[Eisfair] [E1] Fehlermeldungen beim Booten
Wolfgang Loefstedt
oliaros at web.de
Do Apr 12 19:39:42 CEST 2018
Am 12.04.2018 um 18:31 schrieb Marcus Roeckrath:
> Könnten einfach nur Kontakt-/Kabelfehler sein.
>
> Bitte steck mal die Kabel zwischen Board einmal ab und wieder an, oder
> tausche sie, wenn du noch Ersatz hast.
>
> Poste mal
>
> smartctl -a /dev/hdc
> smartctl -a /dev/hda
>
Hallo Marcus,
die Kabel habe ich neu gesteckt, die Fehlermeldungen sind geblieben. Ich
werde die Kabel austauschen, wenn ich Erstatz habe.
Anbei die Ausgaben von smartctl:
-----------------------------------------------------------------------
eisfair # smartctl -a /dev/hdc
smartctl 6.6 2017-11-05 r4594 [i686-linux-3.16.54-eisfair-1-SMP] (local
build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar
Device Model: WDC WD800BB-00DKA0
Serial Number: WD-WMAHL3821884
Firmware Version: 77.07W77
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 (minor revision not indicated)
Local Time is: Thu Apr 12 19:30:57 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 241) Self-test routine in progress...
10% of test remaining.
Total time to complete Offline
data collection: ( 2472) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 38) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 090 088 021 Pre-fail Always
- 2041
4 Start_Stop_Count 0x0032 096 096 040 Old_age Always
- 4643
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always
- 82394
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always
- 4547
194 Temperature_Celsius 0x0022 105 253 000 Old_age Always
- 38
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x000a 200 184 000 Old_age Always
- 1557
200 Multi_Zone_Error_Rate 0x0009 200 085 051 Pre-fail
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 441
-
# 2 Short offline Completed without error 00% 303
-
# 3 Short offline Completed without error 00% 827
-
# 4 Short offline Completed without error 00% 342
-
# 5 Short offline Completed without error 00% 1037
-
# 6 Extended offline Completed without error 00% 121
-
# 7 Short offline Completed without error 00% 120
-
# 8 Short offline Completed without error 00% 81
-
# 9 Short offline Completed without error 00% 1046
-
#10 Short offline Completed without error 00% 926
-
#11 Short offline Completed without error 00% 506
-
#12 Short offline Completed without error 00% 272
-
#13 Extended offline Completed without error 00% 63
-
#14 Short offline Completed without error 00% 62
-
#15 Short offline Completed without error 00% 1018
-
#16 Short offline Completed without error 00% 866
-
#17 Extended offline Completed without error 00% 7
-
#18 Short offline Completed without error 00% 6
-
#19 Short offline Completed without error 00% 955
-
#20 Short offline Completed without error 00% 932
-
#21 Extended offline Completed without error 00% 632
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-------------------------------------------------------------------------------
eisfair # smartctl -a /dev/hda
smartctl 6.6 2017-11-05 r4594 [i686-linux-3.16.54-eisfair-1-SMP] (local
build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD800LB-00DNA0
Serial Number: WD-WCADW1391042
Firmware Version: 77.07W77
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA/ATAPI-6 (minor revision not indicated)
Local Time is: Thu Apr 12 19:34:18 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 241) Self-test routine in progress...
10% of test remaining.
Total time to complete Offline
data collection: ( 2475) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 38) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 082 079 021 Pre-fail Always
- 2433
4 Start_Stop_Count 0x0032 096 096 040 Old_age Always
- 4431
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always
- 81491
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always
- 4334
194 Temperature_Celsius 0x0022 101 253 000 Old_age Always
- 42
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x000a 200 183 000 Old_age Always
- 1562
200 Multi_Zone_Error_Rate 0x0009 200 085 051 Pre-fail
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 615
-
# 2 Short offline Completed without error 00% 477
-
# 3 Short offline Completed without error 00% 1000
-
# 4 Short offline Completed without error 00% 514
-
# 5 Short offline Completed without error 00% 117
-
# 6 Extended offline Completed without error 00% 292
-
# 7 Short offline Completed without error 00% 290
-
# 8 Short offline Completed without error 00% 252
-
# 9 Short offline Completed without error 00% 122
-
#10 Short offline Completed without error 00% 2
-
#11 Short offline Completed without error 00% 674
-
#12 Short offline Completed without error 00% 439
-
#13 Extended offline Completed without error 00% 229
-
#14 Short offline Completed without error 00% 228
-
#15 Short offline Completed without error 00% 91
-
#16 Short offline Completed without error 00% 1032
-
#17 Extended offline Completed without error 00% 172
-
#18 Short offline Completed without error 00% 171
-
#19 Short offline Completed without error 00% 26
-
#20 Short offline Completed without error 00% 2
-
#21 Extended offline Completed without error 00% 793
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
-----------------------------------------------------------------------
Gruss, w
Mehr Informationen über die Mailingliste Eisfair