[Eisfair] smart via usb. Eine geht, die andere nicht.

[Kay Martinen]

Am 15.01.2020 um 23:06 schrieb Holger Bruenjes:
> 
> Am 15/01/2020 um 23.01 schrieb Kay Martinen:
> 
>> Was kann ich da tun?
> 
> hilft sdparm da weiter?

> 
> file # sdparm /dev/sde
>     /dev/sde: Intenso  External USB 3.0  5438
> 10 byte MODE SENSE cdb not supported, try again with '-6' option
> file # sdparm -6 /dev/sde
>     /dev/sde: Intenso  External USB 3.0  5438
> Read write error recovery mode page:
>   AWRE          1  [cha: y, def:  1, sav:  1]
>   ARRE          0  [cha: n, def:  0, sav:  0]
>   PER           0  [cha: n, def:  0, sav:  0]
> 6 byte MODE SENSE cdb not supported, try again without '-6' option

Scheinbar nicht wirklich. Zum vergleich:

> file # sdparm /dev/sdf
>     /dev/sdf: Hitachi   HUA722020ALA331
> Write parameters (MMC) mode page:
>   BUFE          1  [cha: y, def:  1, sav:  1]
> file # sdparm -6 /dev/sdf
>     /dev/sdf: Hitachi   HUA722020ALA331

und mit -v bei der USB 3.0 Platte

> file # sdparm -v -6 /dev/sde
>     /dev/sde: Intenso  External USB 3.0  5438
> Read write error recovery [0x1] mode page [PS=0]:
>   AWRE          1  [cha: y, def:  1, sav:  1]
>   ARRE          0  [cha: n, def:  0, sav:  0]
>   PER           0  [cha: n, def:  0, sav:  0]
> 6 byte MODE SENSE cdb not supported, try again without '-6' option

Dagegen bei der Hitachi

> file # sdparm -v -6 /dev/sdf
>     /dev/sdf: Hitachi   HUA722020ALA331
>>> Read write error recovery mode page [0x1] not found
>>> Disconnect-reconnect (SPC + transports) mode page [0x2] not found
>>> Format (SBC) mode page [0x3] not found
>>> Rigid disk (SBC) mode page [0x4] not found
>>> Write parameters (MMC) mode page [0x5] not found
>>> RBC device parameters (RBC) mode page [0x6] not found
>>> Verify error recovery (SBC) mode page [0x7] not found
>>> Caching (SBC) mode page [0x8] not found
>>> Control mode page [0xa] not found
>>> Control extension mode subpage [0xa,0x1] not found
>>> Application tag (SBC) mode subpage [0xa,0x2] failed
>>> Command duration limit A mode subpage [0xa,0x3] failed
>>> Command duration limit B mode subpage [0xa,0x4] failed
>>> IO advice hints grouping mode subpage [0xa,0x5] failed
>>> Background operation control (SBC) mode subpage [0xa,0x6] not found
>>> Control data protection (SSC) mode subpage [0xa,0xf0] not found
>>> SAT pATA control mode subpage [0xa,0xf1] not found
>>> Power condition - old version mode page [0xd] not found
>>> Data compression (SSC) mode page [0xf] not found
>>> XOR control (SBC) mode page [0x10] not found
>>> Device configuration extension (SSC) mode subpage [0x10,0x1] not found
>>> Medium partition (SSC) mode page [0x11] failed
>>> Enclosure services management (SES) mode page [0x14] not found
>>> Protocol specific logical unit mode page [0x18] not found
>>> Protocol specific port mode page [0x19] not found
>>> Power condition mode page [0x1a] not found
>>> Power consumption mode subpage [0x1a,0x1] not found
>>> SAT ATA Power condition mode subpage [0x1a,0xf1] not found
>>> Informational exceptions control mode page [0x1c] failed
>>> Background control (SBC) mode subpage [0x1c,0x1] failed
>>> Logical block provisioning (SBC) mode subpage [0x1c,0x2] failed
>>> Element address assignment (SMC) mode page [0x1d] not found
>>> Transport geometry parameters (SMC) mode page [0x1e] failed
>>> Device capabilities (SMC) mode page [0x1f] not found
>>> Extended device capabilities (SMC) mode subpage [0x1f,0x41] not found
>>> CD/DVD (MM) capabilities and mechanical status (MMC) mode page [0x2a] not found

Boff. So viel Text, so wenig hilfreiches... für mich. Mit mode pages 
habe ich nie gespielt.

Kay

-- 
Sent via SN (Eisfair-1)