[Eisfair] SMTP error 530 Authentication required bei Versand nur mit Emailadresse
Rene Hanke
Rene.Hanke at gmx.net
Do Jul 30 12:08:33 CEST 2020
Hallo Marcus,
Am 28.07.2020 um 20:31 schrieb Marcus Röckrath:
>
> Ich würde gerne mal die komplette SMTP-Sektion der Mail-Konfiguration sehen.
Bitteschön. Passwörter sind ersetzt, die Nutzer, die nicht ich bin,
unkenntlich gemacht.
Genutzt wird derzeit aber nur der Account rhanke / Rene.Hanke at gmx.net.
- - - - - - - - - - -
#------------------------------------------------------------------------------
# smtp: general settings
#------------------------------------------------------------------------------
START_SMTP='yes' # start SMTP server: yes or no
SMTP_QUALIFY_DOMAIN='home.lan' # domain to be added to all unqualified
# addresses
SMTP_HOSTNAME='frox.home.lan' # canonical hostname of eisfair server
SMTP_QUEUE_INTERVAL='30' # queueing interval in minutes, usually 30
SMTP_QUEUE_OUTBOUND_MAIL='no' # set to yes if you are using a dialup ISP
# and you want to queue outbound mail
until
# next queue run which must be initiated
# manually or by a cron-job
SMTP_QUEUE_ACCEPT_PER_CONNECTION='10'
# msg number to accept in one smtp
session
SMTP_LISTEN_PORT='' # one or more port(s), separated by
# whitespace on
# which Exim is listening for inbound
traffic.
SMTP_MAIL_TO_UNKNOWN_USERS='bounce'
# how to handle mail to unknown mail
users:
# bounce, copy or forward, default is
'bounce'
SMTP_ALLOW_EXIM_FILTERS='yes' # allow exim filters in .forward file:
yes or
# no
SMTP_CHECK_RECIPIENTS='' # check that not more than the given
number
# of
# recipients per mail are addressed
at once.
# Default is being set to 100
SMTP_CHECK_SPOOL_SPACE='' # check if enough disk space for spool
# directory
# is available. Default is being set
to 10Mb
SMTP_CHECK_SPOOL_INODES='' # check if enough inodes for spool
directory
# are available. Default is being set
to 100
SMTP_LIMIT='' # mail size limit. Default is being set to
# 50Mb
SMTP_REMOVE_RECEIPT_REQUEST='no' # remove external receipt request: yes
or no
SMTP_SERVER_TRANSPORT='default' # transport to use: default, tls or both
SMTP_IDENT_CALLBACKS='no' # enable ident callbacks: yes or no
SMTP_SERVER_TLS_ADVERTISE_HOSTS=''
# advertise STARTLS to these hosts, to
# disable
# this feature set to '' (required
for tls!)
SMTP_SERVER_TLS_VERIFY_HOSTS='' # verify tls certs of these hosts, to
disable
# this feature set to ''
SMTP_SERVER_TLS_TRY_VERIFY_HOSTS=''
# try to verify tls certs of these
hosts, to
# disable this feature set to ''
SMTP_SERVER_SSMTP='no' # start SSMTP server: yes or no
SMTP_SERVER_SSMTP_LISTEN_PORT='' # port on which Exim is listening for
inbound
# traffic, default is 'ssmtp'
#------------------------------------------------------------------------------
# smtp: local domains
#------------------------------------------------------------------------------
SMTP_LOCAL_DOMAIN_N='3' # number of local domains
SMTP_LOCAL_DOMAIN_1='@' # 1. local domain, @ means SMTP_HOSTNAME
SMTP_LOCAL_DOMAIN_2='localhost' # 2. local domain
SMTP_LOCAL_DOMAIN_3='home.lan' # 3. local domain
#------------------------------------------------------------------------------
# smtp: relay to domains
#
# Optional:
# The folllowing setting specify domains for which your host is an
incoming
# relay. If you are not doing any relaying, you should leave the list
empty.
