[fli4l] 3.10.1 Eigenartiges Verhalten beim booten

[Stefan Puschek]

Hallo Florian,
..
>> Hardware šlix 2D13
>> Software “.10.1 ohne Recovery - bringt ja ohne RS232 nix
>> welche weiteren Infos hättet Ihr gerne?
> 
> Ich habe das gleiche Board im Zugriff. Sag doch bitte mal, was du fü
r
> Pakete drauf hast und wie die Einstellungen in HWSUPP sind. Ich versuche
> dann mal, das nachzustellen.

dann hilft Dir vielleicht die rc.conf ohne Passwörter (geheim)

aber wenn ich das richtig interpretiere, sind zu diesem Zeitpunkt die 
Pakete doch noch garnicht ausgepackt... oder irre ich mich hier?

Groetjes
Stefan

#
# generated by mkfli4l (Revision: 35662)
#
# package 'base'
#
AUTO='99'
BASE='yes'
HOSTNAME='stan'
PASSWORD='geheim'
BOOT_TYPE='hd'
LIBATA_DMA='enabled'
MOUNT_BOOT='rw'
BOOTMENU_TIME='1'
TIME_INFO='MEZ-1MESZ,M3.5.0,M10.5.0/3'
KERNEL_VERSION='3.14.29'
KERNEL_BOOT_OPTION=''
COMP_TYPE_OPT='xz'
IP_CONNTRACK_MAX=''
POWERMANAGEMENT='none'
LOCALE='de'
CONSOLE_BLANK_TIME=''
BEEP='no'
SER_CONSOLE='yes'
SER_CONSOLE_IF='0'
SER_CONSOLE_RATE='38400'
DEBUG_STARTUP='no'
KEYBOARD_LOCALE='auto'
NET_DRV_N='2'
NET_DRV_1='via-rhine'
NET_DRV_1_OPTION=''
NET_DRV_2='ath5k'
NET_DRV_2_OPTION='nohwcrypt=1'
IP_NET_N='1'
IP_NET_1='192.168.6.1/24'
IP_NET_1_DEV='br0'
IP_ROUTE_N='0'
PF_INPUT_POLICY='REJECT'
PF_INPUT_ACCEPT_DEF='yes'
PF_INPUT_LOG='no'
PF_INPUT_LOG_LIMIT='3/minute:5'
PF_INPUT_REJ_LIMIT='1/second:5'
PF_INPUT_UDP_REJ_LIMIT='1/second:5'
PF_INPUT_N='1'
PF_INPUT_1='IP_NET_1 ACCEPT'
PF_FORWARD_POLICY='REJECT'
PF_FORWARD_ACCEPT_DEF='yes'
PF_FORWARD_LOG='no'
PF_FORWARD_LOG_LIMIT='3/minute:5'
PF_FORWARD_REJ_LIMIT='1/second:5'
PF_FORWARD_UDP_REJ_LIMIT='1/second:5'
PF_FORWARD_N='7'
PF_FORWARD_1='tmpl:samba DROP'
PF_FORWARD_2='state:INVALID DROP'
PF_FORWARD_3='192.168.6.129 DROP NOLOG'
PF_FORWARD_4='mac:1c:af:f7:c9:b1:20 DROP NOLOG'
PF_FORWARD_5='192.168.6.130 DROP NOLOG'
PF_FORWARD_6='mac:00:b3:f6:00:4c:d5 DROP NOLOG'
PF_FORWARD_7='IP_NET_1 ACCEPT'
PF_OUTPUT_POLICY='ACCEPT'
PF_OUTPUT_ACCEPT_DEF='yes'
PF_OUTPUT_LOG='no'
PF_OUTPUT_LOG_LIMIT='3/minute:5'
PF_OUTPUT_REJ_LIMIT='1/second:5'
PF_OUTPUT_UDP_REJ_LIMIT='1/second:5'
PF_OUTPUT_N='0'
