[Eisfair] [eis 2.8.25] stürzt täglich ab / html2ps / gzip / libpq5 / netdate / ntp
Daniel Kubein
kuba_ at web.de
Di Aug 10 11:29:30 CEST 2021
Hallo Marcus,
>>>
>>> Was sagt ein
>>>
>>> smartctl -a /dev/device_der_platte (z. B. /dev/sda)
>>>
>>
>> eis 2.8.25 # smartctl -a /media/usb/sda1 -d
>
> Device der Platte nicht ein Partition.
>
> Der Option -d müsste noch ein Typ folgen, also erstmal ohne -d und wenn das
> nicht funktioniert, einen Typ angeben.
eis 2.8.25 # smartctl -a /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.55-eisfair-64-VIRT]
(local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST31000528AS
Serial Number: 9VP7YK4C
LU WWN Device Id: 5 000c50 020929bdb
Firmware Version: CC44
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Aug 10 11:26:53 2021 CEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 188) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 110 099 006 Pre-fail
Always - 25645867
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 96
5 Reallocated_Sector_Ct 0x0033 002 002 036 Pre-fail
Always FAILING_NOW 4032
7 Seek_Error_Rate 0x000f 062 059 030 Pre-fail
Always - 103126699646
9 Power_On_Hours 0x0032 080 080 000 Old_age
Always - 17693
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 96
183 Runtime_Bad_Block 0x0000 100 100 000 Old_age
Offline - 0
184 End-to-End_Error 0x0032 001 001 099 Old_age Always
FAILING_NOW 480
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 096 000 Old_age Always
- 66
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 051 041 045 Old_age Always
In_the_past 49 (Min/Max 27/50 #745)
194 Temperature_Celsius 0x0022 049 059 000 Old_age Always
- 49 (0 1 0 0 0)
195 Hardware_ECC_Recovered 0x001a 043 008 000 Old_age Always
- 25645867
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 17832 (180 36 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 3508303559
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 1041438801
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
und
eis 2.8.25 # smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.55-eisfair-64-VIRT]
(local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SSD PM871b M.2 2280 256GB
Serial Number: S3U0NY0K912297
LU WWN Device Id: 5 002538 d0084c120
Firmware Version: MVT23D0Q
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
TRIM Command: Available
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Aug 10 11:28:04 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age
Always - 11304
12 Power_Cycle_Count 0x0033 099 099 000 Pre-fail
Always - 722
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always
- 0
176 Erase_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always
- 0
177 Wear_Leveling_Count 0x0013 099 099 005 Pre-fail Always
- 3
178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always
- 0
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always
- 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always
- 620
181 Program_Fail_Cnt_Total 0x0033 100 100 010 Pre-fail Always
- 0
182 Erase_Fail_Count_Total 0x0033 100 100 010 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always
- 0
194 Temperature_Celsius 0x0033 053 044 000 Pre-fail Always
- 47
195 Hardware_ECC_Recovered 0x001b 200 200 000 Pre-fail Always
- 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always
- 0
238 Unknown_Attribute 0x0012 099 099 000 Old_age Always
- 99
241 Total_LBAs_Written 0x0033 099 099 000 Pre-fail Always
- 1665765738
242 Total_LBAs_Read 0x0033 099 099 000 Pre-fail Always
- 3388241506
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Offline Completed without error 00% 394
-
# 2 Short offline Aborted by host 90% 394
-
# 3 Short offline Aborted by host 80% 394
-
# 4 Short offline Aborted by host 90% 393
-
# 5 Short offline Aborted by host 90% 393
-
# 6 Short offline Aborted by host 90% 393
-
# 7 Short offline Aborted by host 90% 393
-
# 8 Short offline Completed without error 00% 393
-
# 9 Short offline Aborted by host 90% 393
-
#10 Short offline Aborted by host 10% 393
-
#11 Short offline Aborted by host 90% 393
-
#12 Short offline Aborted by host 90% 393
-
#13 Short offline Aborted by host 90% 393
-
#14 Short offline Aborted by host 90% 392
-
#15 Offline Completed without error 00% 391
-
#16 Short offline Aborted by host 70% 391
-
#17 Short offline Aborted by host 90% 388
-
#18 Short offline Aborted by host 90% 388
-
#19 Offline Completed without error 00% 388
-
#20 Offline Completed without error 00% 387
-
#21 Short offline Aborted by host 90% 387
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Gruß Daniel
Mehr Informationen über die Mailingliste Eisfair