[Eisfair] Fehlermeldung beim start - ata failed to enable aa
Thomas Bork
tom at eisfair.org
Fr Feb 19 20:51:35 CET 2016
Am 19.02.2016 um 09:02 schrieb Jens Kluge:
>> Und dann tritt wieder
>> eisfair kernel: ata2.00: failed to enable AA (error_mask=0x1)
>> eisfair kernel: ata2.00: ATA-8: VB0250EAVER, HPG9, max UDMA/100
>> eisfair kernel: ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth
>> 31/32)
>> auf?
> ja; genau dieselben Fehlermeldungen im logfile, aber erst nachdem auf
> auf den neuen 2.8.10 SMP-Kernel upgedated hatte.
Ich hätte gern einmal
dmesg | grep ata
nach dem Boot des Kernels vom Installer und des 2.18.0 gesehen.
Der aktuelle Installer kommt mit eiskernel 2.16.0 (internes
Vanilla-Patchlevel 3.2.74) und der 2.18.0 hat das interne
Vanilla-Patchlevel 3.2.76.
In 3.2.75 sehe ich folgende Änderung:
1.
https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=01cbe992f8da9115b1094a1b5055f7d1cbadff71
Existiert in Deinem Rechner ein Port Multiplier?
Natürlich könnte man die Platte auch in die Blacklist für AA stecken,
wie eine Variante mit älterer Firmware wie hier:
https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/drivers/ata?id=3d27f59a06f2a62533ed5f7b615ef130ede9e082
Ich frage mich aber, warum das Problem erst mit 3.2.76 auftreten soll.
Ich kann mir nur vorstellen, dass 1. die Ursache dafür ist.
Hast Du Dir den geposteten Link
http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_0a5b4d291ae045b1a5c679d618
schon mal angesehen? Hier gibt es neue Firmware für die problematische
Platte.
Aus der Beschreibung:
Problems Fixed:
This firmware corrects the possibility of the drive becoming
unresponsive and requiring a power cycle following a soft system reboot.
This behavior appears as if the drive is no longer attached to the
system following the system soft reboot. It is most often observed
during Operating System Installation but can occur following any system
soft reboot.
Und es gibt mehrere Revisionen der Firmware HPG9, nämlich die
ursprüngliche Version HPG9, HPG9 (B) und HPG9 (C)...
--
der tom
[eisfair-team]
Mehr Informationen über die Mailingliste Eisfair