn = 0x100000
Jan 1 01:01:19 fli4l kern.debug kernel: initial memory mapped: [mem
0x00000000-0x017fffff]
Jan 1 01:01:19 fli4l kern.debug kernel: Base memory trampoline at
[c009b000] 9b000 size 16384
Jan 1 01:01:19 fli4l kern.info kernel: init_memory_mapping: [mem
0x00000000-0x000fffff]
Jan 1 01:01:19 fli4l kern.debug kernel: [mem 0x00000000-0x000fffff]
page 4k
Jan 1 01:01:19 fli4l kern.info kernel: init_memory_mapping: [mem
0x07800000-0x07bfffff]
Jan 1 01:01:19 fli4l kern.debug kernel: [mem 0x07800000-0x07bfffff]
page 4k
Jan 1 01:01:19 fli4l kern.debug kernel: BRK [0x014a2000, 0x014a2fff]
PGTABLE
Jan 1 01:01:19 fli4l kern.info kernel: init_memory_mapping: [mem
0x00100000-0x077fffff]
Jan 1 01:01:19 fli4l kern.debug kernel: [mem 0x00100000-0x077fffff]
page 4k
Jan 1 01:01:19 fli4l kern.info kernel: init_memory_mapping: [mem
0x07c00000-0x07ffffff]
Jan 1 01:01:19 fli4l kern.debug kernel: [mem 0x07c00000-0x07ffffff]
page 4k
Jan 1 01:01:19 fli4l kern.debug kernel: BRK [0x014a3000, 0x014a3fff]
PGTABLE
Jan 1 01:01:19 fli4l kern.info kernel: RAMDISK: [mem 0x07e44000-0x07ffefff]
Jan 1 01:01:19 fli4l kern.notice kernel: 0MB HIGHMEM available.
Jan 1 01:01:19 fli4l kern.notice kernel: 128MB LOWMEM available.
Jan 1 01:01:19 fli4l kern.info kernel: mapped low ram: 0 - 08000000
Jan 1 01:01:19 fli4l kern.info kernel: low ram: 0 - 08000000
Jan 1 01:01:19 fli4l kern.debug kernel: BRK [0x014a4000, 0x014a4fff]
PGTABLE
Jan 1 01:01:19 fli4l kern.warn kernel: Zone ranges:
Jan 1 01:01:19 fli4l kern.warn kernel: DMA [mem
0x00001000-0x00ffffff]
Jan 1 01:01:19 fli4l kern.warn kernel: Normal [mem
0x01000000-0x07ffffff]
Jan 1 01:01:19 fli4l kern.warn kernel: HighMem empty
Jan 1 01:01:19 fli4l kern.warn kernel: Movable zone start for each node
Jan 1 01:01:19 fli4l kern.warn kernel: Early memory node ranges
Jan 1 01:01:19 fli4l kern.warn kernel: node 0: [mem
0x00001000-0x0009ffff]
Jan 1 01:01:19 fli4l kern.warn kernel: node 0: [mem
0x00100000-0x07ffffff]
Jan 1 01:01:19 fli4l kern.debug kernel: On node 0 totalpages: 32671
Jan 1 01:01:19 fli4l kern.debug kernel: free_area_init_node: node 0,
pgdat c13c0820, node_mem_map c7d44020
Jan 1 01:01:19 fli4l kern.debug kernel: DMA zone: 32 pages used for
memmap
Jan 1 01:01:19 fli4l kern.debug kernel: DMA zone: 0 pages reserved
Jan 1 01:01:19 fli4l kern.debug kernel: DMA zone: 3999 pages, LIFO
batch:0
Jan 1 01:01:19 fli4l kern.debug kernel: Normal zone: 224 pages used
for memmap
Jan 1 01:01:19 fli4l kern.debug kernel: Normal zone: 28672 pages,
LIFO batch:7
Jan 1 01:01:19 fli4l kern.info kernel: Using APIC driver default
Jan 1 01:01:19 fli4l kern.info kernel: SFI: Simple Firmware Interface
v0.81 http://simplefirmware.org
Jan 1 01:01:19 fli4l kern.info kernel: smpboot: Allowing 1 CPUs, 0
hotplug CPUs
Jan 1 01:01:19 fli4l kern.info kernel: No local APIC present or
hardware disabled
Jan 1 01:01:19 fli4l kern.info kernel: APIC: disable apic facility
Jan 1 01:01:19 fli4l kern.info kernel: APIC: switched to apic NOOP
Jan 1 01:01:19 fli4l kern.debug kernel: nr_irqs_gsi: 16
Jan 1 01:01:19 fli4l kern.info kernel: e820: [mem
0x08000000-0xffefffff] available for PCI devices
Jan 1 01:01:19 fli4l kern.info kernel: setup_percpu: NR_CPUS:4
nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
Jan 1 01:01:19 fli4l kern.info kernel: PERCPU: Embedded 12 pages/cpu
@c7d36000 s25952 r0 d23200 u49152
Jan 1 01:01:19 fli4l kern.debug kernel: pcpu-alloc: s25952 r0 d23200
u49152 alloc=12*4096
Jan 1 01:01:19 fli4l kern.debug kernel: pcpu-alloc: [0] 0
Jan 1 01:01:19 fli4l kern.warn kernel: Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 32415
Jan 1 01:01:19 fli4l kern.notice kernel: Kernel command line:
load_ramdisk=1 initrd=rootfs.img fli4l_mode=normal console=ttyS0,38400n8
nokbd reboot=bios printk.time=0 ipv6.disable=1 acpi=off BOOT_IMAGE=kernel
Jan 1 01:01:19 fli4l kern.info kernel: PID hash table entries: 512
(order: -1, 2048 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: Dentry cache hash table entries:
16384 (order: 4, 65536 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: Inode-cache hash table entries:
8192 (order: 3, 32768 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: Initializing CPU#0
Jan 1 01:01:19 fli4l kern.info kernel: Initializing HighMem for node 0
(00000000:00000000)
Jan 1 01:01:19 fli4l kern.warn kernel: Memory: 122792K/130684K
available (2723K kernel code, 208K rwdata, 940K rodata, 396K init, 432K
bss, 7892K reserved, 0K highmem)
Jan 1 01:01:19 fli4l kern.info kernel: virtual kernel memory layout:
Jan 1 01:01:19 fli4l kern.info kernel: fixmap : 0xfff66000 -
0xfffff000 ( 612 kB)
Jan 1 01:01:19 fli4l kern.info kernel: pkmap : 0xff800000 -
0xffc00000 (4096 kB)
Jan 1 01:01:19 fli4l kern.info kernel: vmalloc : 0xc8800000 -
0xff7fe000 ( 879 MB)
Jan 1 01:01:19 fli4l kern.info kernel: lowmem : 0xc0000000 -
0xc8000000 ( 128 MB)
Jan 1 01:01:19 fli4l kern.info kernel: .init : 0xc13cb000 -
0xc142e000 ( 396 kB)
Jan 1 01:01:19 fli4l kern.info kernel: .data : 0xc12a9106 -
0xc13ca340 (1156 kB)
Jan 1 01:01:19 fli4l kern.info kernel: .text : 0xc1000000 -
0xc12a9106 (2724 kB)
Jan 1 01:01:19 fli4l kern.info kernel: Checking if this processor
honours the WP bit even in supervisor mode...Ok.
Jan 1 01:01:19 fli4l kern.info kernel: SLUB: HWalign=32, Order=0-3,
MinObjects=0, CPUs=1, Nodes=1
Jan 1 01:01:19 fli4l kern.info kernel: Hierarchical RCU implementation.
Jan 1 01:01:19 fli4l kern.info kernel: RCU dyntick-idle grace-period
acceleration is enabled.
