[Eisfair] Aw?==?utf-8?Q?: Re: Aw: Re: Aw: Re: Fehl?==?utf-8?Q?er beim Update eine E-1 PAE
dark06 at gmx.de
dark06 at gmx.de
So Apr 11 21:00:37 CEST 2021
Hallo Marcus,
hier ist der gekürzte smartctl Auszug der alten Platte
root at Microknoppix:/home/knoppix# smartctl -x /dev/sde
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.10-64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.9
Device Model: ST3802110ACE
Serial Number: 5LR2EVN3
Firmware Version: 3.ACB
User Capacity: 80.026.361.856 bytes [80,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Sun Apr 11 18:28:19 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection
activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15556) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before
entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 112 082 006 - 88321102
3 Spin_Up_Time PO---- 096 092 000 - 0
4 Start_Stop_Count -O--CK 097 097 020 - 3123
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 080 060 030 - 106845386
9 Power_On_Hours -O--CK 061 061 000 - 34436
10 Spin_Retry_Count PO--C- 100 099 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 413
187 Reported_Uncorrect -O--CK 058 058 000 - 42
189 High_Fly_Writes -O-RCK 096 096 000 - 4
190 Airflow_Temperature_Cel -O---K 072 049 045 - 28 (Min/Max
26/28)
194 Temperature_Celsius -O---K 028 051 000 - 28 (0 16 0
0 0)
195 Hardware_ECC_Recovered -O-RC- 083 043 000 - 88321102
197 Current_Pending_Sector -O--C- 100 100 000 - 5
198 Offline_Uncorrectable ----C- 100 100 000 - 5
199 UDMA_CRC_Error_Count -OSRCK 200 198 000 - 2
200 Multi_Zone_Error_Rate ------ 100 253 000 - 0
202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 1 Device vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL,SL VS 101 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
0xff GPL - 23552 Reserved
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 45 (device log contains only the most recent 20
errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45 [4] occurred at disk power-on lifetime: 34436 hours (1434 days
+ 20 hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 07 01 01 83 49 01 49 e1 00 Error: UNC 7 sectors at LBA =
0x10183490149 = 1106009194825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time
Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- ---------------
--------------------
c8 00 00 00 07 00 01 83 00 01 49 e1 00 04:49:59.337 READ DMA
c8 00 00 00 01 00 01 83 00 01 48 e1 00 04:49:59.337 READ DMA
c8 00 00 00 02 00 01 83 00 01 46 e1 00 04:49:59.337 READ DMA
c8 00 00 00 05 00 01 83 00 01 41 e1 00 04:49:59.337 READ DMA
c8 00 00 00 01 00 01 83 00 01 40 e1 00 04:49:59.337 READ DMA
45 Fehler stehen drin.
Werde die Platte mal in einen Windows Rechner stecken und die Seatools
laufen lassen. Mal sehen was dabei raus kommt.
Danach erst mit Swap starten. Wenn das dann immer noch nicht geht ohne
Swap.
VG
Frank
Mehr Informationen über die Mailingliste Eisfair