[Eisfair] Mailserver?==?utf-8?Q? auf Eisfair - Probleme mit ?==?utf-8?Q?Thunderbird
Manfred Singer
manesinger at web.de
Di Jun 5 17:09:10 CEST 2018
Hallo,
habe jetzt Opera genommen. Das Problem ist nur, daß er sich nicht
einloggen kann. Im Anhang hier mal meine Konfig:
#-----------------------------------------------------------------------
-------
# /etc/config.d/mail - configuration for mail services on EIS/FAIR
#
# Copyright (c) 2002-2018 The Eisfair Team, team(at)eisfair(dot)org
#
# Creation: 2002-04-28 fm
# Last Update: $Id: mail 48790 2018-01-14 16:38:09Z jed $
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#-----------------------------------------------------------------------
-------
START_MAIL='yes' # enable mail package: yes or no
#-----------------------------------------------------------------------
-------
# pop3/imap: general settings
#-----------------------------------------------------------------------
-------
START_POP3='yes' # start POP3 server: yes or no
START_IMAP='yes' # start IMAP server: yes or no
POP3IMAP_CREATE_MBX='yes' # create mbx mailbox for imap
POP3IMAP_TRANSPORT='default' # transport to use: default, tls
or both
POP3IMAP_IDENT_CALLBACKS='yes' # enable ident callbacks: yes or
no
#-----------------------------------------------------------------------
-------
# pop3/imap: mail users and optional passwords
#-----------------------------------------------------------------------
-------
MAIL_USER_USE_MAILONLY_PASSWORDS='no' # use seperate mail passwords:
yes or no
MAIL_USER_N='1' # number of mail-accounts
MAIL_USER_1_ACTIVE='yes' # 1. activate account: yes or no
MAIL_USER_1_USER='heinz' # username
MAIL_USER_1_PASS='katmandu' # optional mail only password
#-----------------------------------------------------------------------
-------
# imap: shared and public folders
#
# Optional:
# Setup public or shared imap folders. This feature is not supported
by
# some mail clients, but has succesfully tested with netscape
messenger.
#-----------------------------------------------------------------------
-------
IMAP_SHARED_PUBLIC_USERGROUP='' # name of usergroup for shared
and
# public folders - default:
users
IMAP_SHARED_FOLDER_N='0' # number of shared folders to
create
IMAP_SHARED_FOLDER_1_ACTIVE='no' # 1. activate folder: yes or no
IMAP_SHARED_FOLDER_1_NAME='Family-News'
# folder to create
IMAP_SHARED_FOLDER_1_USERGROUP='' # individual usergroup for
folder
IMAP_PUBLIC_FOLDER_N='0' # number of public folders to
create
IMAP_PUBLIC_FOLDER_1_ACTIVE='no' # 1. activate folder: yes or no
IMAP_PUBLIC_FOLDER_1_NAME='Announcements'
# folder to create
IMAP_PUBLIC_FOLDER_1_USERGROUP='' # individual usergroup for
folder
#-----------------------------------------------------------------------
-------
# fetchmail: general settings
#-----------------------------------------------------------------------
-------
START_FETCHMAIL='yes' # start FETCHMAIL client: yes or
no
FETCHMAIL_PROTOCOL='imap' # protocol to use, normally pop3
FETCHMAIL_LIMIT='4096000' # mail size limit. Default: 4
megabytes
FETCHMAIL_WARNINGS='86400' # send warnings once a day (in
seconds)
FETCHMAIL_DAEMON='1800' # check every 30 minutes (in
seconds)
FETCHMAIL_TIMEOUT='90' # wait for server reply (in
seconds)
FETCHMAIL_BOUNCE_MAIL='no' # send error mail to sender: yes
or no
FETCHMAIL_BOUNCE_SPAM='no' # bounce spam mail to sender: yes
or no
FETCHMAIL_BOUNCE_SOFT='yes' # soft bounce mail: yes or no
#-----------------------------------------------------------------------
-------
# fetchmail: accounts
#-----------------------------------------------------------------------
-------
FETCHMAIL_N='0' # number of accounts to fetch
FETCHMAIL_1_ACTIVE='yes' # 1. activate fetchmail entry:
yes or no
FETCHMAIL_1_COMMENT='my first server' # optional comment to identify
entry
FETCHMAIL_1_SERVER='mail.spa51753.lunar.eclipse.galaxy.io'
# mail server to poll
FETCHMAIL_1_USER='heinz' # username and
FETCHMAIL_1_PASS='katmandu' # password for this server
FETCHMAIL_1_FORWARD='heinz at spa51753.lunar.eclipse.galaxy.io'
# local account to forward to
FETCHMAIL_1_SMTPHOST='' # smtp host to forward to,
# default is 'localhost'
FETCHMAIL_1_IMAP_FOLDER='' # imap folders to request,
default is 'INBOX'