PF_POSTROUTING_N='1'
PF_POSTROUTING_1='IP_NET_1 MASQUERADE'
PF_PREROUTING_N='1'
PF_PREROUTING_1='dynamic:54203 DNAT:192.168.6.3'
PF_PREROUTING_CT_ACCEPT_DEF='yes'
PF_PREROUTING_CT_N='1'
PF_PREROUTING_CT_1='tmpl:ftp IP_NET_1 HELPER:ftp'
PF_OUTPUT_CT_ACCEPT_DEF='yes'
PF_OUTPUT_CT_N='0'
PF_USR_CHAIN_N='0'
DOMAIN_NAME='southpark.lan'
DNS_FORWARDERS=''
START_IMOND='yes'
IMOND_PORT='5000'
IMOND_PASS=''
IMOND_ADMIN_PASS=''
IMOND_LED=''
IMOND_BEEP='no'
IMOND_LOG='no'
IMOND_LOGDIR='auto'
IMOND_ENABLE='yes'
IMOND_DIAL='yes'
IMOND_ROUTE='yes'
IMOND_REBOOT='yes'
IP_DYN_ADDR='yes'
DIALMODE='auto'
#
# package 'dns_dhcp'
#
HOST_N='24'
…
viele hosts
…
HOST_EXTRA_N='0'
OPT_DNS='yes'
DNS_BIND_INTERFACES='no'
DNS_LISTEN_N='0'
DNS_VERBOSE='no'
DNS_MX_SERVER=''
DNS_FORBIDDEN_N='0'
DNS_REDIRECT_N='0'
DNS_BOGUS_PRIV='yes'
DNS_FILTERWIN2K='yes'
DNS_LOCAL_HOST_CACHE_TTL='60'
DNS_SUPPORT_IPV6='no'
DNS_ZONE_DELEGATION_N='0'
DNS_REBINDOK_N='0'
OPT_DHCP='yes'
DHCP_TYPE='dnsmasq'
DHCP_VERBOSE='no'
DHCP_LS_TIME_DYN='3600'
DHCP_MAX_LS_TIME_DYN='7200'
DHCP_LS_TIME_FIX='86400'
DHCP_MAX_LS_TIME_FIX='604800'
DHCP_LEASES_DIR='auto'
DHCP_WINSSERVER_1=''
DHCP_WINSSERVER_2=''
DHCP_RANGE_N='1'
DHCP_RANGE_1_NET='IP_NET_1'
DHCP_RANGE_1_START='192.168.6.200'
DHCP_RANGE_1_END='192.168.6.250'
DHCP_RANGE_1_DNS_SERVER1=''
DHCP_RANGE_1_DNS_SERVER2=''
DHCP_RANGE_1_NTP_SERVER=''
DHCP_RANGE_1_GATEWAY=''
DHCP_EXTRA_RANGE_N='0'
DHCP_DENY_MAC_N='0'
#
# package 'advanced_networking'
#
OPT_BRIDGE_DEV='yes'
BRIDGE_DEV_N='1'
BRIDGE_DEV_1_NAME='bridge0'
BRIDGE_DEV_1_DEVNAME='br0'
BRIDGE_DEV_1_DEV_N='2'
BRIDGE_DEV_1_DEV_1_DEV='eth0'
BRIDGE_DEV_1_DEV_2_DEV='wlan0'
DEV_MTU_N='0'
#
# package 'chrony'
#
OPT_CHRONY='yes'
CHRONY_TIMESERVER_N='4'
CHRONY_TIMESERVER_1='0.de.pool.ntp.org'
CHRONY_TIMESERVER_2='1.de.pool.ntp.org'
CHRONY_TIMESERVER_3='2.de.pool.ntp.org'
CHRONY_TIMESERVER_4='3.de.pool.ntp.org'
CHRONY_TIMESERVICE='yes'
#
# package 'dsl'
#
OPT_PPPOE='yes'
PPPOE_NAME='DSL'
PPPOE_USEPEERDNS='yes'
PPPOE_ETH='eth1'
PPPOE_TYPE='in_kernel'
PPPOE_DEBUG='no'
PPPOE_USER='geheim'
PPPOE_PASS='geheim'
PPPOE_HUP_TIMEOUT='never'
PPPOE_CHARGEINT='60'
PPPOE_TIMES='Mo-Su:00-24:0.0:Y'
PPPOE_FILTER='no'
