[Fli4l_dev] Telekom Dualstak Zugang und IPv6

[Roland Franke]

Hallo,

>> >  Hier wird das Netz IPV6_NET_1 "angepasst", weil ein Präfix
>> > über den
>> >  DHCPv6-Circuit erhalten wurde. Ich vermute, dass solche Zeilen
>> > bei dir
>> >  fehlen?
>>
>> stimmt. Kann ich nicht finden.
>> Doch warum?? Was brauchst du eventuell sonst noch an Info?

> 1) Kommt die allererste Meldung ("setting up IPv6 networks...")?
Bei der rc305.ipv6-eth ja.
> 2) Kommen überhaupt prefixv6-up-Meldungen? Bei mir lautet die komplette
> Ausgabe z.B.:
Nachdem ich mal das Syslog komplett wegschreiben lasse, habe ich da die
Einträge gefunden :-)

> Kommt davon irgendetwas?
Ja kommt. Syslog kannst du per PN bekommen wenn nötig.

> 3) Siehst du überhaupt irgendwo Syslog-Meldungen vom DHCPv6-Client? Bei
> mir kommt (in daemon.log) z.B. folgendes:

Ich bekomme:
fli4l local2.notice circ2:d[10585]: Generating RENEW for 0 IA(s) and 1 
PD(s).
fli4l daemon.info Dibbler-circ2[10610]: Generating RENEW for 0 IA(s) and 1 
PD(s).
fli4l local2.notice circ2:d[10585]: Sending RENEW(opts:1 2 25 8 ) on ppp1/8 
to multicast.
fli4l daemon.debug Dibbler-circ2[10610]: Sending RENEW(opts:1 2 25 8 ) on 
ppp1/8 to multicast.
fli4l local2.notice circ2:d[10585]: Sleeping for 10 second(s).
fli4l daemon.debug Dibbler-circ2[10610]: Sleeping for 10 second(s).
fli4l daemon.debug Dibbler-circ2[10610]: Received 97 bytes on interface 
ppp1/8 (socket=6, addr=fe80::107:107:3e9b:f257).
fli4l daemon.info Dibbler-circ2[10610]: Received REPLY on 
ppp1/8,trans-id=0xa3624a, 3 opts: 1 2 25
fli4l daemon.notice Dibbler-circ2[10610]: PD: Updating prefix 
2003:d8:23da:9000::/56 to all interfaces (prefix will be split to /64 
prefixes if necessary).
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface ppp1/8 is the 
interface, where prefix has been obtained, skipping.
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface imq1/7 is not 
multicast capable, ignoring.
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface imq0/6 is not 
multicast capable, ignoring.
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface ippp1/5 is down, 
ignoring.
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface ippp0/4 is down, 
ignoring.
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface eth1/3 has no 
link-local address, ignoring. (Disconnected? Not associated? No-link?)
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface eth0/2 is suitable 
for PD.
fli4l daemon.debug Dibbler-circ2[10610]: PD: Interface lo/1 is not multicast 
capable, ignoring.
fli4l local2.notice circ2:d[10585]: Received 97 bytes on interface ppp1/8 
(socket=6, addr=fe80::107:107:3e9b:f257).
fli4l local2.notice circ2:d[10585]: Received REPLY on 
ppp1/8,trans-id=0xa3624a, 3 opts: 1 2 25
fli4l local2.notice circ2:d[10585]: PD: Updating prefix 
2003:d8:23da:9000::/56 to all interfaces (prefix will be split to /64 
prefixes if necessary).
fli4l local2.notice circ2:d[10585]: PD: Interface ppp1/8 is the interface, 
where prefix has been obtained, skipping.
fli4l local2.notice circ2:d[10585]: PD: Interface imq1/7 is not multicast 
capable, ignoring.
fli4l local2.notice circ2:d[10585]: PD: Interface imq0/6 is not multicast 
capable, ignoring.
fli4l local2.notice circ2:d[10585]: PD: Interface ippp1/5 is down, ignoring.
fli4l local2.notice circ2:d[10585]: PD: Interface ippp0/4 is down, ignoring.
fli4l local2.notice circ2:d[10585]: PD: Interface eth1/3 has no link-local 
address, ignoring. (Disconnected? Not associated? No-link?)
fli4l local2.notice circ2:d[10585]: PD: Interface eth0/2 is suitable for PD.