FETCHMAIL_1_DOMAIN='no' # if yes fetchmail gets mail
for
# a whole domain.
FETCHMAIL_1_ENVELOPE='no' # if yes, lookup envelope
addresses
FETCHMAIL_1_ENVELOPE_HEADER='' # look for individual address
header
FETCHMAIL_1_SERVER_AKA_N='0' # number of dns aliases,
default is '0'
FETCHMAIL_1_SERVER_AKA_1='' # 1. dns alias
FETCHMAIL_1_LOCALDOMAIN_N='0' # number of local domains,
default is '0'
FETCHMAIL_1_LOCALDOMAIN_1='' # 1. local domain
FETCHMAIL_1_LOCALDOMAIN_2='' # 2. local domain
FETCHMAIL_1_PROTOCOL='' # set a different protocol
# default is
FETCHMAIL_PROTOCOL
FETCHMAIL_1_PORT='' # set a different ip port,
default is 'pop3'
FETCHMAIL_1_AUTH_TYPE='' # set a different
authentication type
# default is 'any'
FETCHMAIL_1_ACCEPT_BAD_HEADER='no' # accept bad email headers:
yes or no
FETCHMAIL_1_DNS_LOOKUP='yes' # if yes dns lookups are
performed
FETCHMAIL_1_KEEP='no' # if yes mail is left on the
server
FETCHMAIL_1_FETCHALL='no' # if yes all mail is fetched
from the server
FETCHMAIL_1_MSG_LIMIT='0' # number of messages per
session, default '0'
FETCHMAIL_1_SSL_PROTOCOL='none' # ssl protocol: none, ssl3 or
tls1
FETCHMAIL_1_SSL_TRANSPORT='no' # enable ssl transport
FETCHMAIL_1_SSL_FINGERPRINT='' # ssl fingerprint
#-----------------------------------------------------------------------
-------
# smtp: general settings
#-----------------------------------------------------------------------
-------
START_SMTP='yes' # start SMTP server: yes or no
SMTP_QUALIFY_DOMAIN='spa51753.lunar.eclipse.galaxy.io'
# domain to be added to all
unqualified
# addresses
SMTP_HOSTNAME='mail.spa51753.lunar.eclipse.galaxy.io'
# canonical hostname of eisfair
server
SMTP_QUEUE_INTERVAL='30' # queueing interval in minutes,
usually 30
SMTP_QUEUE_OUTBOUND_MAIL='no' # set to yes if you are using a
dialup ISP
# and you want to queue outbound
mail until
# next queue run which must be
initiated
# manually or cron-job
SMTP_QUEUE_ACCEPT_PER_CONNECTION='10' # msg number to accept in one
smtp session
SMTP_LISTEN_PORT='' # port(s) on which Exim is
listening for
# inbound traffic, default is
'smtp' and
# 'submission'
SMTP_MAIL_TO_UNKNOWN_USERS='bounce' # how to handle mail to unknown
mail users:
# bounce, copy or forward
# default is 'bounce'
SMTP_ALLOW_EXIM_FILTERS='no' # allow exim filters in .forward
file: yes or no
SMTP_CHECK_RECIPIENTS='' # check that not more than the
given number of
# recipients per mail are
addressed at once.
