[Eisfair] Raid-1 auf aktuellem E1: Festplatte ersetzen
Jürgen Witt
j-witt at web.de
Do Jun 22 12:50:31 CEST 2023
Hallo Marcus,
Am 22.06.2023 um 12:37 schrieb Marcus Röckrath:
> Hallo Jürgen,
> Möglicherweise muss man den MBR von sda und den Bootsektor in sda1 schreiben
> müssen.
da es das Produktiv-System einer Firma ist, muß ich vorher genau wissen,
daß ich denen nicht das System lahm lege.
> Ich sag immer nur: Thoamas (Z.) Hilfe!
>
> Thomas hat hier IMHO die größte Experience für Raid.
ich hoffe auch, daß er diesmal hier mitliest ;-)
> Was sagt denn smartctl?
>
> smartctl -a /dev/sda
eis # smartctl -a /dev/sda
smartctl 7.3 2022-02-28 r5338 [i686-linux-5.15.115-eisfair-1-PAE] (local
build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (SMR)
Device Model: WDC WD40EFAX-68JH4N0
Serial Number: WD-WX22D70KRP5L
LU WWN Device Id: 5 0014ee 21305d4af
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5440
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Thu Jun 22 12:42:53 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 4784) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off supp ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 151) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3039) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_ FAILED
RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 207 202 021 Pre-fail
Always -
2641
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 17
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 070 070 000 Old_age
Always -
22123
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 17
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 5
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 14
194 Temperature_Celsius 0x0022 117 110 000 Old_age Always
- 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA
_of_first_error
# 1 Short offline Completed without error 00% 22112
-
# 2 Short offline Completed without error 00% 21825
-
# 3 Short offline Completed without error 00% 21801
-
# 4 Extended offline Interrupted (host reset) 10% 21798
-
# 5 Short offline Completed without error 00% 21154
-
# 6 Extended offline Interrupted (host reset) 10% 21149
-
# 7 Short offline Completed without error 00% 20818
-
# 8 Short offline Completed without error 00% 20794
-
# 9 Short offline Completed without error 00% 20770
-
#10 Short offline Completed without error 00% 20746
-
#11 Short offline Completed without error 00% 20722
-
#12 Extended offline Interrupted (host reset) 10% 20716
-
#13 Short offline Completed without error 00% 20650
-
#14 Short offline Completed without error 00% 20626
-
#15 Extended offline Interrupted (host reset) 10% 20621
-
#16 Short offline Completed without error 00% 19812
-
#17 Short offline Completed without error 00% 19788
-
#18 Short offline Completed without error 00% 19764
-
#19 Extended offline Interrupted (host reset) 10% 19757
-
#20 Short offline Completed without error 00% 19644
-
#21 Short offline Completed without error 00% 19620
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
> smartctl -H /dev/sda
eis # smartctl -H /dev/sda
smartctl 7.3 2022-02-28 r5338 [i686-linux-5.15.115-eisfair-1-PAE] (local
build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
> smartctl -A /dev/sda
eis # smartctl -A /dev/sda
smartctl 7.3 2022-02-28 r5338 [i686-linux-5.15.115-eisfair-1-PAE] (local
build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 207 202 021 Pre-fail
Always - 2641
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 17
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 070 070 000 Old_age
Always - 22123
10 Spin_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 17
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 5
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 14
194 Temperature_Celsius 0x0022 117 110 000 Old_age Always
- 30
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age
Offline - 0
Sieht für mich erst einmal unverdächtig aus, oder?
Toll, daß Du hier immer noch so aktiv Hilfe leistet!
Danke
Jürgen
Mehr Informationen über die Mailingliste Eisfair