[Fli4l_dev] bootzeit

[Holger Bruenjes]

Hallo Peter

Am 2018-07-31 um 17:49 schrieb Peter Schiefer:

> ich hab da gerade eine Idee :)
>  
>>> Geht denn die Lan-Verbindung überhaupt?
>>> (Wenn auch nicht geroutet wird)
>>
>> Wenn der Verbindungsversuch abgelehnt wird, ist mal Grundsaetzlich
>> einer vorhanden der ablehnt, dass verwirrt mich etwas.
> 
> hast Du den im Paketfilter für das interne Netzt (vermutlich IP_NET_1 im
> INPUT Bereich den Zugriff erlaubt?

hmm ja, aber was hat das mit ssh zu tun?

aber im default ist das '#'

#PF_INPUT[]='IP_NET_1 ACCEPT'

das heisst doch, es ist optional


gut, mal auf ein neues

mount /dev/sdb1 /mnt

 chmod 777 /dev/sdb1


./mkfli4l.sh --hdinstallpath /mnt

fli4l 4.0.0-r53236-testing - starting build process
==============================================================================

using configuration from directory 'config'...

--- read and check the build-environment from
config/mkfli4l.txt...-----------
------------------------------------------------------------------------------

--- check configuration in directory "config" and create archives
------------
------------------------------------------------------------------------------

--- extracting some information from build/image/rc.cfg
----------------------
  ARCH='x86'
  KERNEL_VERSION='4.4.144'
  COMP_TYPE_ROOTFS='xz'
  COMP_TYPE_OPT='xz'
  HOSTNAME='fli4l'
  OPT_RECOVER='no'
------------------------------------------------------------------------------

--- generating md5
sums-------------------------------------------------------
FLI4L_MD5_RC_CFG='af8c26ac6db503cc3102f17d97ec55c4'
FLI4L_MD5_KERNEL='4ce9ca3b4575d03e27c9b77832adfa4e'
FLI4L_MD5_ROOTFS_IMG='89f92d7b21d3acaaea40c83dd83aa3f0'
FLI4L_MD5_SYSLINUX_CFG='1bfdbe7b9b66dcfbc419895bb1d9a4d7'
------------------------------------------------------------------------------

creation of all build-files finished...

--- trying to copy files to install
medium------------------------------------
   rc.cfg [OK]
   kernel [OK]
   rootfs.img [OK]
   syslinux.cfg [OK]
------------------------------------------------------------------------------

--- installing boot loader on
/dev/sdb----------------------------------------
If you really know what you're doing type YES
YES
1+0 records in
1+0 records out
440 bytes copied, 0.00155677 s, 283 kB/s

Welcome to fdisk (util-linux 2.31.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.


Command (m for help): Selected partition 1
The bootable flag on partition 1 is disabled now.

-->>    Command (m for help): 1: unknown command

Command (m for help):
The partition table has been altered.
Syncing disks.

------------------------------------------------------------------------------


Do not forget to 'umount /mnt' before removing the medium

Insert "disk" into your router and start.
Good luck.

[.........
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xb6cd117e

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1        2048 15904223 15902176  7.6G  b W95 FAT32

bootflag is wech

also neu


Command (m for help): a
Selected partition 1
The bootable flag on partition 1 is enabled now.

Command (m for help): w
The partition table has been altered.
Syncing disks.

Disklabel type: dos
Disk identifier: 0xb6cd117e

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048 15904223 15902176  7.6G  b W95 FAT32


syslinux -i /dev/sdb1

umount /mnt

----------------------

hmm, nach diesem neuen Anlauf scheint es zu klappen

Welcome to fli4l !



There are some warnings or error messages in /bootmsg.txt!

Enter cat /bootmsg.txt to see the content.


fli4l 4.0.0-r53236-testing # cat /bootmsg.txt

[rc099.persistent] WARN: Could not find a suitable directory for
persistent sto!
[rc099.persistent] WARN: All persistent settings will be gone after
the next re!
[rc099.persistent] WARN: Please create a directory named  on some
medium mounte!


Wenn diese Mail jetzt so rausgeht geht es wohl ;-)


Holger