[Eisfair] eisgraph / lmsensors

[Stefan Puschek]

Hallo Heinz-Peter,
...
> entlade doch mal das coretemp-Modul, dann sollten die unerwünschten 
> Werte weg sein.
> Wenn Du keine Nebenwirkungen feststellst, machst Du das Ganze durch 
> blacklisten rebootfest.

barbrady # sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +12.0°C  (crit = +100.0°C)
Core 1:        +5.0°C  (crit = +100.0°C)

w83627thf-isa-0290
Adapter: ISA adapter
VCORE:        +1.15 V  (min =  +0.70 V, max =  +1.20 V)
+3.3V:        +3.29 V  (min =  +3.14 V, max =  +3.45 V)
+12V:        +12.26 V  (min = +11.43 V, max = +12.58 V)
+5V:          +4.93 V  (min =  +4.75 V, max =  +5.25 V)
+5VSB:        +4.96 V  (min =  +4.75 V, max =  +5.25 V)
CASE-FAN:    1004 RPM  (min =  795 RPM, div = 32)
MB-TEMP:      +40.0°C  (high = +60.0°C, hyst = +55.0°C)  sensor = thermistor
CPU1-TEMP:    +27.5°C  (high = +45.0°C, hyst = +40.0°C)  sensor = CPU diode
CPU2-TEMP:    +27.5°C  (high = +45.0°C, hyst = +40.0°C)  sensor = CPU diode

barbrady # rmmod coretemp
barbrady # sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCORE:        +1.15 V  (min =  +0.70 V, max =  +1.20 V)
+3.3V:        +3.29 V  (min =  +3.14 V, max =  +3.45 V)
+12V:        +12.26 V  (min = +11.43 V, max = +12.58 V)
+5V:          +4.96 V  (min =  +4.75 V, max =  +5.25 V)
+5VSB:        +4.96 V  (min =  +4.75 V, max =  +5.25 V)
CASE-FAN:     981 RPM  (min =  795 RPM, div = 32)
MB-TEMP:      +40.0°C  (high = +60.0°C, hyst = +55.0°C)  sensor = thermistor
CPU1-TEMP:    +27.5°C  (high = +45.0°C, hyst = +40.0°C)  sensor = CPU diode
CPU2-TEMP:    +27.5°C  (high = +45.0°C, hyst = +40.0°C)  sensor = CPU diode

barbrady #

und wo blackliste ich das Modul korrekterweise und dauerhaft?

darf/muss ich händisch in /etc/modprobe.d selbst eine passende 
*-blacklist.conf-Datei anlegen oder geht das irgendwo im setup-Menü?

Groetjes
Stefan