[Eisfair] kernel 4.9.261 stable

[Gerd Walter]

Am 31.03.21 um 22:53 schrieb Holger Bruenjes:
> Hallo Gerd
> 
> Am 31/03/2021 um 22.48 schrieb Gerd Walter:
> 
>> Damit startet der .261 bis "Booting the kernel."
>> und das wars.
> 
> ja, weil die UUID fehlt, dracut benoetigt die UUID
> 
> Holger

noch mal den .261 installiert und er will wieder als boot die Partition 
setzen.

Downloading required packages ...
=> [####################] linux-kernel-4.9.261-virt (3.0.6)...
Done!
Installation of: linux-kernel-4.9.261-virt (3.0.6) ...
Running under xen, ignoring missing /dev/disk/by-id ...
Verifying existing bootloader configuration ...
Extracting archive ...
Creating initramfs ...
Checking for sufficient disk space in /boot ...
Activating kernel kernel-4.9.261-eisfair-64-VIRT ...
Creating bootloader configuration ...
device /dev/xvda1 is not a physical disk,
not converting it to /dev/disk/by-id/.
Added eis  +  *
Added 4.9.261-VIRT  +
Added 4.9.255-VIRT  +

Note:
A new /etc/lilo.conf was written containing standard sections
according to a normal updated eisfair installation.

You will find your old boot configuration in /etc/lilo.conf.OLD.
You have to put your own boot options into /etc/lilo.conf manually
before you reboot.
Do not forget to run 'lilo' on the command line afterwards if you
changed /etc/lilo.conf!


Note:
A reboot is required to make the changes take effect.

Successfully installed: linux-kernel-4.9.261-virt (3.0.6)!
Press ENTER to continue




also boot Eintrag editiert und



eis 2.8.25 # lilo -v
LILO version 24.2.3 eisfair (released 03-May-2020)
   * Copyright (C) 1992-1998 Werner Almesberger  (until v20)
   * Copyright (C) 1999-2007 John Coffman  (until v22)
   * Copyright (C) 2009-2015 Joachim Wiedorn  (since v23)
This program comes with ABSOLUTELY NO WARRANTY. This is free software
distributed under the BSD License (3-clause). Details can be found in
the file COPYING, which is distributed with this software.

Reading boot sector from /dev/xvda
Using MENU secondary loader
Calling map_insert_data

Boot image: /boot/kernel -> kernel-4.9.261-eisfair-64-VIRT
Mapping RAM disk /boot/initrd.gz -> initrd-4.9.261-eisfair-64-VIRT.gz
The initial RAM disk will be loaded in the high memory above 16M.
Added eis  +  *

Boot image: /boot/kernel-4.9.261-eisfair-64-VIRT
Mapping RAM disk /boot/initrd-4.9.261-eisfair-64-VIRT.gz
The initial RAM disk will be loaded in the high memory above 16M.
Added 4.9.261-VIRT  +

Boot image: /boot/kernel-4.9.255-eisfair-64-VIRT
Mapping RAM disk /boot/initrd-4.9.255-eisfair-64-VIRT.gz
The initial RAM disk will be loaded in the high memory above 16M.
Added 4.9.255-VIRT  +

Writing boot sector.
/boot/boot.CA00 exists - no boot sector backup copy made.
eis 2.8.25 # reboot


und er startet wieder.

-- 
Gruß Gerd