[fli4l] HD install auf APU?==?utf-8?Q?.1D4 mit mSATA funktioniert?==?utf-8?Q? nicht

Do Feb 23 14:54:16 CET 2017

Hallo,
ich versuche die aktuelle 3.10.8 Version auf einen APU.1D4 mit eine
Transcend mSATA zu instalieren. Dazu habe ich die SD-Karte mit
opt_hdinstall=ja konfiguriert.

Der Rechner bootet auch aber ich kann hdinstall nicht ausführen. 
Brauche ich für die Transcend MSA370 einen speziellen Treiber?
Es gibt einige Meldungen beim Booten die ich alleridngs nicht so ganz
verstehe.

Hier das boot Protokoll:

PCEngines apu2
coreboot build 20160311
-2064 MB DRAM

SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
Found mainboard PC Engines PCEngines apu2
multiboot: eax=0, ebx=0
boot order:
1: /pci at i0cf8/usb at 10/usb-*@1
2: /pci at i0cf8/usb at 10/usb-*@2
3: /pci at i0cf8/usb at 10/usb-*@3
4: /pci at i0cf8/usb at 10/usb-*@4
5: /pci at i0cf8/*@14,7
6: /pci at i0cf8/*@11/drive at 0/disk at 0
7: /pci at i0cf8/*@11/drive at 1/disk at 0
8: /rom at genroms/pxe.rom
9: pxen0
10: scon1
11:
Found 21 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0x77fb7000 to 0x000f3110
Copying ACPI RSDP from 0x77fb8000 to 0x000f30e0
Copying MPTABLE from 0x77fdc000/77fdc010 to 0x000f2f30
Copying PIR from 0x77fdd000 to 0x000f2f00
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003

Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $
(wiv at coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
Term: 80x24
IO4 0
Turning on vga text mode console

SeaBIOS (version ?-20160311_005214-0c3a223c2ee6)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte
contexts
XHCI    extcap 0x1 @ feb22500
XHCI    protocol USB  3.00, 2 ports (offset 1), def 0
XHCI    protocol USB  2.00, 2 ports (offset 3), def 10
XHCI    extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci at i0cf8/*@14,7
Searching bootorder for: /rom at img/memtest
Searching bootorder for: /rom at img/setup
ata0-0: TS16GMSA370 ATA-9 Hard-Disk (15272 MiBytes)
Searching bootorder for: /pci at i0cf8/*@11/drive at 0/disk at 0
Found sdcard at 0xfeb25500: SD card SD04G 3796MiB
XHCI no devices found
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
Running option rom at c100:0003

iPXE (http://ipxe.org) 00:00.0 C100 PCI2.10 PnP PMMpmm call arg1=1
pmm call arg1=0
+77F490E0pmm call arg1=1
pmm call arg1=0
+77E890E0 C100

Searching bootorder for: /rom at genroms/pxe.rom
PCengines Press F10 key now for boot menu:
Select boot device:

1. SD card SD04G 3796MiB
2. ata0-0: TS16GMSA370 ATA-9 Hard-Disk (15272 MiBytes)
3. iPXE (PCI 00:00.0)
4. Payload [memtest]
5. Payload [setup]

Searching bootorder for: HALT
drive 0x000f2e60: PCHS=0/0/0 translation=lba LCHS=964/128/63 s=7774208
drive 0x000f2e90: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
s=31277232
Space available for UMB: c2000-ef000, f0000-f2e60
Returned 262144 bytes of ZoneHigh
e820 map has 6 items:
  0: 0000000000000000 - 000000000009f800 = 1 RAM
  1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 0000000077fae000 = 1 RAM
  4: 0000000077fae000 - 0000000078000000 = 2 RESERVED
  5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00

SYSLINUX 4.06 EDD 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et
al

SYSLINUX 4.06 2012-10-23 Copyright (C) 1994-2012 H. Peter Anvin et al
boot:
Loading kernel....
Loading rootfs.img....ready.

