[Fli4l_dev] Update von "fli4l-4.0.0-r56979-testing" auf "4.1.0--2025-12-13" OpenVPN funktioniert nicht
Martin Faderbauer
martin at fmit.at
Mi Dez 17 20:39:14 CET 2025
Am 17.12.2025 um 19:45 schrieb Harvey:
> Martin,
>
>> Wed Dec 17 2025 17:23:39 2025-12-17 17:23:39 DEPRECATED
>> OPTION: The option --secret is deprecated.
>> Wed Dec 17 2025 17:23:39 2025-12-17 17:23:39 WARNING:
>> Compression for receiving enabled. Compression has been used in the
>> past to break encryption. Sent packets are not compressed unless
>> "allow- compression yes" is also set.
>
> diese Meldungen sind normal und unproblematisch (noch). Sie ändern
> nichts an der Funktionsfähigkeit.
>
> Du vernetzt 2 fli4l per Tunnel? Sind beide auf dem gleichen Stand?
>
> Gern ein Fehler sind die Firewall-Regeln.
>
> Du kannst mal deine openvpn.txt zeigen, wenn Du willst, natürlich
> anonymisiert. Zusätzlich auch, was Du in den Paketfilter-Regeln in der
> base.txt hast.
>
>
>
> Gruß
> Harvey
Packet filter configuration
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# INPUT chain
#------------------------------------------------------------------------------
PF_INPUT_POLICY='REJECT' # be nice and use reject as policy
PF_INPUT_ACCEPT_DEF='yes' # use default rule set
PF_INPUT_LOG='no' # don't log at all
PF_INPUT_LOG_LIMIT='3/minute:5' # log 3 events per minute; allow a burst
of 5
# events
PF_INPUT_REJ_LIMIT='1/second:5' # reject 1 connection per second; allow
a burst
# of 5 events; otherwise drop packet
PF_INPUT_UDP_REJ_LIMIT='1/second:5'
# reject 1 udp packet per second; allow
a burst
# of 5 events; otherwise drop packet
PF_INPUT[1]='IP_NET_1 ACCEPT' # allow all hosts in the local network to
# access the router
PF_INPUT[2]='IP_NET_2 ACCEPT'
PF_INPUT[3]='3048 ACCEPT' # allow all hosts in the local Elba
PF_INPUT[4]='4158 ACCEPT' # allow all hosts in the local AVG
PF_INPUT[5]='7074 ACCEPT' # allow all hosts in the local AVG
PF_INPUT[6]='7500 ACCEPT' # allow all hosts in the local AVG
# network access to the router
PF_INPUT[7]='tmpl:samba DROP NOLOG' # drop (or reject) samba access
# drop (or reject) samba access
#{
# COMMENT='no samba traffic allowed'
# without logging, otherwise the log
file will
# be filled with useless entries
#}
PF6_INPUT_POLICY='REJECT' # be nice and use reject as policy
PF6_INPUT_ACCEPT_DEF='yes' # use default rule set
PF6_INPUT_LOG='no' # don't log anything
PF6_INPUT_LOG_LIMIT='3/minute:5'
# log 3 events per minute; allow a
burst of 5
# events
PF6_INPUT_REJ_LIMIT='1/second:5'
# reject 1 connection per second; allow
a burst
# of 5 events; otherwise drop packet
PF6_INPUT_UDP_REJ_LIMIT='1/second:5'
# reject 1 udp packet per second; allow
a burst
# of 5 events; otherwise drop packet
#PF6_INPUT[]='[fe80::0/10] ACCEPT'
# allow all hosts in the local network to
# access the router
#PF6_INPUT[]='IPV6_NET_1 ACCEPT'
# allow all hosts in the first subnet
to access
# the router
#PF6_INPUT[]='tmpl:samba DROP NOLOG'
# drop (or reject) samba access
#{
# COMMENT='no samba traffic allowed'
# without logging, otherwise the log
file will
# be filled with useless entries
#}
#------------------------------------------------------------------------------
# FORWARD chain
#------------------------------------------------------------------------------
