[Eisfair] Re3a Fehler nach eisfair-update3a eisfair fc3a4hrt gleich wieder runter3a libkmod3a kmod5fmodule5fnew5ffrom5floaded3a could not open /proc/modules3a No such file or directory
Helmut Pohl
helmut_pohl at arcor.de
Sa Sep 10 13:20:33 CEST 2022
Hallo Markus,
Am 10.09.2022 um 09:11 schrieb Marcus Röckrath:
> Hallo Helmut,
>
> Helmut Pohl wrote:
>
>>>> Komisch finde ich es, dass das Paket eisman die Ursache für den Fehler
>>>> ist.
>>>
>>> Ein Update von eisman kann natürlich auch weitere Paket mit updaten; hier
>>> die direkten Requirements von eisman:
>>>
>>> <require-package>base 2.8.25</require-package>
>>> <require-package>base-certificate 3.0.0</require-package>
>>> <require-package>bzip2 3.2.0</require-package>
>>> <require-package>coreutils 3.2.0</require-package>
>>> <require-package>gawk 3.2.2</require-package>
>>> <require-package>grep 3.2.0</require-package>
>>> <require-package>gzip 3.2.0</require-package>
>>> <require-package>lsb-release 3.0.0</require-package>
>>> <require-package>sed 3.2.0</require-package>
>>> <require-package>tar 3.2.0</require-package>
>>> <require-package>wget 3.2.0</require-package>
>>> <require-package>logger 3.2.0</require-package>
>>> <linked-package>eisfair-base 3.2.3</linked-package>
>>>
>>> Was genau mit eisman upgedatet wurde, kannst du /var/log/log.eis-install
>>> entnehmen.
>>
>> Ich habe den eis1 soweit hochgezogen, bis
>>
>> sysuser-shadow
>> eisman
>> eisfair-base
>
> Davon ist nur eisfair-base plattformspezifisch. Unterschiedlich sind aber
> nur die echten Binaries, die weiteren Bestandteile sind hier ebenso in e1
> und e64 gleich.
>
> eisman enthält nur Skripte zum Paketupdate und hat mit dem Bootvorgang
> nichts zu tun.
>
> Auch sysuser-shadow hat mit dem Boot nichts zu tun, bei dessen Installation
> passiert IMHO auch nichts.
>
>> übrig blieben. Die angestoßene Installation von eisfair-base
>> installierte die o.g. Module mit. Allerdings war das anschließende
>> Booten nicht möglich. Es erschien wieder das Fehlerbild.
>>
>> Es muss also etwas sein, dass in diesen Modulen enthalten ist, dass den
>> 4.9.255 Kernel nicht booten lässt.
>
> Von obigen Paketen kann es dann nur eisfair-base sein.
>
> Logisch erschließt sich mir das sowieso nicht, da ich noch keinen
> Ansatzpunkt sehe, warum beim Boot ein Problem mit /proc existiert.
>
> Ganz doofe Idee: Gibt es im Root-Verzeichnis das Verzeichnis proc?
Natürlich, vorher hatte das System ja gebootet.
>
> Bitte auch mal die Bootmeldungen eines funktionierenden Boots.
>
hier die Bootmeldung eines virtuelllen eis32, gebootet wird unter xen
mit grub:
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /old-kernel modules=ext4 console=hvc0 root=/dev/xvda3
initrd /old-initrd.gz
============= Init TPM Front ================
Tpmfront:Error Unable to read device/vtpm/0/backend-id during tpmfront
initialization! error = ENOENT
Tpmfront:Info Shutting down tpmfront
close blk: backend=/local/domain/0/backend/vbd/17/51712
node=device/vbd/51712
Reserving virtual address space above 0xf5800000 (rounded to 0xf5800000)
Linux version 4.9.255-eisfair-1-VIRT (root at basebox32) (gcc version 9.3.1
20200406 [revision 6db837a5288ee3ca5ec504fbd5a765817e556ac2] (eisfair
Linux) ) #0 SMP Thu Jun 3 01:43:22 CEST 2021
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using
'standard' format.
ACPI in unprivileged domain disabled
Released 0 page(s)
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x000000003fffffff] usable
NX (Execute Disable) protection: active
DMI not present or invalid.
Hypervisor detected: Xen
e820: last_pfn = 0x40000 max_arch_pfn = 0x1000000
MTRR: Disabled
x86/PAT: MTRRs disabled, skipping PAT initialization too.
x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
RAMDISK: [mem 0x02000000-0x0336bfff]
300MB HIGHMEM available.
723MB LOWMEM available.
mapped low ram: 0 - 2d3fe000
low ram: 0 - 2d3fe000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x000000002d3fdfff]
HighMem [mem 0x000000002d3fe000-0x000000003fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000003fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000003fffffff]
p2m virtual area at edc00000, size is 4000000
Remapped 0 page(s)
Using APIC driver Xen PV
SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
Found and enabled local APIC!