Linux version 3.14.79 (fli4l at eisler) (gcc version 4.9.2 (Buildroot
2014.11) ) #1 SMP Fri Nov 18 22:46:20 CET 2016
Command line: load_ramdisk=1 initrd=rootfs.img fli4l_mode=normal
console=ttyS0,115200n8 printk.time=0 ipv6.disable=1 BOOT_IMAGE=kernel
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000077fadfff] usable
BIOS-e820: [mem 0x0000000077fae000-0x0000000077ffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
No AGP bridge found
e820: last_pfn = 0x77fae max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f2f30-0x000f2f3f] mapped at
[ffff8800000f2f30]
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
init_memory_mapping: [mem 0x77a00000-0x77bfffff]
init_memory_mapping: [mem 0x74000000-0x779fffff]
init_memory_mapping: [mem 0x00100000-0x73ffffff]
init_memory_mapping: [mem 0x77c00000-0x77fadfff]
RAMDISK: [mem 0x77df1000-0x77facfff]
ACPI: RSDP 0x00000000000F30E0 000024 (v02 CORE  )
ACPI: XSDT 0x0000000077FB80E0 00005C (v01 CORE   COREBOOT 00000000 CORE
00000000)
ACPI: FACP 0x0000000077FB96F0 0000F4 (v04 CORE   COREBOOT 00000000 CORE
00000000)
ACPI: DSDT 0x0000000077FB8250 001496 (v02 AMD    COREBOOT 00010001 INTL
20140114)
ACPI: FACS 0x0000000077FB8210 000040
ACPI: SSDT 0x0000000077FB97F0 000045 (v02 CORE   COREBOOT 0000002A CORE
0000002A)
ACPI: APIC 0x0000000077FB9840 00007E (v01 CORE   COREBOOT 00000000 CORE
00000000)
ACPI: HEST 0x0000000077FB98C0 0001D0 (v01 CORE   COREBOOT 00000000 CORE
00000000)
ACPI: SSDT 0x0000000077FB9A90 0048A6 (v02 AMD    AGESA    00000002 MSFT
04000000)
ACPI: SSDT 0x0000000077FBE340 0007C8 (v01 AMD    AGESA    00000001 AMD 
00000001)
ACPI: HPET 0x0000000077FBEB10 000038 (v01 CORE   COREBOOT 00000000 CORE
00000000)
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x77fadfff]
ACPI: PM-Timer IO Port: 0x818
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
e820: [mem 0x78000000-0xf7ffffff] available for PCI devices
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff880077a00000 s70592 r8192 d23616
u524288
Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
483640
Kernel command line: load_ramdisk=1 initrd=rootfs.img fli4l_mode=normal
console=ttyS0,115200n8 printk.time=0 ipv6.disable=1 BOOT_IMAGE=kernel
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 1921240K/1965360K available (3176K kernel code, 362K rwdata,
1180K rodata, 780K init, 632K bss, 44120K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
        CONFIG_RCU_FANOUT set to non-default value of 32
        RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:4352 nr_irqs:1024 16
Console: colour dummy device 80x25
console [ttyS0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 998.226 MHz processor
Calibrating delay loop (skipped), value calculated using timer
frequency.. 1996.45 BogoMIPS (lpj=9982260)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 8K (ffffffff8171f000 -
ffffffff81721000)
.TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: AMD GX-412TC SOC (fam: 16, model: 30, stepping: 01)
Performance Events: AMD PMU driver.
.. version:                0
.. bit width:              48
.. generic registers:      4
.. value mask:             0000ffffffffffff
.. max period:             00007fffffffffff
.. fixed-purpose events:   0
.. event mask:             000000000000000f
x86: Booting SMP configuration:
... node  #0, CPUs:      #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (7985.80 BogoMIPS)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S2 S3 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs"
and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments
MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
PCIeCapability]
acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io
 0x0000-0x0cf7] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:02.3: System wakeup disabled by ACPI
pci 0000:00:02.4: System wakeup disabled by ACPI
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.4: PCI bridge to [bus 03]
ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
ACPI: Enabled 4 GPEs in block 00 to 1F
vgaarb: loaded
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
pci 0000:00:02.2:   bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:02.3:   bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:02.4:   bridge window [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1776K (ffff880077df1000 - ffff880077fad000)
perf: AMD NB counters detected
perf: AMD L2I counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 1024 (order: 4, 65536 bytes)
msgmni has been set to 3755
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:02.2: device [1022:1439] has invalid IRQ; check vendor
BIOS
pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor
BIOS
pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor
BIOS
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
GHES: Failed to enable APEI firmware first mode.
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a
16550A
brd: module loaded
loop: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 998.127 MHz
i8042: No controller found
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy <kaber at trash.net>
xt_time: kernel timezone is -0000
ip_set: protocol 6
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
IPv6: Loaded, but administratively disabled, reboot required to enable
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
console [netcon0] enabled
netconsole: network logging started
Freeing unused kernel memory: 780K (ffffffff8165c000 -
ffffffff8171f000)
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 908K (ffff88000131d000 -
ffff880001400000)
Freeing unused kernel memory: 868K (ffff880001527000 -
ffff880001600000)
init started: BusyBox v1.22.1 (fli4l)
starting pid 1, tty '': '/etc/rc'
Creating static device nodes...
Switched to clocksource tsc
rootfs on / type rootfs (rw,size=960620k,nr_inodes=240155)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
input: PC Speaker as /devices/platform/pcspkr/input/input0
random: sed: uninitialized urandom read (6 bytes read, 9 bits of entropy
available)
   running boot scripts
-> basic setup for booting... (/etc/boot.d/rc000.base)
   Wrapping of modutils disabled ()
SCSI subsystem initialized
-> finished basic setup for booting... (/etc/boot.d/rc000.base)
-> loading generic disk drivers ... (/etc/boot.d/rc020.hd-generic)
scsi0 : pata_legacy
ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
scsi1 : pata_legacy
ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA
mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio
slum part
scsi2 : ahci
scsi3 : ahci
ata3: SATA max UDMA/133 abar m1024 at 0xfeb25000 port 0xfeb25100 irq 19
ata4: SATA max UDMA/133 abar m1024 at 0xfeb25000 port 0xfeb25180 irq 19
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-9: TS16GMSA370, O0918B, max UDMA/133
ata3.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for PIO4
scsi 2:0:0:0: Direct-Access     ATA      TS16GMSA370      O091 PQ: 0
ANSI: 5
sd 2:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: unknown partition table
sd 2:0:0:0: [sda] Attached SCSI disk
-> finished loading generic disk drivers ...
(/etc/boot.d/rc020.hd-generic)
-> scanning for partition tables on storage ...
(/etc/boot.d/rc040.partitions)
 sda: unknown partition table
-> finished scanning for partition tables on storage ...
(/etc/boot.d/rc040.partitions)
-> mounting boot device ... (/etc/boot.d/rc100.hdboot)
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
mount: mounting /dev/sda on /boot failed: Invalid argument
ERR: Unable to locate boot volume!
ERR: Available partitions:
ERR: major minor  #blocks  name
ERR:
ERR: 8        0   15638616 sda
ERR: Could not mount boot volume, check partitions and drivers!

BusyBox v1.22.1 (fli4l) built-in shell (ash)
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
# hrandom: nonblocking pool is initialized

/bin/sh: h: not found
# hdinstall
/bin/sh: hdinstall: not found
#

Gruß
Holger