PF_FORWARD_POLICY='REJECT' # be nice and use reject as policy
PF_FORWARD_ACCEPT_DEF='yes' # use default rule set
PF_FORWARD_LOG='no' # don't log at all
PF_FORWARD_LOG_LIMIT='3/minute:5'
# log 3 events per minute; allow a
burst of 5
# events
PF_FORWARD_REJ_LIMIT='1/second:5'
# reject 1 connection per second; allow
a burst
# of 5 events; otherwise drop packet
PF_FORWARD_UDP_REJ_LIMIT='1/second:5'
# reject 1 udp packet per second; allow
a burst
PF_FORWARD[1]='IP_NET_1 ACCEPT' # accept everything else
PF_FORWARD[2]='tmpl:samba DROP' # drop samba traffic if it tries
PF_FORWARD[3]='IP_NET_2 ACCEPT' # accept everything else
# of 5 events; otherwise drop packet
PF6_FORWARD_POLICY='REJECT' # be nice and use reject as policy
PF6_FORWARD_ACCEPT_DEF='yes' # use default rule set
PF6_FORWARD_LOG='no' # don't log anything
PF6_FORWARD_LOG_LIMIT='3/minute:5'
# log 3 events per minute; allow a
burst of 5
# events
PF6_FORWARD_REJ_LIMIT='1/second:5'
# reject 1 connection per second; allow
a burst
# of 5 events; otherwise drop packet
PF6_FORWARD_UDP_REJ_LIMIT='1/second:5'
# reject 1 udp packet per second; allow
a burst
# of 5 events; otherwise drop packet
#PF6_FORWARD[]='tmpl:samba DROP'
# drop samba traffic if it tries to
leave the
# subnet
#PF6_FORWARD[]='IPV6_NET_1 ACCEPT'
# accept everything else
#------------------------------------------------------------------------------
# OUTPUT chain
#------------------------------------------------------------------------------
PF_OUTPUT_POLICY='ACCEPT' # default policy for outgoing packets
PF_OUTPUT_ACCEPT_DEF='yes' # use default rule set
PF_OUTPUT_LOG='no' # don't log at all
PF_OUTPUT_LOG_LIMIT='3/minute:5'
# log 3 events per minute; allow a
burst of 5
# events
PF_OUTPUT_REJ_LIMIT='1/second:5'
# reject 1 connection per second; allow
a burst
# of 5 events; otherwise drop packet
PF_OUTPUT_UDP_REJ_LIMIT='1/second:5'
# reject 1 udp packet per second; allow
a burst
# of 5 events; otherwise drop packet
#PF_OUTPUT[]='any 217.197.80.132 REJECT'
# don't allow the fli4l to reach fli4l.de
PF6_OUTPUT_POLICY='ACCEPT' # default policy for outgoing packets
PF6_OUTPUT_ACCEPT_DEF='yes' # use default rule set
PF6_OUTPUT_LOG='no' # don't log anything
PF6_OUTPUT_LOG_LIMIT='3/minute:5'
# log 3 events per minute; allow a
burst of 5
# events
PF6_OUTPUT_REJ_LIMIT='1/second:5'
# reject 1 connection per second; allow
a burst
# of 5 events; otherwise drop packet
PF6_OUTPUT_UDP_REJ_LIMIT='1/second:5'
# reject 1 udp packet per second; allow
a burst
# of 5 events; otherwise drop packet
#PF6_OUTPUT[]='any 2001:bf0:c000:a::2:132 REJECT'
# don't allow the fli4l to reach fli4l.de
#------------------------------------------------------------------------------
# POSTROUTING chain
#------------------------------------------------------------------------------
#PF_POSTROUTING[]='IP_NET_1 MASQUERADE'
# masquerade traffic leaving the subnet
#PF6_POSTROUTING[]='IPV6_NET_1 MASQUERADE'
# masquerade traffic leaving the subnet
PF_POSTROUTING[1]='IP_NET_1 MASQUERADE' # masquerade traffic leaving
PF_POSTROUTING[2]='IP_NET_2 MASQUERADE' # masquerade traffic leaving
#------------------------------------------------------------------------------
