[Fli4l_dev] Tarball und OPT_IGMP
Ralf Scholz
Ralf.Scholz at gmail.com
Sa Sep 13 18:38:31 CEST 2014
Moin,
Am 13.09.2014 um 14:13 schrieb Florian:
> Hallo Ralf et all,
>
>> Habe aber das gleiche Problem.
>>
>> DSL geht (braucht aber mehr CPU und mit 'in_kernel' komme ich nur auf
>> ca. 20 Mbit mit async komme ich auf 8Mbit 233MHZ CPU).
>
> Sind aber beides keine tollen Durchsatzraten. Möglicherweise ist hier
> schlicht die CPU zu langsam ;-)
>
Ja das habe ich mir auch schon gedacht ...
>> Das Bild bei IPTV friert nach ca. 10 sek ein.
>>
>>
>> fli4l 3.9.0-r32667-testing # ps | grep igmpproxy
>> 2220 root 560 S igmpproxy /etc/igmpproxy.conf
>> 4219 root 1160 S {exe} grep igmpproxy
>> fli4l 3.9.0-r32667-testing #
>
> Gut, das bedeutet, dass der igmpproxy an sich schon einmal läuft :)
>
> Kannst du bitte mal syslog einschalten und die entsprechenden
> Ausschnitte posten, wenn du
>
> IGMPPROXY_DEBUG='yes'
> IGMPPROXY_DEBUG2='yes'
>
> gesetzt hast?
>
Das hier ist vom Moment an dem der Router online ging bis zum Moment wo
das Bild eingefroren ist.
2014-09-13 18:27:56 Local2.Notice 192.168.6.1 pppd[2507]: PAP
authentication succeeded
2014-09-13 18:27:56 Local2.Notice 192.168.6.1 pppd[2507]: peer from
calling number 00:30:88:1F:06:7D authorized
2014-09-13 18:27:56 Local2.Debug 192.168.6.1 pppd[2507]: sent [IPCP
ConfReq id=0x1 <addr 10.112.112.112> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
2014-09-13 18:27:56 Local2.Debug 192.168.6.1 pppd[2507]: rcvd [IPCP
ConfReq id=0xc <addr 87.186.224.24>]
2014-09-13 18:27:56 Local2.Debug 192.168.6.1 pppd[2507]: sent [IPCP
ConfAck id=0xc <addr 87.186.224.24>]
2014-09-13 18:27:56 Local2.Debug 192.168.6.1 pppd[2507]: rcvd [IPCP
ConfNak id=0x1 <addr 93.204.209.163> <ms-dns1 217.0.43.1> <ms-dns2
217.0.43.193>]
2014-09-13 18:27:56 Local2.Debug 192.168.6.1 pppd[2507]: sent [IPCP
ConfReq id=0x2 <addr 93.204.209.163> <ms-dns1 217.0.43.1> <ms-dns2
217.0.43.193>]
2014-09-13 18:27:56 Local2.Debug 192.168.6.1 pppd[2507]: rcvd [IPCP
ConfAck id=0x2 <addr 93.204.209.163> <ms-dns1 217.0.43.1> <ms-dns2
217.0.43.193>]
2014-09-13 18:27:56 Local2.Warning 192.168.6.1 pppd[2507]: Local IP
address changed to 93.204.209.163
2014-09-13 18:27:56 Local2.Warning 192.168.6.1 pppd[2507]: Remote IP
address changed to 87.186.224.24
2014-09-13 18:27:57 Local2.Info 192.168.6.1 pppd[2507]: Open UDP
93.204.209.163:1026 -> 193.158.35.120:43962
2014-09-13 18:27:57 Local2.Debug 192.168.6.1 pppd[2507]: sent [IP data]
45 60 00 8d 1b a1 00 00 ...
2014-09-13 18:27:57 Local2.Debug 192.168.6.1 pppd[2507]: Script
/etc/ppp/ip-up started (pid 2867)
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: starting
(ppp0 eth1.7 0 93.204.209.163 87.186.224.24)...
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: executing
ip-up scripts ...
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: default route
interface 'pppoe' comes up
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: executing
/etc/ppp/ip-up010.dhcp-fwsetup
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: executing
/etc/ppp/ip-up020.fwsetup
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: setting up
dynamic IPv4 firewall rules ...
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: executing
/etc/ppp/ip-up050.conntrack
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: conntrack
v1.4.2 (conntrack-tools): 6 flow entries have been deleted.