Jan 1 01:01:19 fli4l kern.info kernel: RCU restricting CPUs from
NR_CPUS=4 to nr_cpu_ids=1.
Jan 1 01:01:19 fli4l kern.info kernel: RCU: Adjusting geometry for
rcu_fanout_leaf=16, nr_cpu_ids=1
Jan 1 01:01:19 fli4l kern.info kernel: NR_IRQS:2304 nr_irqs:256 16
Jan 1 01:01:19 fli4l kern.debug kernel: CPU 0 irqstacks, hard=c7406000
soft=c7408000
Jan 1 01:01:19 fli4l kern.info kernel: Console: colour dummy device 80x25
Jan 1 01:01:19 fli4l kern.info kernel: console [ttyS0] enabled
Jan 1 01:01:19 fli4l kern.info kernel: tsc: Fast TSC calibration using PIT
Jan 1 01:01:19 fli4l kern.info kernel: tsc: Detected 266.635 MHz processor
Jan 1 01:01:19 fli4l kern.info kernel: Calibrating delay loop
(skipped), value calculated using timer frequency.. 533.27 BogoMIPS
(lpj=2666350)
Jan 1 01:01:19 fli4l kern.info kernel: pid_max: default: 32768 minimum: 301
Jan 1 01:01:19 fli4l kern.info kernel: Mount-cache hash table entries:
1024 (order: 0, 4096 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: Mountpoint-cache hash table
entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: Last level iTLB entries: 4KB 0,
2MB 0, 4MB 0
Jan 1 01:01:19 fli4l kern.info kernel: Last level dTLB entries: 4KB 0,
2MB 0, 4MB 0, 1GB 0
Jan 1 01:01:19 fli4l kern.info kernel: tlb_flushall_shift: -1
Jan 1 01:01:19 fli4l kern.info kernel: Freeing SMP alternatives memory:
8K (c142e000 - c1430000)
Jan 1 01:01:19 fli4l kern.warn kernel: smpboot: weird, boot CPU (#0)
not listed by the BIOS
Jan 1 01:01:19 fli4l kern.notice kernel: smpboot: SMP motherboard not
detected
Jan 1 01:01:19 fli4l kern.notice kernel: smpboot: Local APIC not
detected. Using dummy APIC emulation.
Jan 1 01:01:19 fli4l kern.info kernel: smpboot: SMP disabled
Jan 1 01:01:19 fli4l kern.info kernel: Performance Events: no PMU
driver, software events only.
Jan 1 01:01:19 fli4l kern.info kernel: x86: Booted up 1 node, 1 CPUs
Jan 1 01:01:19 fli4l kern.info kernel: smpboot: Total of 1 processors
activated (533.27 BogoMIPS)
Jan 1 01:01:19 fli4l kern.info kernel: NET: Registered protocol family 16
Jan 1 01:01:19 fli4l kern.info kernel: cpuidle: using governor ladder
Jan 1 01:01:19 fli4l kern.info kernel: cpuidle: using governor menu
Jan 1 01:01:19 fli4l kern.info kernel: PCI: PCI BIOS revision 2.10
entry at 0xfc44b, last bus=0
Jan 1 01:01:19 fli4l kern.info kernel: PCI: Using configuration type 1
for base access
Jan 1 01:01:19 fli4l kern.info kernel: bio: create slab <bio-0> at 0
Jan 1 01:01:19 fli4l kern.info kernel: ACPI: Interpreter disabled.
Jan 1 01:01:19 fli4l kern.info kernel: vgaarb: loaded
Jan 1 01:01:19 fli4l kern.warn kernel: PCI: Probing PCI hardware
Jan 1 01:01:19 fli4l kern.debug kernel: PCI: root bus 00: using default
resources
Jan 1 01:01:19 fli4l kern.debug kernel: PCI: Probing PCI hardware (bus 00)
Jan 1 01:01:19 fli4l kern.info kernel: PCI host bridge to bus 0000:00
Jan 1 01:01:19 fli4l kern.info kernel: pci_bus 0000:00: root bus
resource [io 0x0000-0xffff]
Jan 1 01:01:19 fli4l kern.info kernel: pci_bus 0000:00: root bus
resource [mem 0x00000000-0xffffffff]
Jan 1 01:01:19 fli4l kern.info kernel: pci_bus 0000:00: No busn
resource found for root bus, will use [bus 00-ff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:00.0: [1078:0001]
type 00 class 0x060000
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0d.0: [168c:ff16]
type 00 class 0x020000
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0d.0: reg 0x10:
[mem 0x80000000-0x8000ffff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0d.1: [168c:ff96]
type 00 class 0x070002
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0d.1: reg 0x10: [io
0x1000-0x1007]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0d.1: reg 0x14:
[mem 0x80040000-0x80040fff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0e.0: [100b:0020]
type 00 class 0x020000
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0e.0: reg 0x10: [io
0x1400-0x14ff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0e.0: reg 0x14:
[mem 0x80080000-0x80080fff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0e.0: reg 0x30:
[mem 0x00000000-0x0000ffff pref]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0e.0: supports D1 D2
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0e.0: PME#
supported from D0 D1 D2 D3hot
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0f.0: [100b:0020]
type 00 class 0x020000
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0f.0: reg 0x10: [io
0x1800-0x18ff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0f.0: reg 0x14:
[mem 0x800c0000-0x800c0fff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0f.0: reg 0x30:
[mem 0x00000000-0x0000ffff pref]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0f.0: supports D1 D2
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:0f.0: PME#
supported from D0 D1 D2 D3hot
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:10.0: [100b:0020]
type 00 class 0x020000
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:10.0: reg 0x10: [io
0x1c00-0x1cff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:10.0: reg 0x14:
[mem 0x80100000-0x80100fff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:10.0: reg 0x30:
[mem 0x00000000-0x0000ffff pref]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:10.0: supports D1 D2
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:10.0: PME#
supported from D0 D1 D2 D3hot
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.0: [100b:0510]
type 00 class 0x060100
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.0: reg 0x10: [io
0xf400-0xf43f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.0: reg 0x14: [io
0xf600-0xf63f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.1: [100b:0511]
type 00 class 0x068000
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.1: reg 0x10: [io
0xf000-0xf0ff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.2: [100b:0502]
type 00 class 0x010180
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.2: reg 0x20: [io
0xfc00-0xfc0f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.3: [100b:0503]
type 00 class 0x040100
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.3: reg 0x10:
[mem 0x40011000-0x40011fff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.5: [100b:0515]
type 00 class 0x068000
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x10: [io
0xf200-0xf23f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x14:
[mem 0x00000000-0x0000003f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x18:
[mem 0x00000000-0x0000003f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x1c:
[mem 0x00000000-0x0000003f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x20:
[mem 0x00000000-0x0000003f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x24:
[mem 0x00000000-0x0000003f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:13.0: [0e11:a0f8]
type 00 class 0x0c0310
Jan 1 01:01:19 fli4l kern.debug kernel: pci 0000:00:13.0: reg 0x10:
[mem 0xf0000000-0xf0000fff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci_bus 0000:00: busn_res: [bus
00-ff] end is updated to 00
Jan 1 01:01:19 fli4l kern.debug kernel: PCI: pci_cache_line_size set to
32 bytes
Jan 1 01:01:19 fli4l kern.info kernel: Switched to clocksource pit
Jan 1 01:01:19 fli4l kern.info kernel: pnp: PnP ACPI: disabled
Jan 1 01:01:19 fli4l kern.info kernel: PnPBIOS: Scanning system for PnP
BIOS support...
Jan 1 01:01:19 fli4l kern.info kernel: PnPBIOS: PnP BIOS support was
not detected.
