[Eisfair] Owncloud Brauche Hilfe TRUSTED_DOMAIN

Friedhold Schuster f.schuster at gmx.de
Mo Nov 13 16:19:57 CET 2017


Am 13.11.2017 um 13:31 schrieb Marcus Roeckrath:
> smartctl -a /dev/sda

eis1 # smartctl -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [i686-linux-3.16.47-eisfair-1-SMP] (local 
build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Intenso  SSD Sata III
Serial Number:    AA000000000000008223
Firmware Version: N1126F
User Capacity:    126,701,535,232 bytes [126 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Nov 13 16:19:09 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                         was never started.
                                         Auto Offline Data Collection: 
Disabled.
Self-test execution status:      (   0) The previous self-test routine 
completed
                                         without error or no self-test 
has ever
                                         been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x71) SMART execute Offline immediate.
                                         No Auto Offline data collection 
support.
                                         Suspend Offline collection upon new
                                         command.
                                         No Offline surface scan supported.
                                         Self-test supported.
                                         Conveyance Self-test supported.
                                         Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                         entering power-saving mode.
                                         Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                         General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   1) minutes.
Conveyance self-test routine
recommended polling time:        (   1) minutes.
SCT capabilities:              (0x0035) SCT Status supported.
                                         SCT Feature Control supported.
                                         SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE 
UPDATED  WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age 
Offline      -       0
   5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age 
Offline      -       0
   9 Power_On_Hours          0x0000   100   100   000    Old_age 
Offline      -       152
  12 Power_Cycle_Count       0x0000   100   100   000    Old_age 
Offline      -       53
160 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       0
161 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       76
163 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       21
164 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       6136
165 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       29
166 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       0
167 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       5
168 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       3000
169 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       100
175 Program_Fail_Count_Chip 0x0000   100   100   000    Old_age 
Offline      -       0
176 Erase_Fail_Count_Chip   0x0000   100   100   000    Old_age 
Offline      -       0
177 Wear_Leveling_Count     0x0000   100   100   050    Old_age 
Offline      -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0000   100   100   000    Old_age 
Offline      -       0
181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age 
Offline      -       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age 
Offline      -       0
192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age 
Offline      -       11
194 Temperature_Celsius     0x0000   100   100   000    Old_age 
Offline      -       24
195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age 
Offline      -       152
196 Reallocated_Event_Count 0x0000   100   100   016    Old_age 
Offline      -       0
197 Current_Pending_Sector  0x0000   100   100   000    Old_age 
Offline      -       0
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age 
Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   100   100   050    Old_age 
Offline      -       0
232 Available_Reservd_Space 0x0000   100   100   000    Old_age 
Offline      -       100
241 Total_LBAs_Written      0x0000   100   100   000    Old_age 
Offline      -       16153
242 Total_LBAs_Read         0x0000   100   100   000    Old_age 
Offline      -       5146
245 Unknown_Attribute       0x0000   100   100   000    Old_age 
Offline      -       24544

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
     2        0        0  Not_testing
     3        0        0  Not_testing
     4        0        0  Not_testing
     5        0        0  Not_testing
     6        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
   After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

eis1 #


So?

Danke für Eure Mühe


Mehr Informationen über die Mailingliste Eisfair