# However, if your host is an MX backup or gateway of some kind for some
# domains, you must set SMTP_RELAY_TO_DOMAIN_x to match those domains.
#------------------------------------------------------------------------------
SMTP_RELAY_TO_DOMAIN_N='0' # domains for which we are incoming relay
SMTP_RELAY_TO_DOMAIN_1='domain.de'
#------------------------------------------------------------------------------
# smtp: relay from hosts
#
# The following settings specify hosts that can use your host as an
# outgoing relay to any other host on the Internet. Such a setting
# commonly refers to a complete local network as well as the localhost.
#------------------------------------------------------------------------------
SMTP_RELAY_FROM_HOST_N='2' # hosts/nets from we accept outgoing mails
SMTP_RELAY_FROM_HOST_1='127.0.0.1'
SMTP_RELAY_FROM_HOST_2='192.168.1.0/24'
#------------------------------------------------------------------------------
# smtp: server authentication
#
# Optional:
# Set the type of server authentication.
# none - no authentication
# user - each user authenticates himself by his username/password
# server - all users authenticate themself by sending a global user/pass
#------------------------------------------------------------------------------
SMTP_AUTH_TYPE='user' # authentication: none, user, server,
# user_light or server_light
SMTP_AUTH_USER='' # if server: global username, else empty
SMTP_AUTH_PASS='' # if server: global password, else empty
#------------------------------------------------------------------------------
# smtp: smarthosts
#
# Optional:
# Send all outgoing messages to a smarthost (e.g. mail server of your
isp).
#------------------------------------------------------------------------------
SMTP_SMARTHOST_ONE_FOR_ALL='no' # use one smarthost for all accounts:
# if 'yes', the first entry will be read
# if 'no', user specific entries will
be used
SMTP_SMARTHOST_DOMAINS='' # if SMTP_SMARTHOST_ONE_FOR_ALL='yes' then
# use it only for these domains
(separated by ':')
SMTP_SMARTHOST_ROUTE_TYPE='addr' # if SMTP_SMARTHOST_ONE_FOR_ALL='no'
then how
# to select smarthost: by sender
mail 'addr'essi
# or destination 'domain'
SMTP_SMARTHOST_N='6' # number of smarthost entries
SMTP_SMARTHOST_1_HOST='mail.gmx.net'
# 1. smart host to send mail to, e.g.
# mail.gmx.net
SMTP_SMARTHOST_1_AUTH_TYPE='plain'
# 'none', 'plain', 'login', 'md5'
or 'msn'
SMTP_SMARTHOST_1_ADDR='Rene.Hanke at gmx.net'
# if SMTP_SMARTHOST_ROUTE_TYPE='addr':
# sender mail address
SMTP_SMARTHOST_1_DOMAIN='local.lan'
# if
SMTP_SMARTHOST_ROUTE_TYPE='domain':
# destination domain
SMTP_SMARTHOST_1_USER='Rene.Hanke at gmx.net'
# if authentication required: username
SMTP_SMARTHOST_1_PASS='[MEINPASSWORT]' # if authentication required:
password
SMTP_SMARTHOST_1_FORCE_AUTH='no' # set to 'yes' to allow only
authenticated
# connections
SMTP_SMARTHOST_1_FORCE_TLS='yes' # set to 'yes' to allow only secure
# connections
SMTP_SMARTHOST_1_PORT='587' # port to use for outgoing connections,
# default is 'smtp'
#------------------------------------------------------------------------------
SMTP_SMARTHOST_2_HOST='smtp.web.de'
# 2. smart host to send mail to, e.g.
# mail.gmx.net
SMTP_SMARTHOST_2_AUTH_TYPE='login'
# 'none', 'plain', 'login', 'md5'
or 'msn'
SMTP_SMARTHOST_2_ADDR='ReneHanke at web.de'
# if SMTP_SMARTHOST_ROUTE_TYPE='addr':
# sender mail address
SMTP_SMARTHOST_2_DOMAIN='local.lan'
# if
SMTP_SMARTHOST_ROUTE_TYPE='domain':
# destination domain
SMTP_SMARTHOST_2_USER='ReneHanke at web.de'
# if authentication required: username
SMTP_SMARTHOST_2_PASS='[MEINPASSWORT]' # if authentication required:
password
SMTP_SMARTHOST_2_FORCE_AUTH='no' # set to 'yes' to allow only
authenticated
# connections
SMTP_SMARTHOST_2_FORCE_TLS='yes' # set to 'yes' to allow only secure
# connections
SMTP_SMARTHOST_2_PORT='587' # port to use for outgoing connections,
# default is 'smtp'
#------------------------------------------------------------------------------
SMTP_SMARTHOST_3_HOST='smtp.web.de'