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:0e.0: BAR 6:
assigned [mem 0x08000000-0x0800ffff pref]
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:0f.0: BAR 6:
assigned [mem 0x08010000-0x0801ffff pref]
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:10.0: BAR 6:
assigned [mem 0x08020000-0x0802ffff pref]
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:12.5: BAR 1:
assigned [mem 0x08030000-0x0803003f]
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:12.5: BAR 2:
assigned [mem 0x08030040-0x0803007f]
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:12.5: BAR 3:
assigned [mem 0x08030080-0x080300bf]
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:12.5: BAR 4:
assigned [mem 0x080300c0-0x080300ff]
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:12.5: BAR 5:
assigned [mem 0x08030100-0x0803013f]
Jan 1 01:01:19 fli4l kern.debug kernel: pci_bus 0000:00: resource 4 [io
0x0000-0xffff]
Jan 1 01:01:19 fli4l kern.debug kernel: pci_bus 0000:00: resource 5
[mem 0x00000000-0xffffffff]
Jan 1 01:01:19 fli4l kern.info kernel: NET: Registered protocol family 2
Jan 1 01:01:19 fli4l kern.info kernel: TCP established hash table
entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: TCP bind hash table entries:
1024 (order: 1, 8192 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: TCP: Hash tables configured
(established 1024 bind 1024)
Jan 1 01:01:19 fli4l kern.info kernel: TCP: reno registered
Jan 1 01:01:19 fli4l kern.info kernel: UDP hash table entries: 256
(order: 1, 8192 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: UDP-Lite hash table entries: 256
(order: 1, 8192 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: NET: Registered protocol family 1
Jan 1 01:01:19 fli4l kern.info kernel: pci 0000:00:13.0: enabling
device (0000 -> 0002)
Jan 1 01:01:19 fli4l kern.debug kernel: PCI: CLS 32 bytes, default 32
Jan 1 01:01:19 fli4l kern.info kernel: Trying to unpack rootfs image as
initramfs...
Jan 1 01:01:19 fli4l kern.info kernel: Freeing initrd memory: 1772K
(c7e44000 - c7fff000)
Jan 1 01:01:19 fli4l kern.info kernel: platform rtc_cmos: registered
platform RTC device (no PNP device found)
Jan 1 01:01:19 fli4l kern.info kernel: futex hash table entries: 256
(order: 1, 8192 bytes)
Jan 1 01:01:19 fli4l kern.info kernel: msgmni has been set to 243
Jan 1 01:01:19 fli4l kern.info kernel: Block layer SCSI generic (bsg)
driver version 0.4 loaded (major 252)
Jan 1 01:01:19 fli4l kern.info kernel: io scheduler noop registered
Jan 1 01:01:19 fli4l kern.info kernel: io scheduler cfq registered
(default)
Jan 1 01:01:19 fli4l kern.info kernel: isapnp: Scanning for PnP cards...
Jan 1 01:01:19 fli4l kern.info kernel: isapnp: No Plug & Play device found
Jan 1 01:01:19 fli4l kern.info kernel: Serial: 8250/16550 driver, 4
ports, IRQ sharing enabled
Jan 1 01:01:19 fli4l kern.info kernel: serial8250: ttyS0 at I/O 0x3f8
(irq = 4, base_baud = 921600) is a NS16550A
Jan 1 01:01:19 fli4l kern.info kernel: brd: module loaded
Jan 1 01:01:19 fli4l kern.info kernel: loop: module loaded
Jan 1 01:01:19 fli4l kern.info kernel: i8042: PNP: No PS/2 controller
found. Probing ports directly.
Jan 1 01:01:19 fli4l kern.err kernel: i8042: No controller found
Jan 1 01:01:19 fli4l kern.info kernel: rtc_cmos rtc_cmos: rtc core:
registered rtc_cmos as rtc0
Jan 1 01:01:19 fli4l kern.info kernel: rtc_cmos rtc_cmos: alarms up to
one day, 114 bytes nvram
Jan 1 01:01:19 fli4l kern.info kernel: Netfilter messages via NETLINK
v0.30.
Jan 1 01:01:19 fli4l kern.info kernel: nfnl_acct: registering with
nfnetlink.
Jan 1 01:01:19 fli4l kern.info kernel: nf_conntrack version 0.5.0 (1946
buckets, 7784 max)
Jan 1 01:01:19 fli4l kern.info kernel: ctnetlink v0.93: registering
with nfnetlink.
Jan 1 01:01:19 fli4l kern.info kernel: nf_tables: (c) 2007-2009 Patrick
McHardy <kaber at trash.net>
Jan 1 01:01:19 fli4l kern.info kernel: xt_time: kernel timezone is -0000
Jan 1 01:01:19 fli4l kern.notice kernel: ip_set: protocol 6
Jan 1 01:01:19 fli4l kern.info kernel: ip_tables: (C) 2000-2006
Netfilter Core Team
Jan 1 01:01:19 fli4l kern.info kernel: ipt_CLUSTERIP: ClusterIP Version
0.8 loaded successfully
Jan 1 01:01:19 fli4l kern.info kernel: arp_tables: (C) 2002 David S. Miller
Jan 1 01:01:19 fli4l kern.info kernel: TCP: cubic registered
Jan 1 01:01:19 fli4l kern.info kernel: IPv6: Loaded, but
administratively disabled, reboot required to enable
Jan 1 01:01:19 fli4l kern.info kernel: ip6_tables: (C) 2000-2006
Netfilter Core Team
Jan 1 01:01:19 fli4l kern.info kernel: NET: Registered protocol family 17
Jan 1 01:01:19 fli4l kern.info kernel: Using IPI No-Shortcut mode
Jan 1 01:01:19 fli4l kern.info kernel: Switched to clocksource tsc
Jan 1 01:01:19 fli4l kern.info kernel: console [netcon0] enabled
Jan 1 01:01:19 fli4l kern.info kernel: netconsole: network logging started
Jan 1 01:01:19 fli4l kern.info kernel: Freeing unused kernel memory:
396K (c13cb000 - c142e000)
Jan 1 01:01:19 fli4l kern.info kernel: Write protecting the kernel
text: 2728k
Jan 1 01:01:19 fli4l kern.info kernel: Write protecting the kernel
read-only data: 944k
Jan 1 01:01:19 fli4l kern.warn kernel: Clocksource tsc unstable (delta
= -446753130 ns)
Jan 1 01:01:19 fli4l kern.info kernel: Switched to clocksource pit
Jan 1 01:01:19 fli4l kern.notice kernel: random: sed urandom read with
19 bits of entropy available
Jan 1 01:01:19 fli4l kern.notice kernel: SCSI subsystem initialized
Jan 1 01:01:19 fli4l kern.debug kernel: libata version 3.00 loaded.
