[Eisfair] libXfixes.so.3

[Rolf Bensch]

Hallo Marcus,

Am 12.05.22 um 14:12 schrieb Marcus Röckrath:
> Hallo Rolf,
> 
> Holger Bruenjes wrote:
> 
>>> Test:
>>>
>>>      eis64-2 (/) # ls -l /usr/lib64/libXfixes.so.3.1.0
>>>      total 84
>>>      -rw-r--r-- 2 root root 83312 Apr  9 03:13 chcr.ko
>>>      eis64-2 (/) #
>>>
>>> Diese Ausgabe hätte ich jetzt nicht erwartet. Was läuft hier aus dem
>>> Ruder?
>>
>> hmm, keine Ahnung
> 
> Aber sehr merkwürdig. Dateisystemfehler?
> 
>> chcr.ko ist ein Kernelmodul
>>
>> Crypto Co-processor for Chelsio Terminator cards.
> 
> Und liegt ganz woanders:
> 
> eis64 # locate chcr
> /lib/modules/5.10.110-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko

eis64-2 (/) # locate chcr
[mehrere Verweise auf Dateien unterhalb von /home]
/lib/modules/4.9.248-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/4.9.255-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/4.9.261-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/5.10.102-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/5.10.110-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/5.10.31-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/5.10.84-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/5.10.90-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
/lib/modules/5.10.93-eisfair-64-VIRT/kernel/drivers/crypto/chelsio/chcr.ko
eis64-2 (/) #


> Also prüfen, ob die Platte ein Problem hat (Hardwareproblem).
> 
> smartctl -a /dev/sda

Hmmm, ergibt das bei einer virtuellen Platte Sinn? Smart-Support scheint 
verfügbar zu sein:

eis64-2 (/) # smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.110-eisfair-64-VIRT] 
(local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     QEMU HARDDISK
Serial Number:    QM00005
Firmware Version: 2.5+
User Capacity:    26,843,545,600 bytes [26.8 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
Local Time is:    Thu May 12 17:09:47 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine 
completed
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		(  288) seconds.
Offline data collection
capabilities: 			 (0x19) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE UPDATED 
WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x0003   100   100   006    Pre-fail Always 
       -       0
   3 Spin_Up_Time            0x0003   100   100   000    Pre-fail Always 
       -       16
   4 Start_Stop_Count        0x0002   100   100   020    Old_age Always 
      -       100
   5 Reallocated_Sector_Ct   0x0003   100   100   036    Pre-fail Always 
       -       0
   9 Power_On_Hours          0x0003   100   100   000    Pre-fail Always 
       -       1
  12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail Always 
       -       0
190 Airflow_Temperature_Cel 0x0003   069   069   050    Pre-fail  Always 
       -       31 (Min/Max 31/31)

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

eis64-2 (/) #
> 
> Mit
> 
> touch /forcefsck
> 
> und Reboot einen Dateisystemcheck beim Boot anstoßen.

fsck -A -y /dev/sda liefert keine Ausgabe. Das war vergangenen Montag 
noch anders :-(

Auch hier die Frage: wie bekomme ich das wieder in den Griff?

Grüße

Rolf