# 3. smart host to send mail to, e.g.
# mail.gmx.net
SMTP_SMARTHOST_3_AUTH_TYPE='login'
# 'none', 'plain', 'login', 'md5'
or 'msn'
SMTP_SMARTHOST_3_ADDR='GEHEIM1 at web.de'
# if SMTP_SMARTHOST_ROUTE_TYPE='addr':
# sender mail address
SMTP_SMARTHOST_3_DOMAIN='local.lan'
# if
SMTP_SMARTHOST_ROUTE_TYPE='domain':
# destination domain
SMTP_SMARTHOST_3_USER='GEHEIM1 at web.de'
# if authentication required: username
SMTP_SMARTHOST_3_PASS='[MEINPASSWORT]'
# if authentication required: password
SMTP_SMARTHOST_3_FORCE_AUTH='no' # set to 'yes' to allow only
authenticated
# connections
SMTP_SMARTHOST_3_FORCE_TLS='yes' # set to 'yes' to allow only secure
# connections
SMTP_SMARTHOST_3_PORT='587' # port to use for outgoing connections,
# default is 'smtp'
#------------------------------------------------------------------------------
SMTP_SMARTHOST_4_HOST='mail.gmx.net'
# 4. smart host to send mail to, e.g.
# mail.gmx.net
SMTP_SMARTHOST_4_AUTH_TYPE='plain'
# 'none', 'plain', 'login', 'md5'
or 'msn'
SMTP_SMARTHOST_4_ADDR='CompuTecS at gmx.net'
# if SMTP_SMARTHOST_ROUTE_TYPE='addr':
# sender mail address
SMTP_SMARTHOST_4_DOMAIN='local.lan'
# if
SMTP_SMARTHOST_ROUTE_TYPE='domain':
# destination domain
SMTP_SMARTHOST_4_USER='CompuTecS at gmx.net'
# if authentication required: username
SMTP_SMARTHOST_4_PASS='[MEINPASSWORT]'
# if authentication required: password
SMTP_SMARTHOST_4_FORCE_AUTH='no' # set to 'yes' to allow only
authenticated
# connections
SMTP_SMARTHOST_4_FORCE_TLS='yes' # set to 'yes' to allow only secure
# connections
SMTP_SMARTHOST_4_PORT='587' # port to use for outgoing connections,
# default is 'smtp'
#------------------------------------------------------------------------------
SMTP_SMARTHOST_5_HOST='mail.gmx.net'
# 5. smart host to send mail to, e.g.
# mail.gmx.net
SMTP_SMARTHOST_5_AUTH_TYPE='plain'
# 'none', 'plain', 'login', 'md5'
or 'msn'
SMTP_SMARTHOST_5_ADDR='GEHEIM2 at gmx.de'
# if SMTP_SMARTHOST_ROUTE_TYPE='addr':
# sender mail address
SMTP_SMARTHOST_5_DOMAIN='local.lan'
# if
SMTP_SMARTHOST_ROUTE_TYPE='domain':
# destination domain
SMTP_SMARTHOST_5_USER='GEHEIM2 at gmx.de'
# if authentication required: username
SMTP_SMARTHOST_5_PASS='[MEINPASSWORT]'
# if authentication required: password
SMTP_SMARTHOST_5_FORCE_AUTH='no' # set to 'yes' to allow only
authenticated
# connections
SMTP_SMARTHOST_5_FORCE_TLS='yes' # set to 'yes' to allow only secure
# connections
SMTP_SMARTHOST_5_PORT='587' # port to use for outgoing connections,
# default is 'smtp'
#------------------------------------------------------------------------------
SMTP_SMARTHOST_6_HOST='smtp.web.de'
# 6. smart host to send mail to, e.g.
# mail.gmx.net
SMTP_SMARTHOST_6_AUTH_TYPE='login'
# 'none', 'plain', 'login', 'md5'
or 'msn'
SMTP_SMARTHOST_6_ADDR='GEHEIM2 at web.de'
# if SMTP_SMARTHOST_ROUTE_TYPE='addr':
# sender mail address
SMTP_SMARTHOST_6_DOMAIN='local.lan'
# if
SMTP_SMARTHOST_ROUTE_TYPE='domain':
# destination domain
SMTP_SMARTHOST_6_USER='GEHEIM2 at web.de'
# if authentication required: username
SMTP_SMARTHOST_6_PASS='[MEINPASSWORT]' # if authentication required:
password
SMTP_SMARTHOST_6_FORCE_AUTH='no' # set to 'yes' to allow only
authenticated
# connections
SMTP_SMARTHOST_6_FORCE_TLS='yes' # set to 'yes' to allow only secure
# connections
SMTP_SMARTHOST_6_PORT='587' # port to use for outgoing connections,
# default is 'smtp'
#------------------------------------------------------------------------------
# smtp: update ignore hosts file
#------------------------------------------------------------------------------
SMTP_UPDATE_IGNORE_HOSTS='no' # update ignore hosts: yes or no
SMTP_UPDATE_IGNORE_HOSTS_CRON_SCHEDULE='5 1 * * 0'
