[fli4l] pppoe + dm?==?utf-8?Q?9601

Klaus-Ruediger Ludwig ludwig at royal.owl.de
Fr Mär 22 16:23:57 CET 2013


butterfly schrieb am Fr, 22 März 2013 13:06
> Hi,
> 
> Am 22.03.13 12:40, schrieb Klaus-Ruediger Ludwig:
> >  einen kleine Erfolg habe ich zu vermelden.
> > 
> >  Mir war aufgefallen, dass das eth1 (dm9601) beim booten
> >  als link down gemeldet wird.
> 
> komisch...


Hallo,

hier mal die Auszüge aus dem Bootvorgang

-> loading network drivers ... (/etc/ rc.d/rc120.net)

via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine 0000:00:12.0: found PCI INT A -> IRQ 10
via-rhine 0000:00:12.0: sharing IRQ 10 with 0000:00:0b.0
via-rhine 0000:00:12.0: sharing IRQ 10 with 0000:00:10.0

eth0: VIA Rhine II at 0xf0201000, 00:90:dc:04:1c:42, IRQ 10.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link
cde1.

eth1: register 'dm9601' at usb-0000:00:10.1-1, Davicom DM9601 
   USB Ethernet, 00:60:6e:92:01:be

usbcore: registered new interface driver dm9601

-> finished loading network drivers ... (/etc/rc.d/rc120.net)

-> configuring loopback and ethernet device ... (/etc/rc.d/rc300.lo)
-> finished configuring loopback and ethernet device ...
(/etc/rc.d/rc300.lo)

-> configuring ip on network cards ... (/etc/rc.d/rc305.ip-eth)

eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

-> finished configuring ip on network cards ...
(/etc/rc.d/rc305.ip-eth)

-> starting syslogd ... (/etc/rc.d/rc325.syslogd)
-> finished starting syslogd ... (/etc/rc.d/rc325.syslogd)

-> preparing circuits ... (/etc/rc.d/rc340.circuits)

writing /etc/ppp/pap-secrets

-> finished preparing circuits ... (/etc/rc.d/rc340.circuits)

-> starting pppoe ... (/etc/rc.d/rc340.circuits.pppoe_in_kernel)

eth1: link down

PPP generic driver version 2.4.2
NET: Registered protocol family 24
Plugin rp-pppoe.so loaded.

-> finished starting pppoe ...
(/etc/rc.d/rc340.circuits.pppoe_in_kernel)

-------------------------------------------------------------

Password:

BusyBox v1.17.2 (2011-11-03 08:56:54 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.

Welcome to fli4l !

fli6l 3.6.2 # ping royal.owl.de

Starting link
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery

fli6l 3.6.2 # ip link set eth1 down
fli6l 3.6.2 # ip link set eth1 up

eth1: link up, 100Mbps, full-duplex, lpa 0x41E1

fli6l 3.6.2 # ping royal.owl.de

Starting link
PPP session is 2442
Connect: ppp0 <--> eth1
PAP authentication succeeded
peer from calling number 00:90:1A:A2:BE:C5 authorized
Local IP address changed to 87.143.140.26
Remote IP address changed to 217.0.119.114

fli6l 3.6.2 #

Zitat:
> evtl. packst du dir als Workaround opt_usercmd drauf
> damit kannst du die Befehle automatisch nach dem Boot
> ausführen lassen.
> 
> Grüße Sebastian


ja da wird sich schon eine Stelle finden wo 
ich das einbauen kann

MfG Klaus





Mehr Informationen über die Mailingliste Fli4L