Jan 1 01:01:19 fli4l kern.info kernel: scsi0 : ata_generic
Jan 1 01:01:19 fli4l kern.info kernel: scsi1 : ata_generic
Jan 1 01:01:19 fli4l kern.info kernel: ata1: PATA max UDMA/100 cmd
0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Jan 1 01:01:19 fli4l kern.info kernel: ata2: PATA max UDMA/100 cmd
0x170 ctl 0x376 bmdma 0xfc08 irq 15
Jan 1 01:01:19 fli4l kern.info kernel: ata1.00: CFA: SanDisk SDCFB-32,
Vdg 1.23, max PIO4
Jan 1 01:01:19 fli4l kern.info kernel: ata1.00: 62720 sectors, multi 0:
LBA
Jan 1 01:01:19 fli4l kern.info kernel: ata1.00: configured for PIO
Jan 1 01:01:19 fli4l kern.notice kernel: scsi 0:0:0:0: Direct-Access
ATA SanDisk SDCFB-32 Vdg PQ: 0 ANSI: 5
Jan 1 01:01:19 fli4l kern.notice kernel: sd 0:0:0:0: [sda] 62720
512-byte logical blocks: (32.1 MB/30.6 MiB)
Jan 1 01:01:19 fli4l kern.notice kernel: sd 0:0:0:0: [sda] Write
Protect is off
Jan 1 01:01:19 fli4l kern.debug kernel: sd 0:0:0:0: [sda] Mode Sense:
00 3a 00 00
Jan 1 01:01:19 fli4l kern.notice kernel: sd 0:0:0:0: [sda] Write cache:
disabled, read cache: enabled, doesn't support DPO or FUA
Jan 1 01:01:19 fli4l kern.info kernel: sda: sda1
Jan 1 01:01:19 fli4l kern.notice kernel: sd 0:0:0:0: [sda] Attached
SCSI removable disk
Jan 1 01:01:19 fli4l kern.notice kernel: random: nonblocking pool is
initialized
Jan 1 01:01:19 fli4l kern.info kernel: NatSemi SCx200 Driver
Jan 1 01:01:19 fli4l kern.info kernel: GPIO base 0xf400
Jan 1 01:01:19 fli4l kern.info kernel: Configuration Block base 0x9000
Jan 1 01:01:19 fli4l kern.info kernel: scx200_wdt: timer margin 60 seconds
Jan 1 01:01:19 fli4l user.warn kernel: 415 mdev usb helper started as
'/lib/mdev/usb' in '/dev', MDEV '0-0048', ACTION 'add', DEVPATH
'/devices/i2c-0/0-0048', SUBSYSTEM 'i2c'
Jan 1 01:01:19 fli4l kern.info kernel: load SCX200 GPIO driver module
Jan 1 01:01:19 fli4l kern.info kernel: SCX200 GPIO driver module loaded
Jan 1 01:01:19 fli4l kern.info kernel: scx200_wdt: timer margin 20 seconds
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: Calling CRDA to update
world regulatory domain
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: World regulatory
domain updated:
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: DFS Master region: unset
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (2402000 KHz -
2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (2457000 KHz -
2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (2474000 KHz -
2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (5170000 KHz -
5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (5250000 KHz -
5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (5490000 KHz -
5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (5735000 KHz -
5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (57240000 KHz -
63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: natsemi dp8381x driver, version
2.1, Sept 11, 2006
Jan 1 01:01:19 fli4l kern.info kernel: originally by Donald Becker
<becker at scyld.com>
Jan 1 01:01:19 fli4l kern.info kernel: 2.4.x kernel port by Jeff
Garzik, Tjeerd Mulder
Jan 1 01:01:19 fli4l kern.info kernel: natsemi eth0: NatSemi DP8381[56]
at 0x80080000 (0000:00:0e.0), 00:0d:b9:02:c8:44, IRQ 10, port TP.
Jan 1 01:01:19 fli4l kern.info kernel: natsemi eth1: NatSemi DP8381[56]
at 0x800c0000 (0000:00:0f.0), 00:0d:b9:02:c8:45, IRQ 9, port TP.
Jan 1 01:01:19 fli4l kern.info kernel: natsemi eth2: NatSemi DP8381[56]
at 0x80100000 (0000:00:10.0), 00:0d:b9:02:c8:46, IRQ 11, port TP.
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: Calling CRDA for
country: DE
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: Regulatory domain
changed to country: DE
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: DFS Master region: ETSI
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (2400000 KHz -
2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (5150000 KHz -
5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (5250000 KHz -
5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (5470000 KHz -
5725000 KHz @ 160000 KHz), (N/A, 2698 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: cfg80211: (57000000 KHz -
66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Jan 1 01:01:19 fli4l kern.info kernel: eth0: DSPCFG accepted after 0 usec.
Jan 1 01:01:19 fli4l kern.notice kernel: eth0: link up.
Jan 1 01:01:19 fli4l kern.info kernel: eth0: Setting full-duplex based
on negotiated link capability.
Jan 1 01:01:19 fli4l kern.info kernel: eth2: DSPCFG accepted after 0 usec.
Jan 1 01:01:21 fli4l kern.info kernel: eth1: DSPCFG accepted after 0 usec.
Jan 1 01:01:21 fli4l kern.notice kernel: eth1: link up.
Jan 1 01:01:21 fli4l kern.info kernel: eth1: Setting full-duplex based
on negotiated link capability.
Jan 1 01:01:21 fli4l kern.info kernel: PPP generic driver version 2.4.2
Jan 1 01:01:21 fli4l kern.info kernel: NET: Registered protocol family 24
Jan 1 01:01:27 fli4l local2.info pppd[1329]: Plugin rp-pppoe.so loaded.
Jan 1 01:01:27 fli4l local2.notice pppd[1329]: pppd 2.4.6 started by
root, uid 0
Jan 1 01:01:27 fli4l local2.info pppd[1329]: Using interface ppp0
Jan 1 01:01:27 fli4l local2.notice pppd[1329]: local IP address
10.112.112.112
Jan 1 01:01:27 fli4l local2.notice pppd[1329]: remote IP address
10.112.112.113
Jan 1 01:01:54 fli4l local0.info dnsmasq[3113]: started, version 2.73
cachesize 150
Jan 1 01:01:54 fli4l local0.info dnsmasq[3113]: compile time options:
IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack
ipset auth no-DNSSEC loop-detect inotify
ab hier kommt dann die Konfig...
--- Warmstart ---
Feb 22 15:29:15 fli4l syslog.info syslogd started: BusyBox v1.22.1
Feb 22 15:29:17 fli4l kern.notice kernel: klogd started: BusyBox v1.22.1
(fli4l)
Feb 22 15:29:17 fli4l kern.notice kernel: Linux version 3.14.60
(fli4l at eisler) (gcc version 4.9.2 (Buildroot 2014.11) ) #1 SMP Thu Feb 4
09:55:14 CET 2016
Feb 22 15:29:17 fli4l kern.info kernel: KERNEL supported cpus:
Feb 22 15:29:17 fli4l kern.info kernel: Intel GenuineIntel
Feb 22 15:29:17 fli4l kern.info kernel: AMD AuthenticAMD
Feb 22 15:29:17 fli4l kern.info kernel: NSC Geode by NSC
Feb 22 15:29:17 fli4l kern.info kernel: Cyrix CyrixInstead
Feb 22 15:29:17 fli4l kern.info kernel: Centaur CentaurHauls
Feb 22 15:29:17 fli4l kern.info kernel: Transmeta GenuineTMx86
Feb 22 15:29:17 fli4l kern.info kernel: Transmeta TransmetaCPU
Feb 22 15:29:17 fli4l kern.info kernel: UMC UMC UMC UMC
Feb 22 15:29:17 fli4l kern.info kernel: e820: BIOS-provided physical RAM
map:
Feb 22 15:29:17 fli4l kern.info kernel: BIOS-e820: [mem
0x0000000000000000-0x000000000009ffff] usable
Feb 22 15:29:17 fli4l kern.info kernel: BIOS-e820: [mem
0x00000000000f0000-0x00000000000fffff] reserved
Feb 22 15:29:17 fli4l kern.info kernel: BIOS-e820: [mem
0x0000000000100000-0x0000000007ffffff] usable
Feb 22 15:29:17 fli4l kern.info kernel: BIOS-e820: [mem
0x00000000fff00000-0x00000000ffffffff] reserved
Feb 22 15:29:17 fli4l kern.notice kernel: Notice: NX (Execute Disable)
protection missing in CPU!
Feb 22 15:29:17 fli4l kern.info kernel: DMI not present or invalid.
