[fli4l] WLAN auf PCMCIA Ka?==?utf-8?Q?rte erzeugt Fehler in (/et?==?utf-8?Q?c/rc.d/rc370.dns_dhcp)
Stefan Sauer
mein-fli4l-postfach at freenet.de
Mo Aug 10 18:45:55 CEST 2015
Hallo,
kann es sein, dass der DHCP-Service gestartet werden soll, obwohl
die PCMCIA Karte noch nicht richtig initialsiert ist?
Meine Konfiguration der base.txt:
IP_NET_N='1'
IP_NET_1='dhcp'
IP_NET_1_DEV='eth0'
IP_NET_2='192.168.179.254/24'
IP_NET_2_DEV='wlan0'
#-----------------------------------------------------------------------
-------
# DHCP-Server configuration:
#-----------------------------------------------------------------------
-------
OPT_DHCP='yes' # activate DHCP server: yes or no
DHCP_TYPE='dnsmasq' # use 'dnsmasq' or 'isc-dhcpd'
DHCP_VERBOSE='no' # activate verbose dhcp-information
DHCP_LS_TIME_DYN='3600' # default time for dynamic leases: 1
hour
DHCP_MAX_LS_TIME_DYN='7200' # max time for dynamic leases: 2 hours
DHCP_LS_TIME_FIX='86400' # default time for fix leases: 1 day
DHCP_MAX_LS_TIME_FIX='604800' # max time for fix leases: 1 week
DHCP_LEASES_DIR='auto' # don't touch this until you
# have read the manual!
DHCP_WINSSERVER_1='' # IP of 1st external wins-server
# (don't use if OPT_NMBD='yes'!)
DHCP_WINSSERVER_2='' # IP of 2nd external wins-server
# (don't use if OPT_NMBD='yes'!)
#-----------------------------------------------------------------------
-------
# Parameters for local Networks
#-----------------------------------------------------------------------
-------
DHCP_RANGE_N='1' # number of dhcp-ranges
DHCP_RANGE_1_NET='IP_NET_2' # reference to Network defined in
base.txt
DHCP_RANGE_1_START='192.168.179.100'
# start-IP
DHCP_RANGE_1_END='192.168.179.150'
Außerdem davon betroffen könnten noch sein:
(/etc/rc.d/rc390.dns_dhcp) ERR: dnsmasq not started!
(/etc/rc.d/rc600.tor) ERR: unknown variable 'IP_NET_2'
(/etc/rc.d/rc600.tor) ERR: unknown variable 'IP_NET_2'
(/etc/rc.d/rc650.privoxy) ERR: unknown variable 'IP_NET_2'
Gruss,
gandalf
Mehr Informationen über die Mailingliste Fli4L