[Fli4l_dev] Informationen zu den wöchentlichen 4.0-Archiven vom 24.03.2017 (r47533)

[B. Sprenger]

Hallo zusammen,
erst mal vielen Dank für die Antworten.

Am 27.03.2017 um 21:54 schrieb Peter Schiefer:
>
>>>> was sagt das Log? nicht aktiviert ---> aktivieren
>>> Wie wird das Log aktiviert und wo finde ich später die Logdatei?
>>
>> naja ein Blick in die Doku hilft:
>>
>> IGMPPROXY_DEBUG
>>
>> Mit 'yes' können Meldungen des IGMP Proxies ins syslog ausgegeben werden.
>>
>> IGMPPROXY_DEBUG2
>>
>> Mit 'yes' kann das Loglevel des IGMP Proxies erhöht werden.
>>
>> geloggt wird denke ich in /var/log/
"denke ich"...
Ich wollte es etwas genauer wissen.
Aber es wird tatsächlich in SYSLOG gelogged.
(Ich dachte es gibt eine separate Logdatei)


 >>> was passiert wenn du den IGMP Proxy von Hand startest wenn der fli4l
 >>> gebootet hat?
 >> Wie wird der IGMP von Hand gestartet?
 >auf der Konsole:
 >igmpproxy -v -v /etc/igmpproxy.conf

Nach der Eingabe passiert nichts.
Es erscheint wieder der Kommandoprompt.
Ob es einen Einfluss auf die Funktion hat, kann ich erst heute Abend 
überprüfen.

Nachfolgend Auszug aus dem SYSLOG.
Ich habe versucht nicht relevante Teile heraus zu löschen.
Aber ausser der letzten Meldung:
"igmpproxy[2442]: select() failure; Errno(14): Bad address"
kann ich nichts ungewöhnliches erkennen.



circd[1368]: 
handle_create_circuit_message(55#126:create_circuit_message): ACK, id=circ1
circd[1368]: 
handle_create_circuit_message(59#126:create_circuit_message): type=dhcp
circd[1368]: circd_start_queue[circ2]: started child circ2:q
circd[1368]: circd_change_state: circuit circ2 changes state from 
inactive to active
circd[1368]: 
handle_create_circuit_message(59#126:create_circuit_message): ACK, id=circ2

dnsmasq[14939]: using local addresses only for domain 113.0.203.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 
100.51.198.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 2.0.192.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 0.0.192.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 254.169.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 127.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 31.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 30.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 29.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 28.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 27.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 26.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 25.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 24.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 23.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 22.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 21.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 20.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 19.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 18.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 17.172.in-addr.arpa

dnsmasq-dhcp[14939]: DHCPDISCOVER(eth2) 00:80:f0:af:4e:19
dnsmasq-dhcp[14939]: DHCPOFFER(eth2) 172.30.0.15 00:80:f0:af:4e:19