PPPOE_MTU='1492'
PPPOE_MRU='1492'
#
# package 'easycron'
#
OPT_EASYCRON='yes'
EASYCRON_MAIL='no'
EASYCRON_N='2'
EASYCRON_1_CUSTOM=''
EASYCRON_1_COMMAND='/sbin/reboot'
EASYCRON_1_TIME='0 6 * * *'
EASYCRON_2_CUSTOM=''
EASYCRON_2_COMMAND='fli4lctrl dial pppoe'
EASYCRON_2_TIME='5 6 * * *'
#
# package 'hd'
#
OPT_HDDRV='yes'
HDDRV_N='1'
HDDRV_1='pata_amd'
HDDRV_1_OPTION=''
#
# package 'httpd'
#
OPT_HTTPD='yes'
HTTPD_PORT='80'
HTTPD_USER_N='1'
HTTPD_USER_1_USERNAME='geheim'
HTTPD_USER_1_PASSWORD='geheim'
HTTPD_USER_1_RIGHTS='all'
HTTPD_GUI_LANG='auto'
HTTPD_GUI_SKIN='default'
HTTPD_ARPING='yes'
HTTPD_ARPING_IGNORE_N='0'
#
# package 'hwsupp'
#
OPT_HWSUPP='yes'
HWSUPP_TYPE='pcengines-alix'
HWSUPP_WATCHDOG='yes'
HWSUPP_CPUFREQ='no'
HWSUPP_LED_N='3'
HWSUPP_LED_1='ready'
HWSUPP_LED_1_DEVICE='alix::1'
HWSUPP_LED_2='trigger'
HWSUPP_LED_2_DEVICE='alix::2'
HWSUPP_LED_2_PARAM='phy0rx'
HWSUPP_LED_3='trigger'
HWSUPP_LED_3_DEVICE='alix::3'
HWSUPP_LED_3_PARAM='phy0tx'
HWSUPP_BOOT_LED='0'
HWSUPP_BUTTON_N='0'
#
# package 'lcd4linux'
#
OPT_LCD4LINUX='yes'
LCD4LINUX_DRV='LCD2USB'
LCD4LINUX_ICONS='0'
LCD4LINUX_DISPLAY_SIZE='40x2'
LCD4LINUX_DSL_SPEED_IN='6048'
LCD4LINUX_DSL_SPEED_OUT='576'
LCD4LINUX_LAYOUT_N='7'
LCD4LINUX_LAYOUT_1='Row1.Col1  :ImonDSL_IP:'
LCD4LINUX_LAYOUT_2='Row1.Col22 :ImonDSLRate_In:'
LCD4LINUX_LAYOUT_3='Row1.Col32 :ImonDSLRate_Out:'
LCD4LINUX_LAYOUT_4='Row2.Col1  :Date_dd_mm_yyyy:'
LCD4LINUX_LAYOUT_5='Row2.Col12 :Time_hh_mm_ss:'
LCD4LINUX_LAYOUT_6='Row2.Col21 :ImonDSLQuantity_In:'
LCD4LINUX_LAYOUT_7='Row2.Col32 :ImonDSLQuantity_Out:'
LCD4LINUX_START_STOP_MSG='no'
LCD4LINUX_EXPERT_MODE='no'
LCD4LINUX_TEST='no'
#
# package 'mkfli4l'
#
BUILDDIR='C:\Dokumente und Einstellungen\stefan\Desktop\fli4l-3.10.1\build'
VERBOSE='yes'
FILESONLY='no'
REMOTEUPDATE='no'
DISABLE_OPTION_GUI='no'
#
# package 'sshd'
#
OPT_SSHD='yes'
SSHD_ALLOWPASSWORDLOGIN='no'
SSHD_CREATEHOSTKEYS='no'
SSHD_PORT='22'
SSHD_PUBLIC_KEY_N='0'
SSHD_PUBLIC_KEYFILE_N='1'
SSHD_PUBLIC_KEYFILE_1='putty.stan.pub'
#
# package 'tools'
#
OPT_IFTOP='yes'
OPT_IPERF='yes'
OPT_TCPDUMP='yes'
#
# package 'usb'
#
OPT_USB='yes'
USB_EXTRA_DRIVER_N='0'
#
# package 'wlan'
#
OPT_WLAN='yes'