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
e820: [mem 0x40000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on Xen
Xen version: 4.12.4 (preserve-AD)
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
percpu: Embedded 18 pages/cpu s43148 r0 d30580 u73728
PV qspinlock hash table entries: 512 (order: 0, 4096 bytes)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260237
Kernel command line: modules=ext4 console=hvc0 root=/dev/xvda3
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (0002d3fe:00040000)
Initializing Movable for node 0 (00000000:00000000)
Memory: 1005736K/1048188K available (5979K kernel code, 328K rwdata,
1504K rodata, 620K init, 352K bss, 42452K reserved, 0K cma-reserved,
307208K highmem)
virtual kernel memory layout:
fixmap : 0xf5716000 - 0xf57ff000 ( 932 kB)
pkmap : 0xf5400000 - 0xf5600000 (2048 kB)
vmalloc : 0xedbfe000 - 0xf53fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xed3fe000 ( 723 MB)
.init : 0xc17a5000 - 0xc1840000 ( 620 kB)
.data : 0xc15d71e4 - 0xc17a3300 (1840 kB)
.text : 0xc1000000 - 0xc15d71e4 (5980 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
Using NULL legacy PIC
NR_IRQS:2304 nr_irqs:32 0
xen:events: Using FIFO-based ABI
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb,
max_idle_ns: 881590591483 ns
installing Xen timer for CPU 0
tsc: Unable to calibrate against PIT
tsc: No reference (HPET/PMTIMER) available
tsc: Detected 2992.504 MHz processor
Calibrating delay loop (skipped), value calculated using timer
frequency.. 5985.00 BogoMIPS (lpj=11970016)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context
switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 28K
cpu 0 spinlock event irq 1
smpboot: Max logical packages: 1
VPMU disabled by hypervisor.
Performance Events: unsupported p6 CPU model 23 no PMU driver, software
events only.
x86: Booted up 1 node, 1 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
futex hash table entries: 256 (order: 2, 16384 bytes)
xor: measuring software checksum speed
pIII_sse : 14399.000 MB/sec
prefetch64-sse: 17105.000 MB/sec
xor: using function: prefetch64-sse (17105.000 MB/sec)
NET: Registered protocol family 16
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
PCI: setting up Xen PCI frontend stub
raid6: mmxx1 gen() 3907 MB/s
raid6: mmxx2 gen() 4374 MB/s
raid6: sse1x1 gen() 2480 MB/s
raid6: sse1x2 gen() 3237 MB/s
raid6: sse2x1 gen() 3919 MB/s
raid6: sse2x1 xor() 5360 MB/s
raid6: sse2x2 gen() 3763 MB/s
raid6: sse2x2 xor() 6359 MB/s
raid6: int32x1 gen() 1170 MB/s
raid6: int32x1 xor() 735 MB/s
raid6: int32x2 gen() 1056 MB/s
raid6: int32x2 xor() 857 MB/s
random: fast init done
raid6: int32x4 gen() 975 MB/s
raid6: int32x4 xor() 817 MB/s
raid6: int32x8 gen() 928 MB/s
raid6: int32x8 xor() 721 MB/s
raid6: using algorithm mmxx2 gen() 4374 MB/s
raid6: using ssse3x1 recovery algorithm
ACPI: Interpreter disabled.
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: loaded
dmi: Firmware registration failed.
PCI: System does not support PCI
PCI: System does not support PCI
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
pnp: PnP ACPI: disabled
PnPBIOS: Disabled
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19888K
workingset: timestamp_bits=14 max_order=18 bucket_order=4
SGI XFS with ACLs, security attributes, realtime, no debug enabled
async_tx: api initialized (async)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
xen:xen_evtchn: Event-channel device installed
Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b229c2fa6c,
max_idle_ns: 440795288079 ns
Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15
(usb?)
brd: module loaded
genirq: Flags mismatch irq 6. 00000000 (floppy) vs. 0002cc00 (irqwork0)
floppy0: Unable to grab IRQ6 for the floppy driver
Invalid max_queues (4), will use default max: 1.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
hv_vmbus: registering driver hyperv_keyboard
mousedev: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised:
dm-devel at redhat.com
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
blkfront: xvda: flush diskcache: enabled; persistent grants: enabled;
indirect descriptors: enabled;
xvda: xvda1 xvda2 xvda3
xenbus_probe_frontend: Device with no driver: device/vif/0
hctosys: unable to open rtc device (rtc0)
Freeing unused kernel memory: 620K
Write protecting the kernel text: 5984k
Write protecting the kernel read-only data: 1508k
NX-protecting the kernel data: 4256k
Loading Input/USB/SCSI/SATA/PATA drivers ...
Creating busybox symlinks ...
Mounting proc ...
Mounting sys ...
Mounting devtmpfs on /dev ...
Executing "/sbin/udevd --daemon --resolve-names=never" ...
udevd[1125]: starting version 3.2.10
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
Executing "udevadm trigger --action=add --type=subsystems" ...
udevd[1126]: starting eudev-3.2.10
Executing "udevadm trigger --action=add --type=devices" ...
Executing "udevadm trigger --action=change --type=devices" ...
Executing "udevadm settle" ...
rootdev is /dev/xvda3.
EXT4-fs (xvda3): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (xvda3): mounted filesystem with ordered data mode. Opts: (null)
Executing switch_root and spawning init ...