# PREROUTING chain
#------------------------------------------------------------------------------
#PF_PREROUTING[]='1.2.3.4 dynamic:22 DNAT:@client2'
# forward ssh connections coming from
1.2.3.4
# to client2
#PF6_PREROUTING[]='tmpl:ssh [2001:db8::1] DNAT:@client2'
# forward ssh connections coming from
# [2001:db8::1] to client2
PF_PREROUTING[1]='prot:tcp xxx.xxx.236.243:25 DNAT:192.168.250.20:25'
PF_PREROUTING[2]='prot:tcp xxx.xxx.236.243:143 DNAT:192.168.250.20:143'
PF_PREROUTING[3]='prot:tcp xxx.xxx.236.243:80 DNAT:192.168.250.20:80'
PF_PREROUTING[4]='prot:tcp xxx.xxx.236.243:443 DNAT:192.168.250.20:443'
PF_PREROUTING[5]='prot:tcp xxx.xxx.236.244:25 DNAT:192.168.250.20:25'
PF_PREROUTING[6]='prot:tcp xxx.xxx.236.244:143 DNAT:192.168.250.20:143'
PF_PREROUTING[7]='prot:tcp xxx.xxx.236.244:80 DNAT:192.168.250.20:80'
PF_PREROUTING[8]='prot:tcp xxx.xxx.236.244:993 DNAT:192.168.250.20:993'
PF_PREROUTING[9]='prot:tcp xxx.xxx.236.244:443 DNAT:192.168.250.20:443'
PF_PREROUTING[10]='prot:tcp xxx.xxx.236.244:465 DNAT:192.168.250.20:465'
#------------------------------------------------------------------------------
# PREROUTING_CT chain
#------------------------------------------------------------------------------
PF_PREROUTING_CT_ACCEPT_DEF='yes'
# use default rule set
#PF_PREROUTING_CT[]='tmpl:ftp IP_NET_1 HELPER:ftp'
# associate FTP conntrack helper for
active FTP
# forwarded from within the LAN to some FTP
# server outside
#PF_PREROUTING_CT[]='tmpl:ftp any dynamic HELPER:ftp'
# associate FTP conntrack helper for
passive
# FTP forwarded to the router's external IP
# (some PREROUTING rule needs to
forward the
# packets to some FTP server within the
LAN)
#PF6_PREROUTING_CT[]='tmpl:ftp IPV6_NET_1 HELPER:ftp'
# associate FTP conntrack helper for
active FTP
# forwarded from within the LAN to some FTP
# server outside
#PF6_PREROUTING_CT[]='tmpl:ftp any IPV6_NET_1 HELPER:ftp'
# associate FTP conntrack helper for
passive
# FTP forwarded to some FTP server
within the
# LAN
#------------------------------------------------------------------------------
# OUTPUT_CT chain
#------------------------------------------------------------------------------
PF_OUTPUT_CT_ACCEPT_DEF='yes' # use default rule set
#PF_OUTPUT_CT[]='tmpl:ftp HELPER:ftp'
# associate FTP conntrack helper for
outgoing
# active FTP on the router (this rule
is added
# automatically by the tools package if
# OPT_FTP='yes' and
FTP_PF_ENABLE_ACTIVE='yes')
#PF6_OUTPUT_CT[]='tmpl:ftp HELPER:ftp'
# associate FTP conntrack helper for
outgoing
# active FTP on the router (this rule
is added
# automatically by the tools package if
# OPT_FTP='yes' and
FTP_PF_ENABLE_ACTIVE='yes')
##-----------------------------------------------------------------------------
## fli4l 4.1.0--2025-12-13 - configuration for package "openvpn"
##
## P L E A S E R E A D T H E D O C U M E N T A T I O N !
##
## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N L E
S E N !
##
##-----------------------------------------------------------------------------
## Creation: 19.12.2003 babel
##
## Copyright (c) 2001-2016 - Frank Meyer, fli4l-Team <team at fli4l.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##-----------------------------------------------------------------------------
