[Eisfair] SANE mit scanbd oder scanbuttond

[Stefan Puschek]

Hallo Holger,

Am 13.02.21 um 15:54 schrieb Holger Bruenjes:
> Hallo Stefan
> 
> Am 13/02/2021 um 15.45 schrieb Stefan Puschek:
> 
>> und die Scannertasten muss ich auch noch wieder ans laufen kriegen
>> (machen eine Kopie desr Vorlage auf den Laserdrucker - also mein 
>> "Kopierer")

da ist etwas verstellt worden;

wie geschrieben: phpsane macht den am Server angeschlossenen Scanner im 
Browser verfügbar...

leider geht das nun nicht mehr:
No scanners were identified.
If you were expecting something different, check that the scanner is 
plugged in, turned on and detected by the sane-find-scanner tool (if 
appropriate).
Please read the documentation which came with this software (README, 
FAQ, manpages).

leider kann der user des Apachen (wwwrun) nicht scannen:
barbrady # whoami
wwwrun
barbrady # sane-find-scanner

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

   # No SCSI scanners found. If you expected something different, make 
sure that
   # you have loaded a kernel SCSI driver for your SCSI adapter.
   # Also you need support for SCSI Generic (sg) in your operating system.
   # If using Linux, try "modprobe sg".

could not open USB device 0x1d6b/0x0003 at 002:001: Access denied 
(insufficient permissions)
could not open USB device 0x04a9/0x220d at 001:002: Access denied 
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied 
(insufficient permissions)
   # No USB scanners found. If you expected something different, make 
sure that
   # you have loaded a kernel driver for your USB host controller and 
have setup
   # the USB system correctly. See man sane-usb for details.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary ports
   # can't be detected by this program.

   # You may want to run this program as root to find all devices. Once you
   # found the scanner devices, be sure to adjust access permissions as
   # necessary.
barbrady #

bisher ging das - wie kriege ich das wieder hin?


> scanbuttond kannst du wieder installieren

der war schon drauf - und nach einem reboot geht der auch wieder.

Groetjes
Stefan