circd[1368]: 
handle_set_global_dialmode_message(66#25188:set_global_dialmode_message): 
mode=auto
circd[1368]: 
handle_set_global_dialmode_message(66#25188:set_global_dialmode_message): 
effective dial mode changed for circuit circ1 from off to auto
circd[1368]: circd_circuit_autodialup: dialling up circ1
circd[1368]: circd_change_state: circuit circ1 changes state from active 
to ready
circd[1368]: 
handle_set_global_dialmode_message(66#25188:set_global_dialmode_message): 
effective dial mode changed for circuit circ2 from off to auto
circ1:q[10651]: 
handle_dialup_circuit_queue_message(71#circd:dialup_circuit_queue_message)
circd[1368]: circd_circuit_autodialup: dialling up circ2
circd[1368]: circd_change_state: circuit circ2 changes state from active 
to ready
circ2:q[11399]: 
handle_dialup_circuit_queue_message(75#circd:dialup_circuit_queue_message)
circ2:q[11399]: dhcp-dhcpcd-circuit-ctrl.sh[27110]: circ2: starting dhcpcd
dhcp-dhcpcd-circuit-ctrl.sh[27110]: circ2: starting dhcpcd
circd[1368]: 
handle_start_daemon_circuit_message(79#27110:start_daemon_circuit_message): 
id=circ2 daemon=dhcpcd daemon_args='-B' '-e' 'circ_id=circ2' '-c' 
'/etc/dhcpcd.sh' '-G' '-L' '-b' '--noipv6' '-o' 
'classless_static_routes,ms_classless_static_routes' 'eth1.8' cleanup_func=
circd[1368]: circd_daemon_wrapper[circ2]: started child circ2:d
circ2:d[27512]: starting dhcpcd -B -e circ_id=circ2 -c /etc/dhcpcd.sh -G 
-L -b --noipv6 -o classless_static_routes,ms_classless_static_routes 
eth1.8...
circ2:d[27512]: waiting for dhcpcd with PID 27532
dhcp-client: DHCP event 'PREINIT'
dhcp-client:     sleeping 0 seconds
dhcp-client: DHCP event 'NOCARRIER'
dhcpcd[27532]: eth1.8: waiting for carrier
dhcpcd[27532]: eth1.8: carrier acquired
/usr/local/bin/mom_netlink: delivering new_link_net_event 
link_net_event_broadcast=ff:ff:ff:ff:ff:ff 
link_net_event_address=00:40:63:da:cf:32 link_net_event_link=3 
link_net_event_mtu=1500 link_net_event_linkmode=0 
link_net_event_operstate=6 link_net_event_ifname=eth1.8 
link_net_event_flag_lower_up=1 link_net_event_flag_multicast=1 
link_net_event_flag_running=1 link_net_event_flag_broadcast=1 
link_net_event_flag_up=1 link_net_event_linktype=1 
bound_net_event_index=6 net_event_family=0
dhcp-client: DHCP event 'CARRIER'
dhcp-client:     ignoring dhcp event 'CARRIER'
dhcpcd[27532]: eth1.8: soliciting a DHCP lease
dhcpcd[27532]: eth1.8: offered 10.224.186.81 from 193.158.137.14 `DHSTG001'
dhcpcd[27532]: eth1.8: probing address 10.224.186.81/18
circd[1368]: 
handle_dialup_control_circuit_event(81#circ2:q:dialup_control_circuit_event): 
id=circ2 status_code=0
circd[1368]: 
handle_start_daemon_circuit_message(80#26443:start_daemon_circuit_message): 
id=circ1 daemon=pppd daemon_args='call' 'circuit.circ1.auto' cleanup_func=


dnsmasq[14939]: using local addresses only for domain 113.0.203.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 
100.51.198.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 2.0.192.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 0.0.192.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 254.169.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 127.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 31.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 30.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 29.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 28.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 27.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 26.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 25.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 24.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 23.172.in-addr.arpa
dnsmasq[14939]: using local addresses only for domain 22.172.in-addr.arpa