# Default is being set to 100
SMTP_CHECK_SPOOL_SPACE='' # check if enough disk space for
spool directory
# is available. Default is being
set to 10Mb
SMTP_CHECK_SPOOL_INODES='' # check if enough inodes for
spool directory
# are available. Default is being
set to 100
SMTP_LIMIT='' # mail size limit. Default is
being set to 50Mb
SMTP_REMOVE_RECEIPT_REQUEST='no' # remove external receipt
request: yes or no
SMTP_SERVER_TRANSPORT='default' # transport to use: default, tls
or both
SMTP_IDENT_CALLBACKS='yes' # enable ident callbacks: yes or
no
SMTP_SERVER_TLS_ADVERTISE_HOSTS='' # advertise STARTLS to these
hosts, to disable
# this feature set to ''
(required for tls!)
SMTP_SERVER_TLS_VERIFY_HOSTS='' # verify tls certs of these
hosts, to diasble
# this feature set to ''
SMTP_SERVER_TLS_TRY_VERIFY_HOSTS='' # try to verify tls certs of
these hosts, to
# disable this feature set to ''
SMTP_SERVER_SSMTP='no' # start SSMTP server: yes or no
SMTP_SERVER_SSMTP_LISTEN_PORT='' # port on which Exim is listening
for
# inbound traffic, default is
'ssmtp'
#-----------------------------------------------------------------------
-------
# smtp: local domains
#-----------------------------------------------------------------------
-------
SMTP_LOCAL_DOMAIN_N='3' # number of local domains
SMTP_LOCAL_DOMAIN_1='@' # 1. local domain, @ means
SMTP_HOSTNAME
SMTP_LOCAL_DOMAIN_2='localhost' # 2. local domain
SMTP_LOCAL_DOMAIN_3='spa51753.lunar.eclipse.galaxy.io'
# 3. local domain
#-----------------------------------------------------------------------
-------
# smtp: relay to domains
#
# Optional:
# The folllowing setting specify domains for which your host is an
incoming
# relay. If you are not doing any relaying, you should leave the list
empty.
# However, if your host is an MX backup or gateway of some kind for
some
# domains, you must set SMTP_RELAY_TO_DOMAIN_x to match those
domains.
#-----------------------------------------------------------------------
-------
SMTP_RELAY_TO_DOMAIN_N='0' # domains for which we are
incoming relay
SMTP_RELAY_TO_DOMAIN_1='domain.de'
#-----------------------------------------------------------------------
-------
# smtp: relay from hosts
#
# The following settings specify hosts that can use your host as an
# outgoing relay to any other host on the Internet. Such a setting
# commonly refers to a complete local network as well as the localhost.
#-----------------------------------------------------------------------
-------
SMTP_RELAY_FROM_HOST_N='2' # hosts/nets from we accept
outgoing mails
SMTP_RELAY_FROM_HOST_1='127.0.0.1'
SMTP_RELAY_FROM_HOST_2='10.97.108.0/23'
SMTP_RELAY_FROM_HOST_3='127.0.0.1'
#-----------------------------------------------------------------------
-------
# smtp: server authentication
#
# Optional:
# Set the type of server authentication.
# none - no authentication
# user - each user authenticates himself by his username/password
# server - all users authenticate themself by sending a global
user/pass
#-----------------------------------------------------------------------
-------
SMTP_AUTH_TYPE='none' # authentication: none, user,
server,
# user_light or server_light
SMTP_AUTH_USER='' # if server: global username,
else empty
SMTP_AUTH_PASS='' # if server: global password,
else empty
#-----------------------------------------------------------------------
-------
# smtp: smarthosts
#
# Optional:
# Send all outgoing messages to a smarthost (e.g. mail server of your
isp).
