[fli4l] Fli4l 4.0.0 auf WRAP/ALIX.2 Bootet nicht zu Ende
Friedhold Schuster
f.schuster at gmx.de
Di Jan 22 08:42:04 CET 2019
Hallo an alle,
weiter gehts, Schweißabwisch.....
ich ging davon aus, einen WRAP zu benutzen, aber es ist ein ALIX.
also
OPT_HWSUPP='yes'
HWSUPP_TYPE='pcengines-alix'
danach das Problem mit cron gelöst (schulterklopf).
hier meine alte 3.6 rc.cfg auf dem ALIX, die funktioniert:
------------------------------------------------------------
AUTO='99'
BASE='yes'
HOSTNAME='fli4l'
PASSWORD='xxxxx'
BOOT_TYPE='hd'
MOUNT_BOOT='rw'
BOOTMENU_TIME='20'
TIME_INFO='MEZ-1MESZ,M3.5.0,M10.5.0/3'
KERNEL_VERSION='2.6.16.62'
KERNEL_BOOT_OPTION='nokbd reboot=bios'
COMP_TYPE_KERNEL='lzma'
COMP_TYPE_ROOTFS='lzma'
COMP_TYPE_OPT='lzma'
IP_CONNTRACK_MAX=''
POWERMANAGEMENT='none'
.
.
.
OPT_MAKEKBL='no'
NET_DRV_N='2'
NET_DRV_1='via-rhine'
NET_DRV_1_OPTION=''
NET_DRV_2='ath_pci'
NET_DRV_2_OPTION='countrycode=276'
IP_NET_N='1'
IP_NET_1='172.18.2.99/24'
IP_NET_1_DEV='eth1'
------------------------------------------------------------
Dazu meine base.txt auf dem 4.0.0 (soll Ethernet-Router werden)
------------------------------------------------------------
HOSTNAME='fli4l'
PASSWORD='xxxxx'
BOOT_TYPE='hd'
LIBATA_DMA='disabled'
MOUNT_BOOT='rw'
BOOTMENU_TIME='20'
TIME_INFO='MEZ-1MESZ,M3.5.0,M10.5.0/3'
RTC_SYNC='hwclock'
KERNEL_VERSION='4.4.169'
KERNEL_BOOT_OPTION='nokbd reboot=bios'
COMP_TYPE_OPT='lzma'
IP_CONNTRACK_MAX=''
POWERMANAGEMENT='none'
NET_DRV[]='via-rhine'
{
OPTION=''
}
.
.
.
# Networks für Ethernet-Router:
OPT_IPV4='yes'
IP_NET[1]='172.18.1.99/24'
{
DEV='eth0'
}
IP_NET[2]='172.18.2.99/24'
{
DEV='eth1'
}
.
.
.
IP_ROUTE[]='0.0.0.0/0 172.18.1.1'
------------------------------------------------------------
Nun meine (für wichtig befundene) boot-Fehler und Meldungen auf dem Wrap:
PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 848A SanDisk SDCFHSNJC-004G
Phys C/H/S 7751/16/63 Log C/H/S 968/128/63
SYSLINUX 4.04 EDD 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al
SYSLINUX 4.04 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al
n <=> boot fli4l standard installation
Version: 4.0.0-r54860-testing
r <=> boot fli4l recover installation
Version: 3.6.2
Choose character from first column to select version and press ENTER
The standard installation will be automatically booted
Unknown keyword in configuration file: DEVICETREEDIR
Unknown keyword in configuration file: DEVICETREEDIR
Unknown keyword in configuration file: DEVICETREEDIR
boot:
Loading /kernel.....
Loading /rootfs.img....ready.
Linux version 4.4.169 (buildroot at buildroot) (gcc version 7.3.0
(Buildroot 2018.02.8) ) #1 SMP Mon Nov 26 23:40:00 CET 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
DMI not present or invalid.
e820: last_pfn = 0x10000 max_arch_pfn = 0x100000
MTRR: Disabled
x86/PAT: MTRRs disabled, skipping PAT initialization too.
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
RAMDISK: [mem 0x0fe16000-0x0fffefff]
0MB HIGHMEM available.