WLAN_REGDOMAIN='DE'
WLAN_WEBGUI='no'
WLAN_N='1'
WLAN_1_MAC='00:80:48:7b:33:2f'
WLAN_1_ESSID='southpark'
WLAN_1_MODE='master'
WLAN_1_CHANNEL='13g'
WLAN_1_RATE='auto'
WLAN_1_ENC_N='0'
WLAN_1_WPA_KEY_MGMT='WPA-PSK'
WLAN_1_WPA_PSK='geheim'
WLAN_1_WPA_TYPE='2'
WLAN_1_WPA_ENCRYPTION='CCMP'
WLAN_1_ACL_POLICY='open'
WLAN_1_ACL_MAC_N='0'
WLAN_1_WPS='no'
#
# package 'base'
#
ARCH='x86'
LIBC_VERSION='0.9.33'
LOG_BOOT_SEQ='yes'
OPT_MAKEKBL='no'
PF_INPUT_ICMP_ECHO_REQ_SIZE='150'
MASQ_MODULE_N='0'
PORTFW_N='0'
OPT_SYSLOGD='no'
OPT_KLOGD='no'
OPT_LOGIP='no'
OPT_Y2K='no'
OPT_PNP='no'
OPT_ADDMODULES='no'
COMP_TYPE_ROOTFS='xz'
FLI4L_BUILDDIR='C:\fli4l-3.10.1\config'
FLI4L_BUILDDATE='2015-03-27'
FLI4L_BUILDTIME='14:30:46'
FLI4L_VERSION='3.10.1'
#
# package 'dns_dhcp'
#
OPT_HOSTS='yes'
DNS_FORWARD_LOCAL='no'
DNS_AUTHORITATIVE='no'
DNS_ZONE_NETWORK_N='0'
OPT_DHCPRELAY='no'
OPT_TFTP='no'
OPT_YADIFA='no'
#
# package 'advanced_networking'
#
OPT_BCRELAY='no'
OPT_EBTABLES='no'
OPT_BONDING_DEV='no'
OPT_VLAN_DEV='no'
OPT_ETHTOOL='no'
OPT_IPSET='no'
#
# package 'dsl'
#
PPPD_VERSION='2.4.6'
OPT_FRITZDSL='no'
OPT_PPTP='no'
OPT_POESTATUS='no'
#
# package 'hd'
#
OPT_MOUNT='no'
OPT_HDINSTALL='no'
OPT_HDSLEEP='no'
OPT_RECOVER='no'
OPT_EXTMOUNT='no'
#
# package 'httpd'
#
HTTPD_PORTFW='yes'
OPT_GUI_CONFIG='no'
OPT_OAC='no'
#
# package 'hwsupp'
#
OPT_VPN_CARD='no'
#
# package 'kernel_3_14'
#
COMP_TYPE_ROOTFS_3_14='xz'
#
# package 'sshd'
#
OPT_SSH_CLIENT='no'
OPT_PLINK_CLIENT='no'
OPT_SFTPSERVER='no'
#
# package 'tools'
#
OPT_DIG='no'
OPT_E3='no'
OPT_FTP='no'
OPT_IMONC='no'
OPT_NETCAT='no'
OPT_WGET='no'
OPT_SOCAT='no'
OPT_STRACE='no'
OPT_NGREP='no'
OPT_NTTCP='no'
OPT_LSPCI='no'
OPT_HW_DETECT='no'
OPT_I2CTOOLS='no'
OPT_IWLEEPROM='no'
OPT_ATH_INFO='no'
OPT_SHRED='no'
OPT_RTMON='no'
OPT_MTOOLS='no'
OPT_YTREE='no'
OPT_VALGRIND='no'
OPT_REAVER='no'
OPT_OPENSSL='no'
#
# package 'base'
#
KERNEL_MAJOR='3.14'
FLI4L_MD5_RC_CFG='fdf8647ab667160cc2ce75d1c1b222c7'
FLI4L_MD5_KERNEL='85d6f5d8c6de2512a5717811138fc5e5'
FLI4L_MD5_ROOTFS_IMG='1e352904c45fc85201563e8da9922590'
FLI4L_MD5_OPT_IMG='4d32fdbe89c27e3de43958df5dcafa8b'
FLI4L_MD5_SYSLINUX_CFG='b3da3b6d7bef475895c98cafe030769a'