#-----------------------------------------------------------------------
-------
SMTP_SMARTHOST_ONE_FOR_ALL='no' # use one smarthost for all
accounts:
# if 'yes', the first entry will
be read
# if 'no', user specific entries
will be used
SMTP_SMARTHOST_DOMAINS='' # if
SMTP_SMARTHOST_ONE_FOR_ALL='yes' then
# use it only for these domains
(separated by ':')
SMTP_SMARTHOST_ROUTE_TYPE='addr' # if
SMTP_SMARTHOST_ONE_FOR_ALL='no' then how to select
# smart host: by sender mail
'addr'ess or destination 'domain'
SMTP_SMARTHOST_N='0' # number of smarthost entries
SMTP_SMARTHOST_1_HOST='' # 1. smart host to send mail to,
e.g. mail.gmx.net
SMTP_SMARTHOST_1_AUTH_TYPE='none' # 'none', 'plain', 'login',
'md5' or 'msn'
SMTP_SMARTHOST_1_ADDR='user at local.lan' # if
SMTP_SMARTHOST_ROUTE_TYPE='addr': sender mail address
SMTP_SMARTHOST_1_DOMAIN='local.lan' # if
SMTP_SMARTHOST_ROUTE_TYPE='domain': destination domain
SMTP_SMARTHOST_1_USER='' # if authentication required:
username
SMTP_SMARTHOST_1_PASS='' # if authentication required:
password
SMTP_SMARTHOST_1_FORCE_AUTH='no' # set to 'yes' to allow only
authenticated connections
SMTP_SMARTHOST_1_FORCE_TLS='no' # set to 'yes' to allow only
secure connections
SMTP_SMARTHOST_1_PORT='' # port to use for outgoing
connections, default is 'smtp'
#-----------------------------------------------------------------------
-------
# smtp: update ignore hosts file
#-----------------------------------------------------------------------
-------
SMTP_UPDATE_IGNORE_HOSTS='no' # update ignore hosts: yes or no
SMTP_UPDATE_IGNORE_HOSTS_CRON_SCHEDULE='5 1 * * 0'
# cron configuration string
#-----------------------------------------------------------------------
-------
# smtp: aliases
#
# Here you can specify aliases
#
# General format:
# SMTP_ALIASES_x_ALIAS_y='name: user1[,user2,...]
#
# Example:
# SMTP_ALIASES_N='2'
# ...
# SMTP_ALIASES_2_DOMAIN='2nd.local.lan'
# SMTP_ALIASES_2_ALIAS_N='1'
# SMTP_ALIASES_2_ALIAS_1='frank: fm,foo at otherwhere.com'
#
# Mails to mailto:frank at domain.de will be delivered to local user fm and
to
# user foo at otherwhere.com.
#-----------------------------------------------------------------------
-------
SMTP_ALIASES_N='1' # number of domains: default: 1
SMTP_ALIASES_1_DOMAIN='' # 1. domain name: will only be
read if SMTP_ALIASES_N > 1
# and not
SMTP_ALIASES_1_DOMAIN
SMTP_ALIASES_1_ALIAS_N='1' # number of aliases
SMTP_ALIASES_1_ALIAS_1='root: fm' # 1. alias must be for user
'root'!
