[Fli4l_dev] Suche Infos / Netzwerktreiber zur APU.4D2

[Friedhold Schuster]

Hallo Helmut,
Danke für Deine Mühe.

Ich habe es mal eingefügt.

Am 25.04.2020 um 18:44 schrieb Helmut Backhaus:
> Das Beispiel ist in der Doku nicht mehr drin (zumindest finde ich es nicht).
> 
> So habe ich es gemacht:
> OPT_BRIDGE_DEV='yes'    # activate Bridging 802.1D
> BRIDGE_DEV_N='1'
> BRIDGE_DEV_1_NAME='br'
> BRIDGE_DEV_1_DEVNAME='br0'
> BRIDGE_DEV_1_DEV_N='2'
> BRIDGE_DEV_1_DEV_1_DEV='eth0'
> BRIDGE_DEV_1_DEV_2_DEV='wlan0'
> 
> Ich habe das so in der V3 aber die Parameter sollten die gleichen sein ...

Nun bekommt mein Rechner keine IP mehr..
Über den seriellen Port kann ich zugreifen, aber es scheint keine Fehler 
anzuzeigen.

Ist der ad-hoc Modus richtig? Mich wundert, das ich kein WLAN sehen 
kann, also die SSID ist nicht zu sehen.

Was kann ich posten?

hier mal einiges (sory, wenn es zuviel ist):

#
# package 'hwsupp'
#
HWSUPP_BOOT_LED='0'
HWSUPP_BUTTON_N='0'
HWSUPP_CPUFREQ='no'
HWSUPP_DRIVER_N='0'
HWSUPP_I2C_N='0'
HWSUPP_LED_1='ready'
HWSUPP_LED_1_DEVICE='apu::1'
HWSUPP_LED_N='1'
HWSUPP_TYPE='pcengines-apu'
HWSUPP_WATCHDOG='yes'
OPT_HWSUPP='yes'
OPT_VPN_CARD='no'

#
# package '<internal>'
#
KERNEL_MAJOR='5.4'

#
# package 'advanced_networking'
#
BRIDGE_DEV_1_DEV_1_DEV='eth2'
BRIDGE_DEV_1_DEV_2_DEV='wlan0'
BRIDGE_DEV_1_DEV_N='2'
BRIDGE_DEV_1_DEVNAME='br0'
BRIDGE_DEV_1_NAME='br'
BRIDGE_DEV_N='1'
DEV_MTU_N='0'
OPT_BCRELAY='no'
OPT_BONDING_DEV='no'
OPT_BRIDGE_DEV='yes'
OPT_EBTABLES='no'
OPT_ETHTOOL='no'
OPT_IPSET='no'
OPT_SWITCH='no'
OPT_VLAN_DEV='no'

#
# package 'base'
#
ARCH='x86'
BEEP='yes'
BOOT_TYPE='hd'
BOOTMENU_TIME='20'
BUG_CHECK='yes'
COMP_TYPE_OPT='lzma'
COMP_TYPE_ROOTFS='xz'
CONSOLE_BLANK_TIME='0'
DEBUG_STARTUP='no'
DNS_FORWARDERS='8.8.8.8'
DOMAIN_NAME='lan.home'
FLI4L_BUILDDATE='2020-04-26'
FLI4L_BUILDDIR='xx'
FLI4L_BUILDTIME='08:52:14'
FLI4L_VERSION='4.0.0-r58373-testing'
HOSTNAME='fli4lhome'
HOSTNAME_ALIAS_N='0'
IP_CONNTRACK_MAX=''
IP_NET_1='{Gigacube-v4}'
IP_NET_2='{O2-v4}'
IP_NET_3='192.168.1.1/24'
IP_NET_1_DEV='eth0'
IP_NET_2_DEV='eth1'
IP_NET_3_DEV='eth2'
IP_NET_N='3'
IP_ROUTE_N='0'
KERNEL_BOOT_OPTION='nokbd reboot=bios'
KERNEL_VERSION='5.4.29'
KEYBOARD_LOCALE='auto'
LIBATA_DMA='enabled'
LOCALE='de'
LOG_BOOT_SEQ='yes'
LOGIP_LOGDIR='auto'
LUA_VERSION='5.3'
MASQ_MODULE_N='0'
MOUNT_BOOT='rw'
NET_DRV_1='igb'
NET_DRV_2='ath9k'
NET_DRV_1_OPTION=''
NET_DRV_2_OPTION=''
NET_DRV_N='2'
OPT_ADDMODULES='no'
OPT_BASE='yes'
OPT_HOTPLUG_PCI='no'
OPT_IPV4='yes'
OPT_IPV6='no'
OPT_KLOGD='yes'
OPT_LOGIP='yes'
OPT_LUA='no'
OPT_MAKEKBL='no'
OPT_NET_PREFIX='no'
OPT_PNP='no'
OPT_SYSLOGD='yes'
OPT_Y2K='no'
PASSWORD='xx'
PF_FORWARD_1='tmpl:samba DROP'
PF_FORWARD_2='IP_NET_3 ACCEPT BIDIRECTIONAL'
PF_FORWARD_ACCEPT_DEF='yes'
PF_FORWARD_LOG='no'
PF_FORWARD_LOG_LIMIT='3/minute:5'
PF_FORWARD_N='2'
PF_FORWARD_POLICY='REJECT'
PF_FORWARD_REJ_LIMIT='1/second:5'
PF_FORWARD_UDP_REJ_LIMIT='1/second:5'
PF_INPUT_1='IP_NET_3 ACCEPT'
PF_INPUT_2='tmpl:samba DROP NOLOG'
PF_INPUT_ACCEPT_DEF='yes'
PF_INPUT_ICMP_ECHO_REQ_SIZE='150'
PF_INPUT_LOG='no'
PF_INPUT_LOG_LIMIT='3/minute:5'
PF_INPUT_N='2'
PF_INPUT_POLICY='REJECT'
PF_INPUT_REJ_LIMIT='1/second:5'
PF_INPUT_UDP_REJ_LIMIT='1/second:5'
PF_OUTPUT_ACCEPT_DEF='yes'
PF_OUTPUT_CT_ACCEPT_DEF='yes'
PF_OUTPUT_CT_N='0'
PF_OUTPUT_LOG='no'
PF_OUTPUT_LOG_LIMIT='3/minute:5'
PF_OUTPUT_N='0'
PF_OUTPUT_POLICY='ACCEPT'
PF_OUTPUT_REJ_LIMIT='1/second:5'
PF_OUTPUT_UDP_REJ_LIMIT='1/second:5'
PF_POSTROUTING_1='IP_NET_3 MASQUERADE'
PF_POSTROUTING_N='1'
PF_PREROUTING_CT_ACCEPT_DEF='yes'
PF_PREROUTING_CT_N='0'
PF_PREROUTING_N='0'
PF_USR_CHAIN_N='0'
PORTFW_N='0'
POWERMANAGEMENT='acpi'
RTC_SYNC='kernel'
SER_CONSOLE='yes'
SER_CONSOLE_IF='0'
SER_CONSOLE_RATE='38400'
SYSLOGD_DEST_1='*.* /dev/console'
SYSLOGD_DEST_2='kern.info /var/log/dial.log'
SYSLOGD_DEST_N='2'
SYSLOGD_RECEIVER='yes'
SYSLOGD_ROTATE='yes'
SYSLOGD_ROTATE_AT_SHUTDOWN='yes'
SYSLOGD_ROTATE_DIR='/data/syslog'
SYSLOGD_ROTATE_MAX='5'
TIME_INFO='MEZ-1MESZ,M3.5.0,M10.5.0/3'