Feb 22 15:29:17 fli4l kern.debug kernel: e820: update [mem
0x00000000-0x00000fff] usable ==> reserved
Feb 22 15:29:17 fli4l kern.debug kernel: e820: remove [mem
0x000a0000-0x000fffff] usable
Feb 22 15:29:17 fli4l kern.info kernel: e820: last_pfn = 0x8000
max_arch_pfn = 0x100000
Feb 22 15:29:17 fli4l kern.debug kernel: initial memory mapped: [mem
0x00000000-0x017fffff]
Feb 22 15:29:17 fli4l kern.debug kernel: Base memory trampoline at
[c009b000] 9b000 size 16384
Feb 22 15:29:17 fli4l kern.info kernel: init_memory_mapping: [mem
0x00000000-0x000fffff]
Feb 22 15:29:17 fli4l kern.debug kernel: [mem 0x00000000-0x000fffff]
page 4k
Feb 22 15:29:17 fli4l kern.info kernel: init_memory_mapping: [mem
0x07800000-0x07bfffff]
Feb 22 15:29:17 fli4l kern.debug kernel: [mem 0x07800000-0x07bfffff]
page 4k
Feb 22 15:29:17 fli4l kern.debug kernel: BRK [0x014a2000, 0x014a2fff]
PGTABLE
Feb 22 15:29:17 fli4l kern.info kernel: init_memory_mapping: [mem
0x00100000-0x077fffff]
Feb 22 15:29:17 fli4l kern.debug kernel: [mem 0x00100000-0x077fffff]
page 4k
Feb 22 15:29:17 fli4l kern.info kernel: init_memory_mapping: [mem
0x07c00000-0x07ffffff]
Feb 22 15:29:17 fli4l kern.debug kernel: [mem 0x07c00000-0x07ffffff]
page 4k
Feb 22 15:29:17 fli4l kern.debug kernel: BRK [0x014a3000, 0x014a3fff]
PGTABLE
Feb 22 15:29:17 fli4l kern.info kernel: RAMDISK: [mem 0x07e44000-0x07ffefff]
Feb 22 15:29:17 fli4l kern.notice kernel: 0MB HIGHMEM available.
Feb 22 15:29:17 fli4l kern.notice kernel: 128MB LOWMEM available.
Feb 22 15:29:17 fli4l kern.info kernel: mapped low ram: 0 - 08000000
Feb 22 15:29:17 fli4l kern.info kernel: low ram: 0 - 08000000
Feb 22 15:29:17 fli4l kern.debug kernel: BRK [0x014a4000, 0x014a4fff]
PGTABLE
Feb 22 15:29:17 fli4l kern.warn kernel: Zone ranges:
Feb 22 15:29:17 fli4l kern.warn kernel: DMA [mem
0x00001000-0x00ffffff]
Feb 22 15:29:17 fli4l kern.warn kernel: Normal [mem
0x01000000-0x07ffffff]
Feb 22 15:29:17 fli4l kern.warn kernel: HighMem empty
Feb 22 15:29:17 fli4l kern.warn kernel: Movable zone start for each node
Feb 22 15:29:17 fli4l kern.warn kernel: Early memory node ranges
Feb 22 15:29:17 fli4l kern.warn kernel: node 0: [mem
0x00001000-0x0009ffff]
Feb 22 15:29:17 fli4l kern.warn kernel: node 0: [mem
0x00100000-0x07ffffff]
Feb 22 15:29:17 fli4l kern.debug kernel: On node 0 totalpages: 32671
Feb 22 15:29:17 fli4l kern.debug kernel: free_area_init_node: node 0,
pgdat c13c0820, node_mem_map c7d44020
Feb 22 15:29:17 fli4l kern.debug kernel: DMA zone: 32 pages used for
memmap
Feb 22 15:29:17 fli4l kern.debug kernel: DMA zone: 0 pages reserved
Feb 22 15:29:17 fli4l kern.debug kernel: DMA zone: 3999 pages, LIFO
batch:0
Feb 22 15:29:17 fli4l kern.debug kernel: Normal zone: 224 pages used
for memmap
Feb 22 15:29:17 fli4l kern.debug kernel: Normal zone: 28672 pages,
LIFO batch:7
Feb 22 15:29:17 fli4l kern.info kernel: Using APIC driver default
Feb 22 15:29:17 fli4l kern.info kernel: SFI: Simple Firmware Interface
v0.81 http://simplefirmware.org
Feb 22 15:29:17 fli4l kern.info kernel: smpboot: Allowing 1 CPUs, 0
hotplug CPUs
Feb 22 15:29:17 fli4l kern.info kernel: No local APIC present or
hardware disabled
Feb 22 15:29:17 fli4l kern.info kernel: APIC: disable apic facility
Feb 22 15:29:17 fli4l kern.info kernel: APIC: switched to apic NOOP
Feb 22 15:29:17 fli4l kern.debug kernel: nr_irqs_gsi: 16
Feb 22 15:29:17 fli4l kern.info kernel: e820: [mem
0x08000000-0xffefffff] available for PCI devices
Feb 22 15:29:17 fli4l kern.info kernel: setup_percpu: NR_CPUS:4
nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
Feb 22 15:29:17 fli4l kern.info kernel: PERCPU: Embedded 12 pages/cpu
@c7d36000 s25952 r0 d23200 u49152
Feb 22 15:29:17 fli4l kern.debug kernel: pcpu-alloc: s25952 r0 d23200
u49152 alloc=12*4096
Feb 22 15:29:17 fli4l kern.debug kernel: pcpu-alloc: [0] 0
Feb 22 15:29:17 fli4l kern.warn kernel: Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 32415
Feb 22 15:29:17 fli4l kern.notice kernel: Kernel command line:
load_ramdisk=1 initrd=rootfs.img fli4l_mode=normal console=ttyS0,38400n8
nokbd reboot=bios printk.time=0 ipv6.disable=1 acpi=off BOOT_IMAGE=kernel
Feb 22 15:29:17 fli4l kern.info kernel: PID hash table entries: 512
(order: -1, 2048 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: Dentry cache hash table entries:
16384 (order: 4, 65536 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: Inode-cache hash table entries:
8192 (order: 3, 32768 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: Initializing CPU#0
Feb 22 15:29:17 fli4l kern.info kernel: Initializing HighMem for node 0
(00000000:00000000)
Feb 22 15:29:17 fli4l kern.warn kernel: Memory: 122792K/130684K
available (2723K kernel code, 208K rwdata, 940K rodata, 396K init, 432K
bss, 7892K reserved, 0K highmem)
Feb 22 15:29:17 fli4l kern.info kernel: virtual kernel memory layout:
Feb 22 15:29:17 fli4l kern.info kernel: fixmap : 0xfff66000 -
0xfffff000 ( 612 kB)
Feb 22 15:29:17 fli4l kern.info kernel: pkmap : 0xff800000 -
0xffc00000 (4096 kB)
Feb 22 15:29:17 fli4l kern.info kernel: vmalloc : 0xc8800000 -
0xff7fe000 ( 879 MB)
Feb 22 15:29:17 fli4l kern.info kernel: lowmem : 0xc0000000 -
0xc8000000 ( 128 MB)
Feb 22 15:29:17 fli4l kern.info kernel: .init : 0xc13cb000 -
0xc142e000 ( 396 kB)
Feb 22 15:29:17 fli4l kern.info kernel: .data : 0xc12a9106 -
0xc13ca340 (1156 kB)
Feb 22 15:29:17 fli4l kern.info kernel: .text : 0xc1000000 -
0xc12a9106 (2724 kB)
Feb 22 15:29:17 fli4l kern.info kernel: Checking if this processor
honours the WP bit even in supervisor mode...Ok.
Feb 22 15:29:17 fli4l kern.info kernel: SLUB: HWalign=32, Order=0-3,
MinObjects=0, CPUs=1, Nodes=1
Feb 22 15:29:17 fli4l kern.info kernel: Hierarchical RCU implementation.
Feb 22 15:29:17 fli4l kern.info kernel: RCU dyntick-idle grace-period
acceleration is enabled.