# cron configuration string
#------------------------------------------------------------------------------
# smtp: aliases
#
# Here you can specify aliases
#
# General format:
# SMTP_ALIASES_x_ALIAS_y='name: user1[,user2,...]
#
# Example:
# SMTP_ALIASES_N='2'
# ...
# SMTP_ALIASES_2_DOMAIN='2nd.local.lan'
# SMTP_ALIASES_2_ALIAS_N='1'
# SMTP_ALIASES_2_ALIAS_1='frank: fm,foo at otherwhere.com'
#
# Mails to frank at domain.de will be delivered to local user fm and to
# user foo at otherwhere.com.
#------------------------------------------------------------------------------
SMTP_ALIASES_N='1' # number of domains: default: 1
SMTP_ALIASES_1_DOMAIN='' # 1. domain name: will only be read if
# SMTP_ALIASES_N > 1
# and not SMTP_ALIASES_1_DOMAIN
SMTP_ALIASES_1_ALIAS_N='2' # number of aliases
SMTP_ALIASES_1_ALIAS_1='root: rhanke'
# 1. alias must be for user 'root'!
SMTP_ALIASES_1_ALIAS_2='faxusers: rhanke,GEHEIM3'
# 2. alias
#------------------------------------------------------------------------------
# smtp: outgoing addresses
#
# Here you can specify an address translation table which is only available
# if SMTP_SMARTHOST_N has been set to a value greater than 0.
#
# General format:
# SMTP_OUTGOING_ADDRESSES_x='name: email address'
#
# Example:
# SMTP_OUTGOING_ADDRESSES_1='fm: frank at domain.de'
#
# Mail from local user 'fm' will be delivered by using sender address
# 'frank at domain.de'.
#------------------------------------------------------------------------------
SMTP_OUTGOING_ADDRESSES_N='6'
SMTP_OUTGOING_ADDRESSES_1='rhanke: Rene.Hanke at gmx.net'
SMTP_OUTGOING_ADDRESSES_2='root: Rene.Hanke at gmx.net'
SMTP_OUTGOING_ADDRESSES_3='hanker: ReneHanke at web.de'
SMTP_OUTGOING_ADDRESSES_4='GEHEIM3: GEHEIM2 at web.de'
SMTP_OUTGOING_ADDRESSES_5='wwwrun: Rene.Hanke at gmx.net'
SMTP_OUTGOING_ADDRESSES_6='computecs: CompuTecS at gmx.net'
#------------------------------------------------------------------------------
# smtp: incoming addresses
#
# Example:
# SMTP_HEADER_REWRITE_1_SOURCE='*@home.lan'
# SMTP_HEADER_REWRITE_1_DESTINATION='$1 at domain.de'
# SMTP_HEADER_REWRITE_1_FLAGS='sF'
#
# The envelope from address and the sender of an incoming smtp mail from
# user 'frank at home.lan' will be rewritten to 'frank at domain.de'
#------------------------------------------------------------------------------
SMTP_HEADER_REWRITE_N='6' # number of rewrite rules
SMTP_HEADER_REWRITE_1_SOURCE='rhanke at home.lan'
# 1. search mask
SMTP_HEADER_REWRITE_1_DESTINATION='Rene.Hanke at gmx.net'
# replace string
SMTP_HEADER_REWRITE_1_FLAGS='sF' # what to rewrite
SMTP_HEADER_REWRITE_2_SOURCE='root at home.lan'
# 2. search mask
SMTP_HEADER_REWRITE_2_DESTINATION='Rene.Hanke at gmx.net'
# replace string
SMTP_HEADER_REWRITE_2_FLAGS='sF' # what to rewrite
SMTP_HEADER_REWRITE_3_SOURCE='hanker at home.lan'
# 3. search mask
SMTP_HEADER_REWRITE_3_DESTINATION='ReneHanke at web.de'
# replace string
SMTP_HEADER_REWRITE_3_FLAGS='sF' # what to rewrite
SMTP_HEADER_REWRITE_4_SOURCE='GEHEIM3 at home.lan'
# 4. search mask
SMTP_HEADER_REWRITE_4_DESTINATION='GEHEIM3 at web.de'
# replace string
SMTP_HEADER_REWRITE_4_FLAGS='sF' # what to rewrite
SMTP_HEADER_REWRITE_5_SOURCE='wwwrun at home.lan'
# 5. search mask
SMTP_HEADER_REWRITE_5_DESTINATION='Rene.Hanke at gmx.net'
# replace string
SMTP_HEADER_REWRITE_5_FLAGS='sF' # what to rewrite
SMTP_HEADER_REWRITE_6_SOURCE='computecs at home.lan'
# 6. search mask
SMTP_HEADER_REWRITE_6_DESTINATION='CompuTecS at gmx.net'
# replace string
SMTP_HEADER_REWRITE_6_FLAGS='sF' # what to rewrite
#------------------------------------------------------------------------------
# smtp: mailing lists
#
# Here you can specify simple mailing lists
#
# Explanation of example below:
#
# A mail to 'eisfair at domain.de' will be delivered to all members in the
list.