#
# package 'kernel_5_4'
#
COMP_TYPE_ROOTFS_V54='xz'
ISDN_N='0'
USB_EXTRA_DRIVER_N='0'


# package 'wlan'
#
OPT_WLAN='yes'
WLAN_1_ACL_MAC_N='0'
WLAN_1_ACL_POLICY='allow'
WLAN_1_CHANNEL='1'
WLAN_1_ENC_N='0'
WLAN_1_ESSID='id'
WLAN_1_MAC='04:F0:21:86:52:6C'
WLAN_1_MODE='ad-hoc'
WLAN_1_RATE='auto'
WLAN_1_WPA_ENCRYPTION='TKIP'
WLAN_1_WPA_KEY_MGMT=''
WLAN_1_WPA_PSK='23isg7456zea'
WLAN_1_WPA_TYPE='1'
WLAN_1_WPS='no'
WLAN_N='1'
WLAN_REGDOMAIN='DE'
WLAN_WEBGUI='yes'

#
# package 'dns_dhcp'
#
CIRC_1_DHCP_DEV='IP_NET_1_DEV'
CIRC_2_DHCP_DEV='IP_NET_2_DEV'
DHCP_DENY_MAC_N='0'
DHCP_EXTRA_RANGE_N='0'
DHCP_LEASES_DIR='auto'
DHCP_LS_TIME_DYN='3600'
DHCP_LS_TIME_FIX='86400'
DHCP_MAX_LS_TIME_DYN='7200'
DHCP_MAX_LS_TIME_FIX='604800'
DHCP_OPTION_WPAD='no'
DHCP_RANGE_1_DNS_SERVERS='192.168.1.1'
DHCP_RANGE_1_END='192.168.1.249'
DHCP_RANGE_1_NET='IP_NET_3'
DHCP_RANGE_1_OPTION_N='0'
DHCP_RANGE_1_START='192.168.1.200'
DHCP_RANGE_N='1'
DHCP_SERVER_LEASES_DIR='auto'
DHCP_TYPE='dnsmasq'
DHCP_VERBOSE='no'


#
# package 'dns_dhcp'
#
CIRC_1_DHCP_DEV='IP_NET_1_DEV'
CIRC_2_DHCP_DEV='IP_NET_2_DEV'
DHCP_DENY_MAC_N='0'
DHCP_EXTRA_RANGE_N='0'
DHCP_LEASES_DIR='auto'
DHCP_LS_TIME_DYN='3600'
DHCP_LS_TIME_FIX='86400'
DHCP_MAX_LS_TIME_DYN='7200'
DHCP_MAX_LS_TIME_FIX='604800'
DHCP_OPTION_WPAD='no'
DHCP_RANGE_1_DNS_SERVERS='192.168.1.1'
DHCP_RANGE_1_END='192.168.1.249'
DHCP_RANGE_1_NET='IP_NET_3'
DHCP_RANGE_1_OPTION_N='0'
DHCP_RANGE_1_START='192.168.1.200'
DHCP_RANGE_N='1'
DHCP_SERVER_LEASES_DIR='auto'
DHCP_TYPE='dnsmasq'
DHCP_VERBOSE='no'



Dankeschön und schönen Sonntag