#------------------------------------------------------------------------------
# OPT_OPENVPN - used only if OPT_OPENVPN='yes'
# Look at the documentation to see how to configure an openvpn tunnel.
#------------------------------------------------------------------------------
OPT_OPENVPN='yes' # 'yes' or 'no' it's your choice
OPENVPN_EXPERT='no' # provide openvpn config file, certificates
# and keys in config/etc/openvpn folder
OPENVPN_WEBGUI='yes' # install a web gui to
start/stop/control openvpn
OPENVPN_N='14' # number of openvpn configurations
#
# Add these information to ovpn files generated with ovpn-convert-conf
# utility. Speeds up creating lots of 'reverse' matching ovpn config
# files
#
#OPT_OPENVPN_CONVERT_CONF='no'
#OPENVPN_CONVERT_CONF_ROUTE_N='1'
#OPENVPN_CONVERT_CONF_ROUTE_1='192.168.6.0/24'
#OPENVPN_CONVERT_CONF_CON_N='1'
#OPENVPN_CONVERT_CONF_CON_1_HOST='dyndns.example.com'
#OPENVPN_CONVERT_CONF_CON_1_FLOAT='yes'
#
OPENVPN_1_CREATE_SECRET='no'
OPENVPN_1_NAME='bbit01'
OPENVPN_1_REMOTE_HOST='xx.xxx.252.94'
OPENVPN_1_REMOTE_PORT='30330'
OPENVPN_1_LOCAL_PORT='30331'
OPENVPN_1_OPEN_OVPNPORT='yes'
OPENVPN_1_SECRET='gxxxxxe.secret'
OPENVPN_1_TYPE='tunnel'
OPENVPN_1_REMOTE_VPN_IP='192.168.151.21'
OPENVPN_1_LOCAL_VPN_IP='192.168.151.22'
OPENVPN_1_ROUTE_N='1'
OPENVPN_1_ROUTE_1='192.168.140.0/24'
OPENVPN_1_PF_INPUT_N='1'
OPENVPN_1_PF_INPUT_1='ACCEPT'
OPENVPN_1_PF_FORWARD_N='1'
OPENVPN_1_PF_FORWARD_1='ACCEPT BIDIRECTIONAL'
OPENVPN_1_PROTOCOL='udp4'
OPENVPN_1_CIPHER='BF-CBC'
OPENVPN_1_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_1_MUTE_REPLAY_WARNINGS='yes'
#-------------------------------------------------------------------------------
OPENVPN_2_CREATE_SECRET='no' #No
OPENVPN_2_NAME='bbitws03' #Name
OPENVPN_2_REMOTE_VPN_IP='10.0.0.18' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_2_LOCAL_VPN_IP='10.0.0.17' #Locale IP der Tunnels am Fli4l
OPENVPN_2_LOCAL_PORT='19999' #Localer port darf noch nicht
verwendet werden
#
OPENVPN_2_OPEN_OVPNPORT='yes' #yes
OPENVPN_2_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_2_TYPE='tunnel' #Art der verbindung
OPENVPN_2_ROUTE_N='0' #keine route notwendig
OPENVPN_2_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_2_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_2_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_2_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_2_PROTOCOL='udp4'
OPENVPN_2_CIPHER='BF-CBC'
OPENVPN_2_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_2_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_3_CREATE_SECRET='no' #No
OPENVPN_3_NAME='bbitws82' #Name
OPENVPN_3_LOCAL_PORT='18881' #Localer port darf noch nicht
verwendet werden
OPENVPN_3_REMOTE_VPN_IP='10.0.0.22' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_3_LOCAL_VPN_IP='10.0.0.21' #Locale IP der Tunnels am Fli4l
#
OPENVPN_3_OPEN_OVPNPORT='yes' #yes
OPENVPN_3_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_3_TYPE='tunnel' #Art der verbindung
OPENVPN_3_ROUTE_N='0' #keine route notwendig
#OPENVPN_3_PF_INPUT_N='1' #firewall zugriff des portes
#OPENVPN_3_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_3_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_3_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_3_PROTOCOL='udp4'
OPENVPN_3_CIPHER='BF-CBC'
OPENVPN_3_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_3_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_4_CREATE_SECRET='no' #No
OPENVPN_4_NAME='bbitws04' #Name
OPENVPN_4_LOCAL_PORT='18883' #Localer port darf noch nicht
verwendet werden
OPENVPN_4_REMOTE_VPN_IP='10.0.0.26' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_4_LOCAL_VPN_IP='10.0.0.25' #Locale IP der Tunnels am Fli4l
#
OPENVPN_4_OPEN_OVPNPORT='yes' #yes
OPENVPN_4_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_4_TYPE='tunnel' #Art der verbindung
OPENVPN_4_ROUTE_N='0' #keine route notwendig
OPENVPN_4_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_4_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_4_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_4_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_4_PROTOCOL='udp4'
OPENVPN_4_CIPHER='BF-CBC'
OPENVPN_4_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_4_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_5_CREATE_SECRET='no' #No
OPENVPN_5_NAME='bbitws08' #Name
OPENVPN_5_LOCAL_PORT='18885' #Localer port darf noch nicht
verwendet werden