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: executing
/etc/ppp/ip-up200.dns
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: using
nameserver 217.0.43.1
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: using
nameserver 217.0.43.193
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: read
/etc/hosts - 4 addresses
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: read
/etc/hosts.d/hosts.dhcp - 0 addresses
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: read
/etc/hosts.d/hosts.global - 0 addresses
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 168.192.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 31.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 30.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 29.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 28.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 27.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 26.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 25.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 24.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 23.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 22.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 21.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 20.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 19.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 18.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 17.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 16.172.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 113.0.203.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 100.51.198.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 2.0.192.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 0.0.192.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 254.169.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 10.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain 127.in-addr.arpa
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using local
addresses only for domain lan.fli4l
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using
nameserver 217.0.43.1#53
2014-09-13 18:27:58 Local0.Info 192.168.6.1 dnsmasq[2064]: using
nameserver 217.0.43.193#53
2014-09-13 18:27:58 Local2.Notice 192.168.6.1 ip-up[2867]: terminating ...
2014-09-13 18:27:58 Local2.Debug 192.168.6.1 pppd[2507]: Script
/etc/ppp/ip-up finished (pid 2867), status = 0x0
2014-09-13 18:30:42 Daemon.Info 192.168.6.1 dhclient: DHCPDISCOVER on
eth1.8 to 255.255.255.255 port 67 interval 3
2014-09-13 18:30:43 Local0.Info 192.168.6.1 dnsmasq-dhcp[2064]:
DHCPDISCOVER(eth0) e4:e0:c5:81:31:5f
2014-09-13 18:30:43 Local0.Info 192.168.6.1 dnsmasq-dhcp[2064]:
DHCPOFFER(eth0) 192.168.6.103 e4:e0:c5:81:31:5f
2014-09-13 18:30:43 Local0.Info 192.168.6.1 dnsmasq-dhcp[2064]:
DHCPDISCOVER(eth0) e4:e0:c5:81:31:5f
2014-09-13 18:30:43 Local0.Info 192.168.6.1 dnsmasq-dhcp[2064]:
DHCPOFFER(eth0) 192.168.6.103 e4:e0:c5:81:31:5f
2014-09-13 18:30:43 Local0.Info 192.168.6.1 dnsmasq-dhcp[2064]:
DHCPREQUEST(eth0) 192.168.6.103 e4:e0:c5:81:31:5f
2014-09-13 18:30:43 Local0.Info 192.168.6.1 dnsmasq-dhcp[2064]:
DHCPACK(eth0) 192.168.6.103 e4:e0:c5:81:31:5f
2014-09-13 18:30:46 Daemon.Info 192.168.6.1 dhclient: DHCPDISCOVER on
eth1.8 to 255.255.255.255 port 67 interval 8
2014-09-13 18:30:46 Daemon.Info 192.168.6.1 dhclient: DHCPREQUEST on
eth1.8 to 255.255.255.255 port 67
2014-09-13 18:30:46 Daemon.Info 192.168.6.1 dhclient: DHCPOFFER from
84.169.255.254
2014-09-13 18:30:46 Daemon.Info 192.168.6.1 dhclient: DHCPACK from
84.169.255.254
2014-09-13 18:30:46 Daemon.Info 192.168.6.1 dhcp-client: DHCP event 'BOUND'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_broadcast_address='84.169.255.255'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_broadcast_arg='broadcast 84.169.255.255'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_dhcp_lease_time='86400'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_dhcp_message_type='5'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_dhcp_rebinding_time='75600'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_dhcp_renewal_time='43200'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_dhcp_server_identifier='193.158.131.1'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_expiry='1410712917'
2014-09-13 18:30:46 Daemon.Debug 192.168.6.1 dhcp-client:
new_ip_address='84.169.230.223'
2014-09-13 18:30:47 Daemon.Debug 192.168.6.1 dhcp-client:
new_network_number='84.169.224.0'
2014-09-13 18:30:47 Daemon.Debug 192.168.6.1 dhcp-client:
new_server_name='DHBER001'
2014-09-13 18:30:47 Daemon.Notice 192.168.6.1 dhcp-client: Event: up,
local: '84.169.230.223', remote=''
2014-09-13 18:30:47 Daemon.Info 192.168.6.1 dhclient: bound to
84.169.230.223 -- renewal in 38843 seconds.
> Außerdem hätte ich gerne mal einen Abzug der /etc/igmpproxy.conf vom fli4l.
Bitte schön
fli4l 3.9.0-r32667-testing # cat /etc/igmpproxy.conf
# imgpproxy.conf for OPT_IGMPPROXY package
# This script is built automatically
#
quickleave
# configure upstream
phyint eth1.8 upstream ratelimit 0 threshold 1
altnet 239.35.0.0/16
altnet 217.0.119.0/24
altnet 193.158.34.0/23
# configure downstream
phyint eth2 downstream ratelimit 0 threshold 1
whitelist 239.35.0.0/16
# configure disabled interface
phyint lo disabled
phyint eth0 disabled
phyint eth1 disabled
phyint eth1.7 at eth1 disabled
phyint eth1.8 at eth1 disabled
fli4l 3.9.0-r32667-testing #
Ich hoffe du kannst damit etwas anfangen.
Viele grüße Ralf
>
> Viele Grüße
>
> Flo
>
Mehr Informationen über die Mailingliste Fli4l_dev