256MB LOWMEM available.
mapped low ram: 0 - 10000000
low ram: 0 - 10000000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x000000000fffffff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000000fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000000fffffff]
Using APIC driver default
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present or hardware disabled
APIC: disable apic facility
APIC: switched to apic NOOP
e820: [mem 0x10000000-0xffefffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 16 pages/cpu @cfc03000 s34060 r0 d31476 u65536
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64927
Kernel command line: load_ramdisk=1 initrd=/rootfs.img fli4l_mode=normal
console=ttyS0,38400n8 nokbd reboot=bios printk.time=0 ipv6.disable=1
acpi=off BOOT_IMAGE=/kernel
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 251160K/261756K available (3651K kernel code, 301K rwdata, 1304K
rodata, 444K init, 464K bss, 10596K reserved, 0K cma-reserved, 0K highmem)
virtual kernel memory layout:
fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
.init : 0xc1525000 - 0xc1594000 ( 444 kB)
.data : 0xc1391010 - 0xc1523780 (1609 kB)
.text : 0xc1000000 - 0xc1391010 (3652 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:2304 nr_irqs:32 16
Console: colour dummy device 80x25
console [ttyS0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 498.031 MHz processor
Calibrating delay loop (skipped), value calculated using timer
frequency.. 996.06 BogoMIPS (lpj=4980310)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to
generic retpoline
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context
switch
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 12K
smpboot: weird, boot CPU (#0) not listed by the BIOS
smpboot: SMP motherboard not detected
smpboot: SMP disabled
smpboot: Local APIC not detected. Using dummy APIC emulation.
Performance Events: no PMU driver, software events only.
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (996.06 BogoMIPS)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
NET: Registered protocol family 16
cpuidle: using governor menu
clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
1601818034827 ns
PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
PCI: Using configuration type 1 for base access
ACPI: Interpreter disabled.
vgaarb: loaded
dmi: Firmware registration failed.
PCI: Probing PCI hardware
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:01.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource pit
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: PnP BIOS support was not detected.
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 1956K
platform rtc_cmos: registered platform RTC device (no PNP device found)
SSE2 instructions are not detected.
PCLMULQDQ-NI instructions are not detected.
alix: system is recognized as "PC Engines ALIX.2 v0.99h"
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5b8ef9f82,
max_idle_ns: 881590410610 ns
clocksource: Switched to clocksource tsc
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
loop: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
dmi-sysfs: dmi entry is absent.
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (3955 buckets, 15820 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy <kaber at trash.net>
nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo at netfilter.org>
xt_time: kernel timezone is -0000
ip_set: protocol 6
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
Initializing XFRM netlink socket
IPv6: Loaded, but administratively disabled, reboot required to enable
IPv6: ah6_init: can't add xfrm type
IPv6: esp6_init: can't add xfrm type
IPv6: ipcomp6_init: can't add xfrm type
mip6: Mobile IPv6
mip6: mip6_init: can't add xfrm type(destopt)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
NET: Registered protocol family 15
mpls_gso: MPLS GSO support
mce: Unable to init device /dev/mcelog (rc: -5)
Using IPI No-Shortcut mode
registered taskstats version 1
console [netcon0] enabled
netconsole: network logging started
rtc_cmos rtc_cmos: setting system clock to 2005-12-24 23:49:28 UTC
(1135468168)
Freeing unused kernel memory: 444K
Write protecting the kernel text: 3656k
Write protecting the kernel read-only data: 1304k
init started: BusyBox v1.27.2 (fli4l)
starting pid 117, tty '': '/etc/rc'
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: exe: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
random: sh: uninitialized urandom read (4 bytes read, 8 bits of entropy
available)
rootfs on / type rootfs (rw,size=125580k,nr_inodes=31395)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
input: PC Speaker as /devices/platform/pcspkr/input/input0
[32;01m*[0m running boot scripts
[32;01m*[0m [36;01m[rc000.base][0m basic setup for booting...
[32;01m*[0m Wrapping of modutils disabled ()
SCSI subsystem initialized
[A[71C [34;01m[ [32;01mOK[34;01m ][0m
[32;01m*[0m [36;01m[rc010.hddrv][0m loading disk drivers ...
[A[71C [34;01m[ [32;01mOK[34;01m ][0m
[32;01m*[0m [36;01m[rc020.hd-generic][0m loading generic disk
drivers ...
scsi host0: ata_generic
scsi host1: ata_generic
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ata1.00: CFA: SanDisk SDCFHSNJC-004G, HDX 7.08, max UDMA/100
ata1.00: 7813120 sectors, multi 0: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFHSNJ 7.08 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 7813120 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
------------------
und hier bleibt er hängen.
ich hoffe, ich habe nicht zuviel oder zuwenig geschrieben. Was kann ich
noch liefern?
Dankeschön
Mehr Informationen über die Mailingliste Fli4L