[Eisfair] Fehlermeldung beim start - ata failed to enable aa

[Jens Kluge]

Hallo Thomas,
Am 19.02.2016 um 20:51 schrieb Thomas Bork:
> Am 19.02.2016 um 09:02 schrieb Jens Kluge:
>
> dmesg | grep ata

eisfair # dmesg | grep ata
[    0.000000]  BIOS-e820: 00000000dffa0000 - 00000000dffaa600 (ACPI data)
[    0.000000] Memory: 3632384k/3669632k available (3054k kernel code, 
36792k reserved, 1211k data, 404k init, 2760328k highmem)
[    0.000000]       .data : 0xc12fbae4 - 0xc142a980   (1211 kB)
[    0.000000] _OSC request data:1 7
[    0.000000] Write protecting the kernel read-only data: 1044k
[    0.000000] libata version 3.00 loaded.
[    0.000000] ata1: SATA max UDMA/133 abar m1024 at 0xfdfffc00 port 
0xfdfffd00 irq 19
[    0.000000] ata2: SATA max UDMA/133 abar m1024 at 0xfdfffc00 port 
0xfdfffd80 irq 19
[    0.000000] ata3: SATA max UDMA/133 abar m1024 at 0xfdfffc00 port 
0xfdfffe00 irq 19
[    0.000000] ata4: SATA max UDMA/133 abar m1024 at 0xfdfffc00 port 
0xfdfffe80 irq 19
[    0.000000] ata5: SATA max UDMA/133 abar m1024 at 0xfdfffc00 port 
0xfdffff00 irq 19
[    0.000000] ata6: SATA max UDMA/133 abar m1024 at 0xfdfffc00 port 
0xfdffff80 irq 19
[    0.000000] ata5: SATA link down (SStatus 0 SControl 300)
[    0.000000] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.000000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.000000] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.000000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.000000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.000000] ata1.00: ATA-8: VB0250EAVER, HPG7, max UDMA/100
[    0.000000] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    0.000000] ata2.00: failed to enable AA (error_mask=0x1)
[    0.000000] ata2.00: ATA-8: VB0250EAVER, HPG9, max UDMA/100
[    0.000000] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    0.000000] ata4.00: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133
[    0.000000] ata4.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 
31/32), AA
[    0.000000] ata6.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[    0.000000] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 
31/32), AA
[    0.000000] ata3.00: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133
[    0.000000] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 
31/32), AA
[    0.000000] ata2.00: failed to enable AA (error_mask=0x1)
[    0.000000] ata2.00: configured for UDMA/100
[    0.000000] ata1.00: configured for UDMA/100
[    0.000000] ata3.00: configured for UDMA/133
[    0.000000] ata6.00: configured for UDMA/133
[    0.000000] ata4.00: configured for UDMA/133
[    0.000000] EXT4-fs (md3): mounted filesystem with ordered data mode. 
Opts: (null)
[    0.000000] EXT4-fs (md1): mounted filesystem with ordered data mode. 
Opts: errors=remount-ro
[    0.000000] EXT4-fs (md4): mounted filesystem with ordered data mode. 
Opts: (null)
[    0.000000] EXT4-fs (sdc1): mounted filesystem with ordered data 
mode. Opts: (null)
[    0.000000] EXT4-fs (sdd1): mounted filesystem with ordered data 
mode. Opts: (null)
[    0.000000] EXT3-fs (sde1): mounted filesystem with writeback data mode


>
> nach dem Boot des Kernels vom Installer und des 2.18.0 gesehen.
Welcome to eisfair!
base     : 2.6.8
eiskernel: 2.18.0 (3.2.75-eisfair-1-SMP)

>
> Der aktuelle Installer kommt mit eiskernel 2.16.0 (internes
> Vanilla-Patchlevel 3.2.74) und der 2.18.0 hat das interne
> Vanilla-Patchlevel 3.2.76.
>
Die anderen Tipps sehe ich mir an, sobald ich mehr Zeit habe
Danke und Grüße
Jens