OPENVPN_5_REMOTE_VPN_IP='10.0.0.30' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_5_LOCAL_VPN_IP='10.0.0.29' #Locale IP der Tunnels am Fli4l
#
OPENVPN_5_OPEN_OVPNPORT='yes' #yes
OPENVPN_5_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_5_TYPE='tunnel' #Art der verbindung
OPENVPN_5_ROUTE_N='0' #keine route notwendig
OPENVPN_5_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_5_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_5_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_5_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_5_PROTOCOL='udp4'
OPENVPN_5_CIPHER='BF-CBC'
OPENVPN_5_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_5_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_6_CREATE_SECRET='no' #No
OPENVPN_6_NAME='bbitws05' #Name
OPENVPN_6_LOCAL_PORT='18887' #Localer port darf noch nicht
verwendet werden
OPENVPN_6_REMOTE_VPN_IP='10.0.0.34' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_6_LOCAL_VPN_IP='10.0.0.33' #Locale IP der Tunnels am Fli4l
#
OPENVPN_6_OPEN_OVPNPORT='yes' #yes
OPENVPN_6_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_6_TYPE='tunnel' #Art der verbindung
OPENVPN_6_ROUTE_N='0' #keine route notwendig
OPENVPN_6_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_6_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_6_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_6_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_6_PROTOCOL='udp4'
OPENVPN_6_CIPHER='BF-CBC'
OPENVPN_6_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_6_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_7_CREATE_SECRET='no' #No
OPENVPN_7_NAME='bbitws09' #Name
OPENVPN_7_LOCAL_PORT='18889' #Localer port darf noch nicht
verwendet werden
OPENVPN_7_REMOTE_VPN_IP='10.0.0.38' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_7_LOCAL_VPN_IP='10.0.0.37' #Locale IP der Tunnels am Fli4l
#
OPENVPN_7_OPEN_OVPNPORT='yes' #yes
OPENVPN_7_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_7_TYPE='tunnel' #Art der verbindung
OPENVPN_7_ROUTE_N='0' #keine route notwendig
OPENVPN_7_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_7_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_7_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_7_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_7_PROTOCOL='udp4'
OPENVPN_7_CIPHER='BF-CBC'
OPENVPN_7_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_7_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_8_CREATE_SECRET='no' #No
OPENVPN_8_NAME='bbitws54' #Name
OPENVPN_8_LOCAL_PORT='18891' #Localer port darf noch nicht
verwendet werden
OPENVPN_8_REMOTE_VPN_IP='10.0.0.42' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_8_LOCAL_VPN_IP='10.0.0.41' #Locale IP der Tunnels am Fli4l
#
OPENVPN_8_OPEN_OVPNPORT='yes' #yes
OPENVPN_8_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_8_TYPE='tunnel' #Art der verbindung
OPENVPN_8_ROUTE_N='0' #keine route notwendig
OPENVPN_8_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_8_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_8_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_8_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_8_PROTOCOL='udp4'
OPENVPN_8_CIPHER='BF-CBC'
OPENVPN_8_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_8_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_9_CREATE_SECRET='no' #No
OPENVPN_9_NAME='bbitws02' #Name
OPENVPN_9_LOCAL_PORT='18893' #Localer port darf noch nicht
verwendet werden
OPENVPN_9_REMOTE_VPN_IP='10.0.0.46' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_9_LOCAL_VPN_IP='10.0.0.45' #Locale IP der Tunnels am Fli4l
#
OPENVPN_9_OPEN_OVPNPORT='yes' #yes
OPENVPN_9_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_9_TYPE='tunnel' #Art der verbindung
OPENVPN_9_ROUTE_N='0' #keine route notwendig
OPENVPN_9_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_9_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_9_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_9_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_9_PROTOCOL='udp4'
OPENVPN_9_CIPHER='BF-CBC'
OPENVPN_9_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_9_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_10_CREATE_SECRET='no' #No
OPENVPN_10_NAME='bbitws06' #Name
OPENVPN_10_LOCAL_PORT='18895' #Localer port darf noch nicht
verwendet werden
OPENVPN_10_REMOTE_VPN_IP='10.0.0.50' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_10_LOCAL_VPN_IP='10.0.0.49' #Locale IP der Tunnels am Fli4l