Feb 22 15:29:17 fli4l kern.info kernel: RCU restricting CPUs from
NR_CPUS=4 to nr_cpu_ids=1.
Feb 22 15:29:17 fli4l kern.info kernel: RCU: Adjusting geometry for
rcu_fanout_leaf=16, nr_cpu_ids=1
Feb 22 15:29:17 fli4l kern.info kernel: NR_IRQS:2304 nr_irqs:256 16
Feb 22 15:29:17 fli4l kern.debug kernel: CPU 0 irqstacks, hard=c7406000
soft=c7408000
Feb 22 15:29:17 fli4l kern.info kernel: Console: colour dummy device 80x25
Feb 22 15:29:17 fli4l kern.info kernel: console [ttyS0] enabled
Feb 22 15:29:17 fli4l kern.info kernel: tsc: Fast TSC calibration using PIT
Feb 22 15:29:17 fli4l kern.info kernel: tsc: Detected 266.666 MHz processor
Feb 22 15:29:17 fli4l kern.info kernel: Calibrating delay loop
(skipped), value calculated using timer frequency.. 533.33 BogoMIPS
(lpj=2666660)
Feb 22 15:29:17 fli4l kern.info kernel: pid_max: default: 32768 minimum: 301
Feb 22 15:29:17 fli4l kern.info kernel: Mount-cache hash table entries:
1024 (order: 0, 4096 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: Mountpoint-cache hash table
entries: 1024 (order: 0, 4096 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: Last level iTLB entries: 4KB 0,
2MB 0, 4MB 0
Feb 22 15:29:17 fli4l kern.info kernel: Last level dTLB entries: 4KB 0,
2MB 0, 4MB 0, 1GB 0
Feb 22 15:29:17 fli4l kern.info kernel: tlb_flushall_shift: -1
Feb 22 15:29:17 fli4l kern.info kernel: Freeing SMP alternatives memory:
8K (c142e000 - c1430000)
Feb 22 15:29:17 fli4l kern.warn kernel: smpboot: weird, boot CPU (#0)
not listed by the BIOS
Feb 22 15:29:17 fli4l kern.notice kernel: smpboot: SMP motherboard not
detected
Feb 22 15:29:17 fli4l kern.notice kernel: smpboot: Local APIC not
detected. Using dummy APIC emulation.
Feb 22 15:29:17 fli4l kern.info kernel: smpboot: SMP disabled
Feb 22 15:29:17 fli4l kern.info kernel: Performance Events: no PMU
driver, software events only.
Feb 22 15:29:17 fli4l kern.info kernel: x86: Booted up 1 node, 1 CPUs
Feb 22 15:29:17 fli4l kern.info kernel: smpboot: Total of 1 processors
activated (533.33 BogoMIPS)
Feb 22 15:29:17 fli4l kern.info kernel: NET: Registered protocol family 16
Feb 22 15:29:17 fli4l kern.info kernel: cpuidle: using governor ladder
Feb 22 15:29:17 fli4l kern.info kernel: cpuidle: using governor menu
Feb 22 15:29:17 fli4l kern.info kernel: PCI: PCI BIOS revision 2.10
entry at 0xfc44b, last bus=0
Feb 22 15:29:17 fli4l kern.info kernel: PCI: Using configuration type 1
for base access
Feb 22 15:29:17 fli4l kern.info kernel: bio: create slab <bio-0> at 0
Feb 22 15:29:17 fli4l kern.info kernel: ACPI: Interpreter disabled.
Feb 22 15:29:17 fli4l kern.info kernel: vgaarb: loaded
Feb 22 15:29:17 fli4l kern.warn kernel: PCI: Probing PCI hardware
Feb 22 15:29:17 fli4l kern.debug kernel: PCI: root bus 00: using default
resources
Feb 22 15:29:17 fli4l kern.debug kernel: PCI: Probing PCI hardware (bus 00)
Feb 22 15:29:17 fli4l kern.info kernel: PCI host bridge to bus 0000:00
Feb 22 15:29:17 fli4l kern.info kernel: pci_bus 0000:00: root bus
resource [io 0x0000-0xffff]
Feb 22 15:29:17 fli4l kern.info kernel: pci_bus 0000:00: root bus
resource [mem 0x00000000-0xffffffff]
Feb 22 15:29:17 fli4l kern.info kernel: pci_bus 0000:00: No busn
resource found for root bus, will use [bus 00-ff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:00.0: [1078:0001]
type 00 class 0x060000
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0d.0: [168c:001a]
type 00 class 0x020000
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0d.0: reg 0x10:
[mem 0x80000000-0x8000ffff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0e.0: [100b:0020]
type 00 class 0x020000
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0e.0: reg 0x10: [io
0x1000-0x10ff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0e.0: reg 0x14:
[mem 0x80040000-0x80040fff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0e.0: reg 0x30:
[mem 0x00000000-0x0000ffff pref]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0e.0: supports D1 D2
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0e.0: PME#
supported from D0 D1 D2 D3hot
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0f.0: [100b:0020]
type 00 class 0x020000
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0f.0: reg 0x10: [io
0x1400-0x14ff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0f.0: reg 0x14:
[mem 0x80080000-0x80080fff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0f.0: reg 0x30:
[mem 0x00000000-0x0000ffff pref]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0f.0: supports D1 D2
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:0f.0: PME#
supported from D0 D1 D2 D3hot
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:10.0: [100b:0020]
type 00 class 0x020000
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:10.0: reg 0x10: [io
0x1800-0x18ff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:10.0: reg 0x14:
[mem 0x800c0000-0x800c0fff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:10.0: reg 0x30:
[mem 0x00000000-0x0000ffff pref]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:10.0: supports D1 D2
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:10.0: PME#
supported from D0 D1 D2 D3hot
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.0: [100b:0510]
type 00 class 0x060100
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.0: reg 0x10: [io
0xf400-0xf43f]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.0: reg 0x14: [io
0xf600-0xf63f]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.1: [100b:0511]
type 00 class 0x068000
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.1: reg 0x10: [io
0xf000-0xf0ff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.2: [100b:0502]
type 00 class 0x010180
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.2: reg 0x20: [io
0xfc00-0xfc0f]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.3: [100b:0503]
type 00 class 0x040100
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.3: reg 0x10:
[mem 0x40011000-0x40011fff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.5: [100b:0515]
type 00 class 0x068000
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x10: [io
0xf200-0xf23f]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x14:
[mem 0x08030000-0x0803003f]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x18:
[mem 0x08030040-0x0803007f]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x1c:
[mem 0x08030080-0x080300bf]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x20:
[mem 0x080300c0-0x080300ff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:12.5: reg 0x24:
[mem 0x08030100-0x0803013f]
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:13.0: [0e11:a0f8]
type 00 class 0x0c0310
Feb 22 15:29:17 fli4l kern.debug kernel: pci 0000:00:13.0: reg 0x10:
[mem 0xf0000000-0xf0000fff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci_bus 0000:00: busn_res: [bus
00-ff] end is updated to 00
Feb 22 15:29:17 fli4l kern.debug kernel: PCI: pci_cache_line_size set to
32 bytes
Feb 22 15:29:17 fli4l kern.info kernel: Switched to clocksource pit
Feb 22 15:29:17 fli4l kern.info kernel: pnp: PnP ACPI: disabled
Feb 22 15:29:17 fli4l kern.info kernel: PnPBIOS: Scanning system for PnP
BIOS support...
Feb 22 15:29:17 fli4l kern.info kernel: PnPBIOS: PnP BIOS support was
not detected.