dhcpcd[27532]: eth1.8: leased 10.224.186.81 for 86400 seconds
dhcpcd[27532]: eth1.8: adding route to 10.224.128.0/18
dhcpcd[27532]: eth1.8: adding host route to 193.158.137.14 via 
10.224.191.254
dhcpcd[27532]: eth1.8: adding route to 87.141.128.0/17 via 10.224.191.254
dhcpcd[27532]: eth1.8: adding route to 217.237.157.0/24 via 10.224.191.254
dhcpcd[27532]: eth1.8: adding route to 217.237.158.0/24 via 10.224.191.254
dhcpcd[27532]: eth1.8: adding route to 217.239.36.0/24 via 10.224.191.254
dhcp-client: DHCP event 'BOUND'
dhcp-client: new_broadcast_address='10.224.191.255'
dhcp-client: new_classless_static_routes='193.158.137.14/32 
10.224.191.254 87.141.128.0/17 10.224.191.254 217.237.157.0/24 
10.224.191.254 217.237.158.0/24 10.224.191.254 217.239.36.0/24 
10.224.191.254'
dhcp-client: new_dhcp_lease_time='86400'
dhcp-client: new_dhcp_message_type='5'
dhcp-client: new_dhcp_rebinding_time='75600'
dhcp-client: new_dhcp_renewal_time='43200'
dhcp-client: new_dhcp_server_identifier='193.158.137.14'
dhcp-client: new_ip_address='10.224.186.81'
dhcp-client: new_network_number='10.224.128.0'
dhcp-client: new_server_name='DHSTG001'
dhcp-client: new_subnet_cidr='18'
dhcp-client: new_subnet_mask='255.255.192.0'
/usr/local/bin/mom_netlink: delivering new_rt_net_event 
rt_net_event_oif=8 rt_net_event_dst=217.0.119.41 rt_net_event_table=254 
rt_net_event_tos=0 rt_net_event_src_len=0 rt_net_event_dst_len=32 
rt_net_event_scope=253 rt_net_event_protocol=2 rt_net_event_routetype=1 
net_event_family=2
dhcp-client: Event: up, local: '10.224.186.81/18', remote: '10.224.191.254'
addr-up[31549]: circ2[eth1.8]: IPv4 address 10.224.186.81/18 has appeared
ip-up[31475]: executing ip-up scripts for circ2[eth1.8]
/usr/local/bin/mom_netlink: delivering new_rt_net_event 
rt_net_event_oif=8 rt_net_event_gateway=217.0.119.41 
rt_net_event_table=254 rt_net_event_tos=0 rt_net_event_src_len=0 
rt_net_event_dst_len=0 rt_net_event_scope=0 rt_net_event_protocol=3 
rt_net_event_routetype=1 net_event_family=2
ip-up[31475]: circuit circ2[eth1.8] comes up
ip-up[31475]: circ2: local IPv4 address: 10.224.186.81/18
ip-up[31475]: circ2: remote IPv4 address: 10.224.191.254

ip-up[31475]: executing /etc/ppp/ip-up050.conntrack
ip-up[31475]: executing /etc/ppp/ip-up200.dns
ip-up[31475]: Using peer DNS servers disabled for eth1.8

ip-up[31475]: finished ip-up scripts for circ2[eth1.8] (rc=0)
circd[1368]: 
handle_up_l3prot_circuit_event(101#31475:up_l3prot_circuit_event): 
id=circ2 l3prot=ipv4
circd[1368]: circd_change_state: circuit circ2 changes state from ready 
to online

igmpproxy[3198]: Searching for config file at '/etc/igmpproxy.conf'
igmpproxy[3198]: Config: Quick leave mode enabled.
igmpproxy[3198]: Config: Got a phyint token.
igmpproxy[3198]: Config: IF: Config for interface eth1.8.
igmpproxy[3198]: Config: IF: Got upstream token.
igmpproxy[3198]: Config: IF: Got ratelimit token '0'.
igmpproxy[3198]: Config: IF: Got threshold token '1'.
igmpproxy[3198]: Config: IF: Got altnet token 239.35.0.0/16.
igmpproxy[3198]: Config: IF: Altnet: Parsed altnet to 239.35/16.
igmpproxy[3198]: Config: IF: Got altnet token 217.0.119.0/24.
igmpproxy[3198]: Config: IF: Altnet: Parsed altnet to 217.0.119/24.
igmpproxy[3198]: Config: IF: Got altnet token 193.158.34.0/23.
igmpproxy[3198]: Config: IF: Altnet: Parsed altnet to 193.158.34/23.
igmpproxy[3198]: IF name : eth1.8
igmpproxy[3198]: Next ptr : 0
igmpproxy[3198]: Ratelimit : 0
igmpproxy[3198]: Threshold : 1
igmpproxy[3198]: State : 1
igmpproxy[3198]: Allowednet ptr : 848e2b0
igmpproxy[3198]: Config: Got a phyint token.
igmpproxy[3198]: Config: IF: Config for interface eth2.
igmpproxy[3198]: Config: IF: Got downstream token.
igmpproxy[3198]: Config: IF: Got ratelimit token '0'.
igmpproxy[3198]: Config: IF: Got threshold token '1'.
igmpproxy[3198]: Config: IF: Got disabled token.
igmpproxy[3214]: select() failure; Errno(14): Bad address
igmpproxy[3214]: select() failure; Errno(14): Bad address

Die letzte Meldung wird dann permanent wiederholt.

Noch andere Ideen?

LG
Boris