#-----------------------------------------------------------------------
-------
# smtp: outgoing addresses
#
# Here you can specify an address translation table which is only
available
# if SMTP_SMARTHOST_N has been set to a value greater than 0.
#
# General format:
# SMTP_OUTGOING_ADDRESSES_x='name: email address'
#
# Example:
# SMTP_OUTGOING_ADDRESSES_1='fm: frank at domain.de'
#
# Mail from local user 'fm' will be delivered by using sender address
# 'frank at domain.de'.
#-----------------------------------------------------------------------
-------
SMTP_OUTGOING_ADDRESSES_N='0'
SMTP_OUTGOING_ADDRESSES_1='fm: frank at domain.de'
#-----------------------------------------------------------------------
-------
# smtp: incoming addresses
#
# Example:
# SMTP_HEADER_REWRITE_1_SOURCE='*@home.lan'
# SMTP_HEADER_REWRITE_1_DESTINATION='$1 at domain.de'
# SMTP_HEADER_REWRITE_1_FLAGS='sF'
#
# The envelope from address and the sender of an incoming smtp mail
from
# user 'frank at home.lan' will be rewritten to 'frank at domain.de'
#-----------------------------------------------------------------------
-------
SMTP_HEADER_REWRITE_N='0' # number of rewrite rules
SMTP_HEADER_REWRITE_1_SOURCE='*@home.lan'
# 1. search mask
SMTP_HEADER_REWRITE_1_DESTINATION='valid at domain.de'
# replace string
SMTP_HEADER_REWRITE_1_FLAGS='sF' # what to rewrite
#-----------------------------------------------------------------------
-------
# smtp: mailing lists
#
# Here you can specify simple mailing lists
#
# Explanation of example below:
#
# A mail to 'eisfair at domain.de' will be delivered to all members in the
list.
# The reply address will be changed to 'eisfair at domain.de'!
#-----------------------------------------------------------------------
-------
SMTP_LIST_DOMAIN='home.lan' # domain part of mailing list
addrs
SMTP_LIST_ERRORS='frank at home.lan' # send errors to this address
SMTP_LIST_N='1' # number of mailing lists, change
here!
#-----------------------------------------------------------------------
-------
SMTP_LIST_1_ACTIVE='yes' # 1. activate list: yes or no
SMTP_LIST_1_NAME='eisfair' # name of list
SMTP_LIST_1_USER_N='1' # number of list members
SMTP_LIST_1_USER_1='heinz at spa51753.lunar.eclipse.galaxy.io'
# 1. member
SMTP_LIST_1_USER_2='tom at home.lan' # 2. member
#-----------------------------------------------------------------------
-------
SMTP_LIST_2_ACTIVE='no' # 2. activate list: yes or no
SMTP_LIST_2_NAME='fli4l' # name of list
SMTP_LIST_2_USER_N='2' # number of list members
SMTP_LIST_2_USER_1='frank at home.lan' # 1. member
SMTP_LIST_2_USER_2='joe at home.lan' # 2. member
#-----------------------------------------------------------------------
-------
# exiscan: virus scanning
#
# Here you can specify an additinal antivirus scanner Please make sure
# that you have installed a antivirus software prior you enable these
feature.
#-----------------------------------------------------------------------
-------
START_EXISCAN='no' # start EXISCAN: yes or no
EXISCAN_ACTION_ON_FAILURE='defer' # defer, drop or ignore scanner
failures
EXISCAN_CRYPT_SALT='uHDOqtXpHvzQegw5' # crypt salt - `must' be set to a
unique
# character string!
EXISCAN_DEMIME_ENABLED='yes' # unpack mime containers: yes or
no
EXISCAN_DEMIME_ACTION='pass' # action on mime exploids: pass,
reject,
# discard, freeze, redirect
<address>
EXISCAN_AV_ENABLED='no' # use viruscanner: yes or no
EXISCAN_AV_ACTION='reject' # action on virus: pass, reject,
discard,
# freeze, redirect <address>
EXISCAN_AV_SUBJECT_TAG='*VIRUS*' # mark subject with tag, only
usefull if
# EXISCAN_AV_ACTION has been set
to 'pass'
EXISCAN_AV_SCANNER='auto' # scanner: auto, cmdline, sophie,
kavdaemon,
# aveserver, clamd, drweb,
fsecure, mksd
EXISCAN_AV_PATH='' # path to antivirus scanner
EXISCAN_AV_OPTIONS='' # cmdline option for scanner
incl. '%s'
EXISCAN_AV_TRIGGER='' # regexp string if virus has been
found
EXISCAN_AV_DESCRIPTION='' # grep virus name from regexp
description
EXISCAN_AV_SOCKET='' # socket for sophie, kavdaemon,
clamav ...