Feb 22 15:29:17 fli4l kern.info kernel: pci 0000:00:0e.0: BAR 6:
assigned [mem 0x08000000-0x0800ffff pref]
Feb 22 15:29:17 fli4l kern.info kernel: pci 0000:00:0f.0: BAR 6:
assigned [mem 0x08010000-0x0801ffff pref]
Feb 22 15:29:17 fli4l kern.info kernel: pci 0000:00:10.0: BAR 6:
assigned [mem 0x08020000-0x0802ffff pref]
Feb 22 15:29:17 fli4l kern.debug kernel: pci_bus 0000:00: resource 4 [io
0x0000-0xffff]
Feb 22 15:29:17 fli4l kern.debug kernel: pci_bus 0000:00: resource 5
[mem 0x00000000-0xffffffff]
Feb 22 15:29:17 fli4l kern.info kernel: NET: Registered protocol family 2
Feb 22 15:29:17 fli4l kern.info kernel: TCP established hash table
entries: 1024 (order: 0, 4096 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: TCP bind hash table entries:
1024 (order: 1, 8192 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: TCP: Hash tables configured
(established 1024 bind 1024)
Feb 22 15:29:17 fli4l kern.info kernel: TCP: reno registered
Feb 22 15:29:17 fli4l kern.info kernel: UDP hash table entries: 256
(order: 1, 8192 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: UDP-Lite hash table entries: 256
(order: 1, 8192 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: NET: Registered protocol family 1
Feb 22 15:29:17 fli4l kern.info kernel: pci 0000:00:13.0: enabling
device (0000 -> 0002)
Feb 22 15:29:17 fli4l kern.debug kernel: PCI: CLS 32 bytes, default 32
Feb 22 15:29:17 fli4l kern.info kernel: Trying to unpack rootfs image as
initramfs...
Feb 22 15:29:17 fli4l kern.info kernel: Freeing initrd memory: 1772K
(c7e44000 - c7fff000)
Feb 22 15:29:17 fli4l kern.info kernel: platform rtc_cmos: registered
platform RTC device (no PNP device found)
Feb 22 15:29:17 fli4l kern.info kernel: futex hash table entries: 256
(order: 1, 8192 bytes)
Feb 22 15:29:17 fli4l kern.info kernel: msgmni has been set to 243
Feb 22 15:29:17 fli4l kern.info kernel: Block layer SCSI generic (bsg)
driver version 0.4 loaded (major 252)
Feb 22 15:29:17 fli4l kern.info kernel: io scheduler noop registered
Feb 22 15:29:17 fli4l kern.info kernel: io scheduler cfq registered
(default)
Feb 22 15:29:17 fli4l kern.info kernel: isapnp: Scanning for PnP cards...
Feb 22 15:29:17 fli4l kern.info kernel: isapnp: No Plug & Play device found
Feb 22 15:29:17 fli4l kern.info kernel: Serial: 8250/16550 driver, 4
ports, IRQ sharing enabled
Feb 22 15:29:17 fli4l kern.info kernel: serial8250: ttyS0 at I/O 0x3f8
(irq = 4, base_baud = 921600) is a NS16550A
Feb 22 15:29:17 fli4l kern.info kernel: brd: module loaded
Feb 22 15:29:17 fli4l kern.info kernel: loop: module loaded
Feb 22 15:29:17 fli4l kern.info kernel: i8042: PNP: No PS/2 controller
found. Probing ports directly.
Feb 22 15:29:17 fli4l kern.err kernel: i8042: No controller found
Feb 22 15:29:17 fli4l kern.info kernel: rtc_cmos rtc_cmos: rtc core:
registered rtc_cmos as rtc0
Feb 22 15:29:17 fli4l kern.info kernel: rtc_cmos rtc_cmos: alarms up to
one day, 114 bytes nvram
Feb 22 15:29:17 fli4l kern.info kernel: Netfilter messages via NETLINK
v0.30.
Feb 22 15:29:17 fli4l kern.info kernel: nfnl_acct: registering with
nfnetlink.
Feb 22 15:29:17 fli4l kern.info kernel: nf_conntrack version 0.5.0 (1946
buckets, 7784 max)
Feb 22 15:29:17 fli4l kern.info kernel: ctnetlink v0.93: registering
with nfnetlink.
Feb 22 15:29:17 fli4l kern.info kernel: nf_tables: (c) 2007-2009 Patrick
McHardy <kaber at trash.net>
Feb 22 15:29:17 fli4l kern.info kernel: xt_time: kernel timezone is -0000
Feb 22 15:29:17 fli4l kern.notice kernel: ip_set: protocol 6
Feb 22 15:29:17 fli4l kern.info kernel: ip_tables: (C) 2000-2006
Netfilter Core Team
Feb 22 15:29:17 fli4l kern.info kernel: ipt_CLUSTERIP: ClusterIP Version
0.8 loaded successfully
Feb 22 15:29:17 fli4l kern.info kernel: arp_tables: (C) 2002 David S. Miller
Feb 22 15:29:17 fli4l kern.info kernel: TCP: cubic registered
Feb 22 15:29:17 fli4l kern.info kernel: IPv6: Loaded, but
administratively disabled, reboot required to enable
Feb 22 15:29:17 fli4l kern.info kernel: ip6_tables: (C) 2000-2006
Netfilter Core Team
Feb 22 15:29:17 fli4l kern.info kernel: NET: Registered protocol family 17
Feb 22 15:29:17 fli4l kern.info kernel: Using IPI No-Shortcut mode
Feb 22 15:29:17 fli4l kern.info kernel: Switched to clocksource tsc
Feb 22 15:29:17 fli4l kern.info kernel: console [netcon0] enabled
Feb 22 15:29:17 fli4l kern.info kernel: netconsole: network logging started
Feb 22 15:29:17 fli4l kern.info kernel: Freeing unused kernel memory:
396K (c13cb000 - c142e000)
Feb 22 15:29:17 fli4l kern.info kernel: Write protecting the kernel
text: 2728k
Feb 22 15:29:17 fli4l kern.info kernel: Write protecting the kernel
read-only data: 944k
Feb 22 15:29:17 fli4l kern.warn kernel: Clocksource tsc unstable (delta
= -423936656 ns)
Feb 22 15:29:17 fli4l kern.info kernel: Switched to clocksource pit
Feb 22 15:29:17 fli4l kern.notice kernel: random: sed urandom read with
18 bits of entropy available
Feb 22 15:29:17 fli4l kern.notice kernel: SCSI subsystem initialized
Feb 22 15:29:17 fli4l kern.debug kernel: libata version 3.00 loaded.