#
OPENVPN_10_OPEN_OVPNPORT='yes' #yes
OPENVPN_10_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_10_TYPE='tunnel' #Art der verbindung
OPENVPN_10_ROUTE_N='0' #keine route notwendig
OPENVPN_10_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_10_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_10_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_10_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_10_PROTOCOL='udp4'
OPENVPN_10_CIPHER='BF-CBC'
OPENVPN_10_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_10_MUTE_REPLAY_WARNINGS='yes'
#-------------------------------------------------------------------------------
OPENVPN_11_CREATE_SECRET='no' #No
OPENVPN_11_NAME='bbitws01' #Name
OPENVPN_11_LOCAL_PORT='18897' #Localer port darf noch nicht
verwendet werden
OPENVPN_11_REMOTE_VPN_IP='10.0.0.54' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_11_LOCAL_VPN_IP='10.0.0.53' #Locale IP der Tunnels am Fli4l
#
OPENVPN_11_OPEN_OVPNPORT='yes' #yes
OPENVPN_11_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_11_TYPE='tunnel' #Art der verbindung
OPENVPN_11_ROUTE_N='0' #keine route notwendig
OPENVPN_11_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_11_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_11_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_11_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_11_PROTOCOL='udp4'
OPENVPN_11_CIPHER='BF-CBC'
OPENVPN_11_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_11_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_12_CREATE_SECRET='no' #No
OPENVPN_12_NAME='bbitws87' #Name
OPENVPN_12_LOCAL_PORT='18899' #Localer port darf noch nicht
verwendet werden
OPENVPN_12_REMOTE_VPN_IP='10.0.0.58' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_12_LOCAL_VPN_IP='10.0.0.57' #Locale IP der Tunnels am Fli4l
#
OPENVPN_12_OPEN_OVPNPORT='yes' #yes
OPENVPN_12_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_12_TYPE='tunnel' #Art der verbindung
OPENVPN_12_ROUTE_N='0' #keine route notwendig
OPENVPN_12_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_12_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_12_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_12_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_12_PROTOCOL='udp4'
OPENVPN_12_CIPHER='BF-CBC'
OPENVPN_12_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_12_MUTE_REPLAY_WARNINGS='yes'
#Protokoll über UDP
#-------------------------------------------------------------------------------
OPENVPN_13_CREATE_SECRET='no' #No
OPENVPN_13_NAME='bbit-kassa' #Name
OPENVPN_13_LOCAL_PORT='18901' #Localer port darf noch nicht
verwendet werden
OPENVPN_13_REMOTE_VPN_IP='10.0.0.62' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_13_LOCAL_VPN_IP='10.0.0.61' #Locale IP der Tunnels am Fli4l
#
OPENVPN_13_OPEN_OVPNPORT='yes' #yes
OPENVPN_13_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_13_TYPE='tunnel' #Art der verbindung
OPENVPN_13_ROUTE_N='0' #keine route notwendig
OPENVPN_13_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_13_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_13_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_13_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_13_PROTOCOL='udp4'
OPENVPN_13_CIPHER='BF-CBC'
OPENVPN_13_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_13_MUTE_REPLAY_WARNINGS='yes'
#-------------------------------------------------------------------------------
OPENVPN_14_CREATE_SECRET='no' #No
OPENVPN_14_NAME='bbitws07' #Name
OPENVPN_14_LOCAL_PORT='18903' #Localer port darf noch nicht
verwendet werden
OPENVPN_14_REMOTE_VPN_IP='10.0.0.66' #Remote Ip die den client
zugewiesen wird darf noch nicht verwendet werden
OPENVPN_14_LOCAL_VPN_IP='10.0.0.65' #Locale IP der Tunnels am Fli4l
#
OPENVPN_14_OPEN_OVPNPORT='yes' #yes
OPENVPN_14_SECRET='gxxxxxe.secret' #Schlüsseldatei
OPENVPN_14_TYPE='tunnel' #Art der verbindung
OPENVPN_14_ROUTE_N='0' #keine route notwendig
OPENVPN_14_PF_INPUT_N='1' #firewall zugriff des portes
OPENVPN_14_PF_INPUT_1='ACCEPT' #firewall zugriff des portes
OPENVPN_14_PF_FORWARD_N='1' #firewall zugriff des portes
OPENVPN_14_PF_FORWARD_1='ACCEPT BIDIRECTIONAL' #firewall zugriff
des portes
OPENVPN_14_PROTOCOL='udp4'
OPENVPN_14_CIPHER='BF-CBC'
OPENVPN_14_DIGEST='SHA1' #Protokoll über UDP
OPENVPN_14_MUTE_REPLAY_WARNINGS='yes'
#-------------------------------------------------------------------------------
Mehr Informationen über die Mailingliste Fli4l_dev