EXISCAN_AV_SKIP_AUTHENTICATED='no' # skip scan for authenticated
users
EXISCAN_EXTENSION_ENABLED='no' # use extension checking: yes or
no
EXISCAN_EXTENSION_ACTION='reject' # action on extension: pass,
reject, discard,
# freeze, redirect <address>
EXISCAN_EXTENSION_DATA='exe:com:vbs' # filter 'exe', 'com' and 'vbs'
extensions
EXISCAN_REGEX_ENABLED='no' # use regex checking: yes or no
EXISCAN_REGEX_ACTION='reject' # action on regex: pass, reject,
discard,
# freeze, redirect <address>
EXISCAN_REGEX_DATA='[Mm]ortage : make money'
# filter '[Mm]ortage' and 'make
money' strings
EXISCAN_SPAMD_ENABLED='no' # use spamd checking: yes or no
EXISCAN_SPAMD_ACTION='redirect spam at home.lan'
# action on spamd: pass, reject,
discard,
# freeze, redirect <address>
EXISCAN_SPAMD_HEADER_STYLE='flag' # type of X-header: none, single,
flag, full,
# alwaysfull
EXISCAN_SPAMD_SUBJECT_TAG='*SPAM*' # mark subject with tag, only
usefull if
# EXISCAN_SPAMD_ACTION has been
set to 'pass'
EXISCAN_SPAMD_THRESHOLD='5.0' # spamd score threshold
EXISCAN_SPAMD_ADDRESS='127.0.0.1 783' # address on which spamd is
listening
EXISCAN_SPAMD_LIMIT='100k' # mail size limit, default: no
limit
EXISCAN_SPAMD_SKIP_AUTHENTICATED='no' # skip scan for authenticated
users
#-----------------------------------------------------------------------
-------
# mail: send warning if TLS certificates will become invalid
#-----------------------------------------------------------------------
-------
MAIL_CERTS_WARNING='no' # send certs warning: yes or no
MAIL_CERTS_WARNING_SUBJECT='TLS certificates warning'
# subject of warning mail
MAIL_CERTS_WARNING_CRON_SCHEDULE='3 1 1,11,22 * *'
# cron configuration string
#-----------------------------------------------------------------------
-------
# mail: send queue warning if limit has been reached
#-----------------------------------------------------------------------
-------
MAIL_QUEUE_WARNING='no' # send queue warning: yes or no
MAIL_QUEUE_WARNING_SUBJECT='Mail queue limit warning'
# subject of warning mail
MAIL_QUEUE_WARNING_CRON_SCHEDULE='10,40 * * * *'
# cron configuration string
#-----------------------------------------------------------------------
-------
# mail: send exim statistics
#-----------------------------------------------------------------------
-------
MAIL_STATISTICS_INFOMAIL='no' # send statistics infomail: yes
or no
MAIL_STATISTICS_INFOMAIL_SUBJECT='Mail server statistics'
# subject of infomail
MAIL_STATISTICS_INFOMAIL_CRON_SCHEDULE='55 23 * * 6'
# cron configuration string
#-----------------------------------------------------------------------
-------
# mail: log handling
#
# Here you can specify how many logs should be saved and in with
interval.
#
# Example:
# MAIL_LOG_COUNT='10' - save the last 10 log files
# MAIL_LOG_INTERVAL='daily' - save one log file per day
#-----------------------------------------------------------------------
-------
MAIL_LOG_COUNT='10' # number of log files to save
MAIL_LOG_INTERVAL='weekly' # interval: daily, weekly,
monthly
#-----------------------------------------------------------------------
-------
# End
#-----------------------------------------------------------------------
-------
Mehr Informationen über die Mailingliste Eisfair