Feb 22 15:29:17 fli4l kern.info kernel: scsi0 : ata_generic
Feb 22 15:29:17 fli4l kern.info kernel: scsi1 : ata_generic
Feb 22 15:29:17 fli4l kern.info kernel: ata1: PATA max UDMA/100 cmd
0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Feb 22 15:29:17 fli4l kern.info kernel: ata2: PATA max UDMA/100 cmd
0x170 ctl 0x376 bmdma 0xfc08 irq 15
Feb 22 15:29:17 fli4l kern.info kernel: ata1.00: CFA: SanDisk SDCFB-32,
Vdg 1.23, max PIO4
Feb 22 15:29:17 fli4l kern.info kernel: ata1.00: 62720 sectors, multi 0:
LBA
Feb 22 15:29:17 fli4l kern.info kernel: ata1.00: configured for PIO
Feb 22 15:29:17 fli4l kern.notice kernel: scsi 0:0:0:0: Direct-Access
ATA SanDisk SDCFB-32 Vdg PQ: 0 ANSI: 5
Feb 22 15:29:17 fli4l kern.notice kernel: sd 0:0:0:0: [sda] 62720
512-byte logical blocks: (32.1 MB/30.6 MiB)
Feb 22 15:29:17 fli4l kern.notice kernel: sd 0:0:0:0: [sda] Write
Protect is off
Feb 22 15:29:17 fli4l kern.debug kernel: sd 0:0:0:0: [sda] Mode Sense:
00 3a 00 00
Feb 22 15:29:17 fli4l kern.notice kernel: sd 0:0:0:0: [sda] Write cache:
disabled, read cache: enabled, doesn't support DPO or FUA
Feb 22 15:29:17 fli4l kern.info kernel: sda: sda1
Feb 22 15:29:17 fli4l kern.notice kernel: sd 0:0:0:0: [sda] Attached
SCSI removable disk
Feb 22 15:29:17 fli4l kern.notice kernel: random: nonblocking pool is
initialized
Feb 22 15:29:17 fli4l kern.info kernel: NatSemi SCx200 Driver
Feb 22 15:29:17 fli4l kern.info kernel: GPIO base 0xf400
Feb 22 15:29:17 fli4l kern.info kernel: Configuration Block base 0x9000
Feb 22 15:29:17 fli4l kern.info kernel: scx200_wdt: timer margin 60 seconds
Feb 22 15:29:17 fli4l user.warn kernel: 411 mdev usb helper started as
'/lib/mdev/usb' in '/dev', MDEV '0-0048', ACTION 'add', DEVPATH
'/devices/i2c-0/0-0048', SUBSYSTEM 'i2c'
Feb 22 15:29:17 fli4l kern.info kernel: load SCX200 GPIO driver module
Feb 22 15:29:17 fli4l kern.info kernel: SCX200 GPIO driver module loaded
Feb 22 15:29:17 fli4l kern.info kernel: scx200_wdt: timer margin 20 seconds
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: Calling CRDA to update
world regulatory domain
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: World regulatory
domain updated:
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: DFS Master region: unset
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (2402000 KHz -
2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (2457000 KHz -
2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (2474000 KHz -
2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5170000 KHz -
5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5250000 KHz -
5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5490000 KHz -
5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5735000 KHz -
5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (57240000 KHz -
63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: natsemi dp8381x driver, version
2.1, Sept 11, 2006
Feb 22 15:29:17 fli4l kern.info kernel: originally by Donald Becker
<becker at scyld.com>
Feb 22 15:29:17 fli4l kern.info kernel: 2.4.x kernel port by Jeff
Garzik, Tjeerd Mulder
Feb 22 15:29:17 fli4l kern.info kernel: natsemi eth0: NatSemi DP8381[56]
at 0x80040000 (0000:00:0e.0), 00:0d:b9:02:c8:44, IRQ 10, port TP.
Feb 22 15:29:17 fli4l kern.info kernel: natsemi eth1: NatSemi DP8381[56]
at 0x80080000 (0000:00:0f.0), 00:0d:b9:02:c8:45, IRQ 9, port TP.
Feb 22 15:29:17 fli4l kern.info kernel: natsemi eth2: NatSemi DP8381[56]
at 0x800c0000 (0000:00:10.0), 00:0d:b9:02:c8:46, IRQ 11, port TP.
Feb 22 15:29:17 fli4l kern.info kernel: ath5k 0000:00:0d.0: registered
as 'phy0'
Feb 22 15:29:17 fli4l kern.debug kernel: ath: EEPROM regdomain: 0x0
Feb 22 15:29:17 fli4l kern.debug kernel: ath: EEPROM indicates default
country code should be used
Feb 22 15:29:17 fli4l kern.debug kernel: ath: doing EEPROM
country->regdmn map search
Feb 22 15:29:17 fli4l kern.debug kernel: ath: country maps to regdmn
code: 0x3a
Feb 22 15:29:17 fli4l kern.debug kernel: ath: Country alpha2 being used: US
Feb 22 15:29:17 fli4l kern.debug kernel: ath: Regpair used: 0x3a
Feb 22 15:29:17 fli4l kern.debug kernel: ieee80211 phy0: Selected rate
control algorithm 'minstrel_ht'
Feb 22 15:29:17 fli4l kern.info kernel: ath5k: phy0: Atheros AR2413 chip
found (MAC: 0x78, PHY: 0x45)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: Calling CRDA for
country: US
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: Regulatory domain
changed to country: US
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: DFS Master region: FCC
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (2402000 KHz -
2472000 KHz @ 40000 KHz), (N/A, 3000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5170000 KHz -
5250000 KHz @ 80000 KHz), (N/A, 1700 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5250000 KHz -
5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5735000 KHz -
5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (57240000 KHz -
63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: Calling CRDA for
country: DE
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: Regulatory domain
changed to country: DE
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: DFS Master region: ETSI
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (start_freq -
end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (2400000 KHz -
2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5150000 KHz -
5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5250000 KHz -
5350000 KHz @ 80000 KHz), (N/A, 2000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (5470000 KHz -
5725000 KHz @ 160000 KHz), (N/A, 2698 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: cfg80211: (57000000 KHz -
66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
Feb 22 15:29:17 fli4l kern.info kernel: eth0: DSPCFG accepted after 0 usec.
Feb 22 15:29:17 fli4l kern.notice kernel: eth0: link up.
Feb 22 15:29:17 fli4l kern.info kernel: eth0: Setting full-duplex based
on negotiated link capability.
Feb 22 15:29:17 fli4l kern.info kernel: eth2: DSPCFG accepted after 0 usec.
Feb 22 15:29:19 fli4l kern.info kernel: eth1: DSPCFG accepted after 0 usec.
Feb 22 15:29:19 fli4l kern.notice kernel: eth1: link up.
Feb 22 15:29:19 fli4l kern.info kernel: eth1: Setting full-duplex based
on negotiated link capability.
Feb 22 15:29:19 fli4l kern.info kernel: PPP generic driver version 2.4.2
Feb 22 15:29:19 fli4l kern.info kernel: NET: Registered protocol family 24
Feb 22 15:29:25 fli4l local2.info pppd[1471]: Plugin rp-pppoe.so loaded.
Feb 22 15:29:25 fli4l local2.notice pppd[1471]: pppd 2.4.6 started by
root, uid 0
Feb 22 15:29:25 fli4l local2.info pppd[1471]: Using interface ppp0
Feb 22 15:29:25 fli4l local2.notice pppd[1471]: local IP address
10.112.112.112
Feb 22 15:29:25 fli4l local2.notice pppd[1471]: remote IP address
10.112.112.113
Feb 22 15:29:47 fli4l daemon.info hostapd: wlan0: STA 9c:b7:0d:a9:15:11
IEEE 802.11: authenticated
Feb 22 15:29:47 fli4l daemon.info hostapd: wlan0: STA 9c:b7:0d:a9:15:11
IEEE 802.11: associated (aid 1)
Feb 22 15:29:50 fli4l daemon.info hostapd: wlan0: STA 9c:b7:0d:a9:15:11
RADIUS: starting accounting session 56CB1B33-00000000
Feb 22 15:29:50 fli4l daemon.info hostapd: wlan0: STA 9c:b7:0d:a9:15:11
WPA: pairwise key handshake completed (RSN)
Feb 22 15:29:54 fli4l local0.info dnsmasq[3313]: started, version 2.73
cachesize 150
Feb 22 15:29:54 fli4l local0.info dnsmasq[3313]: compile time options:
IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP conntrack
ipset auth no-DNSSEC loop-detect inotify
--- END ---
Ich hoffe ich habe nicht zuviel gekuertzt.
Wenn ich nach "ath" suche, wird im Kaltstart-log nix gefunden. Wie wenn
die Karte garnicht da ist.
Ein lspci direkt nach dem Kaltstart bringt:
fli4l 3.10.5 # lspci
00:00.0 Host bridge: Cyrix Corporation PCI Master
00:0d.0 Ethernet controller: Qualcomm Atheros Device ff16 (rev 01)
00:0d.1 Serial controller: Qualcomm Atheros Device ff96 (rev 01)
Gruss Nicky
Mehr Informationen über die Mailingliste Fli4L