# The reply address will be changed to 'eisfair at domain.de'!
#------------------------------------------------------------------------------
SMTP_LIST_DOMAIN='home.lan' # domain part of mailing list addrs
SMTP_LIST_ERRORS='frank at home.lan' # send error messages to this address
SMTP_LIST_N='0' # number of mailing lists
SMTP_LIST_1_ACTIVE='no' # 1. activate list: yes or no
SMTP_LIST_1_NAME='eisfair' # name of list
SMTP_LIST_1_USER_N='2' # number of list members
SMTP_LIST_1_USER_1='frank at home.lan'
# 1. member
SMTP_LIST_1_USER_2='tom at home.lan' # 2. member
#------------------------------------------------------------------------------
SMTP_LIST_2_ACTIVE='no' # 2. activate list: yes or no
SMTP_LIST_2_NAME='fli4l' # name of list
SMTP_LIST_2_USER_N='2' # number of list members
SMTP_LIST_2_USER_1='frank at home.lan'
# 1. member
SMTP_LIST_2_USER_2='joe at home.lan' # 2. member
- - - - - - - - - - -
> Mit welcher Absenderadresse wird aus dem Mailclient versendet?
>
> rene.hanke@????
>
> rene@????
Rene.Hanke at gmx.net bzw. rene.hanke at gmx.net . Eines ist roundcube, eines
BlueMail (Android), beide zeigen sporadisch denselben Fehler.
[SNIP]
> $sender_address_local_part}}lsearch{/etc/exim-addresses}{$value}}}'
>> 18665 search_open: lsearch "/etc/exim-addresses"
>> 18665 search_find: file="/etc/exim-addresses"
>> 18665 key="rene.hanke" partial=-1 affix=NULL starflags=0 opts=NULL
>> 18665 LRU list:
>> 18665 5/etc/exim-addresses
>> 18665 End
>> 18665 internal_search_find: file="/etc/exim-addresses"
>> 18665 type=lsearch key="rene.hanke" opts=NULL
>> 18665 file lookup required for rene.hanke
>> 18665 in /etc/exim-addresses
>> 18665 lookup failed
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
>> 18665 direct command after expansion:
>> 18665 argv[0] = /usr/bin/exim_transport_filter.sh
>> 18665 argv[1] = --both
>> 18665 argv[2] = home.lan
>> 18665 argv[3] =
>> 18665 SMTP>> MAIL FROM:<Rene.Hanke at gmx.net> SIZE=608
>> 18665 cmd buf flush 41 bytes
>> 18665 tls_write(0x8247728, 41)
>> 18665 SSL_write(0x824f190, 0x8247728, 41)
>> 18665 outbytes=41 error=0
>> 18665 Calling SSL_read(0x824f190, 0x8246728, 4096)
>> 18665 read response data: size=29
>> 18665 SMTP<< 530 Authentication required
>
> IMHO verbirgt sich in dem Abschnitt das Problem.
>
Bömische Dörfer meinerseits. ¯\_(ツ)_/¯
Lieber Gruß, sollte ich die kommende Woche nicht antworten bitte nicht
wundern. ;-)
René
Mehr Informationen über die Mailingliste Eisfair