fli4l local2.notice circ2:d[10585]: PD: Interface lo/1 is not multicast 
capable, ignoring.
fli4l local2.notice circ2:d[10585]: PD: Using 1 suitable interface(s):eth0
fli4l daemon.info Dibbler-circ2[10610]: PD: Using 1 suitable 
interface(s):eth0
fli4l daemon.notice Dibbler-circ2[10610]: PD: Updating prefix 
2003:d8:23da:9000::/56 on the eth0/2 interface.
fli4l local2.notice circ2:d[10585]: PD: Updating prefix 
2003:d8:23da:9000::/56 on the eth0/2 interface.
fli4l daemon.debug Dibbler-circ2[10610]: RENEW(IA_PD) will be sent (T1) 
after 900, REBIND (T2) after 1440 seconds.
fli4l local2.notice circ2:d[10585]: RENEW(IA_PD) will be sent (T1) after 
900, REBIND (T2) after 1440 seconds.
fli4l daemon.debug Dibbler-circ2[10610]: About to execute 
/var/lib/dibbler/circ2/dibbler-notify-circ2.sh script, 21 variables.
fli4l local2.notice circ2:d[10585]: About to execute 
/var/lib/dibbler/circ2/dibbler-notify-circ2.sh script, 21 variables.
fli4l daemon.debug Dibbler-circ2[10610]: Script execution complete, return 
code=0
fli4l daemon.debug Dibbler-circ2[10610]: Sleeping for 900 second(s).
fli4l local2.notice circ2:d[10585]: Script execution complete, return code=0
fli4l local2.notice circ2:d[10585]: Sleeping for 900 second(s).
fli4l local2.notice prefixv6-up[26171]: circ2[ppp1]: IPv6 prefix 
2003:d8:23da:9000::/56 has been renewed
fli4l local2.notice prefixv6-up[26171]: executing 
/etc/ppp/prefixv6-up030.nets
fli4l local2.notice prefixv6-up[26171]: setting up IPv6 networks...
fli4l local2.notice prefixv6-up[26171]:    ipv6-interface-setup.sh: 
IPV6_NET_1: advertising prefix 2003:d8:23da:9001::/64 on eth0 for 14400/1800 
seconds
fli4l local3.info /usr/local/bin/mom_netlink: delivering new_addr_net_event 
addr_net_event_address=2003:d8:23da:9001::1 addr_net_event_scope=0 
addr_net_event_prefixlen=64 bound_net_event_index=2 net_event_family=10
fli4l local2.notice prefixv6-up[26171]:    ipv6-interface-setup.sh: 
IPV6_NET_1: address 2003:d8:23da:9001::1/64 added to eth0 for 14400/1800 
seconds
fli4l daemon.info radvd[15816]: attempting to reread config file
fli4l daemon.info radvd[15816]: resuming normal operation
fli4l local0.info dnsmasq[20246]: read /etc/hosts - 8 addresses
fli4l local0.info dnsmasq[20246]: read /etc/hosts.d/hosts.dhcp - 0 addresses
fli4l local0.info dnsmasq[20246]: read /etc/hosts.d/hosts.global - 0 
addresses
fli4l local0.info dnsmasq[20246]: read /etc/hosts.d/hosts.dns - 88 addresses
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
113.0.203.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
100.51.198.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
2.0.192.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
0.0.192.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
254.169.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
127.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
31.172.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using local addresses only for domain 
30.172.in-addr.arpa
fli4l local0.info dnsmasq[20246]: using nameserver 217.0.43.161#53
fli4l local0.info dnsmasq[20246]: using nameserver 217.0.43.177#53
fli4l local0.info dnsmasq[20246]: using 17 more local addresses
fli4l local2.notice prefixv6-up[26171]: executing 
/etc/ppp/prefixv6-up050.circuits-net
fli4l local2.notice prefixv6-up[26171]: executing 
/etc/ppp/prefixv6-up300.logip
...

> 4) Wird dein Präfix ins WAN-IPv6-Protokoll geschrieben?
Ja da bekomme ich alle paar Minuten einen neuen Eintrag.
IP-Adreese 2003:d8_23d9.......
Circuit ist auch auf Status Online.

Gruß Roland