INIT: version 2.99 booting
INIT: Entering runlevel: 2
* Running /etc/init.d/rc ...
* Switching from runlevel N to 2 ...
* Mounting virtual file systems: /run
[ OK ]
* Mounting virtual file systems: /proc
[ OK ]
* Mounting virtual file systems: /sys
[ OK ]
* Mounting virtual file systems: /dev
[ OK ]
* Loading kernel modules ...
apm: BIOS not found.
[ OK ]
* Populating /dev with device nodes...
udevd[1211]: starting version 3.2.10
urandom_read: 3 callbacks suppressed
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[1213]: starting eudev-3.2.10
input: PC Speaker as /devices/platform/pcspkr/input/input0
xen_netfront: Initialising Xen virtual ethernet driver
Error: Driver 'pcspkr' is already registered, aborting...
vif vif-0 enx00163e080808: renamed from eth0
[ OK ]
* Activating all swap files/partitions...
Adding 998396k swap on /dev/xvda2. Priority:-1 extents:1 across:998396k
SSFS [ OK ]
* Mounting root file system in read-only mode...
EXT4-fs (xvda3): re-mounted. Opts: errors=remount-ro
* Checking file systems...
fsck from util-linux 2.36.2
/dev/xvda3: clean, 29419/2555904 files, 463535/10210304 blocks
/dev/xvda1: clean, 37/25688 files, 39788/102400 blocks
[ OK ]
* Remounting root file system in read-write mode...
EXT4-fs (xvda3): re-mounted. Opts: errors=remount-ro
[ OK ]
* Mounting remaining file systems...
/proc : already mounted
/media/floppy : ignored
/media/cdrom : ignored
/dev/pts : successfully mounted
/sys : already mounted
/run : already mounted
/dev : already mounted
/boot : successfully mounted
none : ignored
/ : ignored
[ FAIL ]
* Setting up hostname ...
[ OK ]
* Setting console mode to Unicode (UTF-8)...
[ OK ]
* Configuring loopback and ethernet device ...
[ OK ]
* Starting usb ...
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[ OK ]
* Configuring ip on ethernet cards ...
[ OK ]
* Setting up additional routes ...
[ OK ]
* Setting up resolv.conf ...
[ OK ]
* Starting haveged ...
[ OK ]
* Starting syslogd ...
[ OK ]
* Starting Xinetd daemon ...
[ OK ]
* Stopping Xinetd daemon ...
[ OK ]
* Starting Xinetd daemon ...
[ OK ]
* Starting atd ...
[ OK ]
* Starting cron ...
[ OK ]
eisfair - Linux Kernel 4.9.255-eisfair-1-VIRT (hvc0).
Login as 'eis' for system setup
Login as 'root' for administration
eis32-40GB login:
hier ein ls -la /
eis32-40GB # ls -la /
total 234037
drwxr-xr-x 20 root root 4096 Sep 9 19:19 .
drwxr-xr-x 20 root root 4096 Sep 9 19:19 ..
-rw------- 1 root root 333 Dec 17 2018 .bash_history
-rw------- 1 root root 3170 Dec 17 2018 .viminfo
-rw-r--r-- 1 root root 168 Oct 12 2021 .wget-hsts
-rw-r--r-- 1 root root 1853808 Feb 15 2021
System.map-4.9.255-eisfair-1-VIRT
-rw-r--r-- 1 root root 2709655 Sep 1 23:55
System.map-5.15.64-eisfair-1-VIRT
drwxrwxr-x 2 root root 4096 Sep 10 00:38 bin
drwxr-xr-x 5 root root 1024 Sep 9 19:20 boot
-rw-r--r-- 1 root root 21852421 Apr 23 2020 boot.tgz
drwxr-xr-x 2 root root 4096 Dec 16 2018 data
drwxr-xr-x 11 root root 16020 Sep 10 13:08 dev
drwxr-xr-x 36 root root 4096 Sep 10 13:08 etc
drwxr-xr-x 3 root root 4096 Jun 13 2007 home
drwxr-xr-x 4 root root 4096 Sep 9 21:38 lib
drwx------ 2 root root 4096 Dec 16 2018 lost+found
drwxr-xr-x 5 root root 4096 Mar 3 2014 media
drwxr-xr-x 2 root root 4096 Dec 16 2018 mnt
dr-xr-xr-x 83 root root 0 Sep 10 13:07 proc
drwx------ 4 root root 4096 Sep 10 13:06 root
-rw-r--r-- 1 root root 213154080 Apr 23 2020 root.tgz
drwxrwxrwt 10 root root 420 Sep 10 13:08 run
drwxr-xr-x 2 root root 4096 Sep 9 21:58 sbin
dr-xr-xr-x 13 root root 0 Sep 10 13:08 sys
drwxrwxrwt 2 root root 4096 Sep 10 12:00 tmp
drwxr-xr-x 10 root root 4096 Jun 7 2021 usr
drwxr-xr-x 12 root root 4096 Apr 25 2018 var
eis32-40GB #
Gruß,
Helmut
Mehr Informationen über die Mailingliste Eisfair