[Eisfair] [E64] Lilo: Fatal: raid_setup: stat.... bei Kernel-Update
Rolf Bensch
azubi at bensch-net.de
So Apr 12 16:15:47 CEST 2020
Hallo zusammen,
beim Versuch einen neuen Kernel zu installieren erhalte ich folgende
Fehlermeldung:
Installation of: eiskernel-virt (4.10.0) ...
Your lilo configuration is broken!
This is the output from the test with 'lilo -t':
Fatal: raid_setup: stat("/dev/disk/by-id/ata-QEMU_HARDDISK_QM00005")
Jetzt ist mir etwas mulmig im Bauch das frisch installierte (und gut
laufende) System zu zerschießen. Der virtualisierte E64 bootet normal.
Gemäß /var/log/messages wird folgendes gestartet:
Command line: auto BOOT_IMAGE=eis ro
root=UUID=f56aa824-ea3f-4c53-a52d-dfab977218e0 raid=noautodetect
Meine Diagnosen:
eis64-2 # lilo -t -v3
LILO version 24.2.2 (test mode)
(released 29-July-2019)
* Copyright (C) 1992-1998 Werner Almesberger (until v20)
* Copyright (C) 1999-2007 John Coffman (until v22)
* Copyright (C) 2009-2015 Joachim Wiedorn (since v23)
This program comes with ABSOLUTELY NO WARRANTY. This is free software
distributed under the BSD License (3-clause). Details can be found in
the file COPYING, which is distributed with this software.
Running Linux kernel 4.9.215-eisfair-64-VIRT on x86_64
device-mapper major = 252
Fatal: raid_setup: stat("/dev/disk/by-id/ata-QEMU_HARDDISK_QM00005")
eis64-2 # df -h /boot
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 89M 40M 43M 49% /boot
/etc/lilo.conf:
lba32
#boot = /dev/sda
boot = /dev/disk/by-id/ata-QEMU_HARDDISK_QM00005
read-only
prompt
timeout = 50
vga = normal
menu-scheme = wr:bw:wr:Yr
image = /boot/kernel
#root = /dev/sda3
root = "UUID=f56aa824-ea3f-4c53-a52d-dfab977218e0"
label = eis
initrd = /boot/initrd.gz
append = "raid=noautodetect"
image = /boot/old-kernel
#root = /dev/sda3
root = "UUID=f56aa824-ea3f-4c53-a52d-dfab977218e0"
label = oldeis
initrd = /boot/old-initrd.gz
append = "raid=noautodetect"
image = /boot/kernel-4.9.210-VIRT
#root = /dev/sda3
root = "UUID=f56aa824-ea3f-4c53-a52d-dfab977218e0"
label = 4.9.210-VIRT
initrd = /boot/initrd-4.9.210-VIRT.gz
append = "raid=noautodetect"
eis64-2 # fdisk -l
...
Disk /dev/sda: 60 GiB, 64424509440 bytes, 125829120 sectors
Disk model: QEMU HARDDISK
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 66AB51DF-9D46-4D65-A379-6D8079F5B443
Device Start End Sectors Size Type
/dev/sda1 2048 198655 196608 96M Linux filesystem
/dev/sda2 198656 460799 262144 128M Linux swap
/dev/sda3 460800 125827071 125366272 59.8G Linux filesystem
eis64-2 # mount | grep boot
/dev/sda1 on /boot type ext4 (rw,relatime,errors=remount-ro,data=ordered)
Was stimmt hier nicht und wie bekomme ich das hingebogen?
Grüße Rolf
Mehr Informationen über die Mailingliste Eisfair