[Eisfair] smartd - kein Zugriff auf die Festplattendaten

[Jürgen Witt]

Hallo Kay,

Am 07.01.2017 um 14:43 schrieb kay:
> 
> Hast du es mal mit einem zusätzlichen SAT bei -d cciss versucht?
> Das müsste dann '-d sat+cciss,0' sein um den SCSI to ATA Layer ein zu
> bringen.


eis # smartctl -d sat+cciss,0 -a /dev/cciss/c0d0
smartctl 6.5 2016-05-07 r4318 [i686-linux-3.2.82-eisfair-1-SMP] (local
build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: empty IDENTIFY data

A mandatory SMART command failed: exiting. To continue, add one or more
'-T perm                                              issive' options.


Ok, noch ein Versuch.

eis # smartctl -d sat+cciss,0 -a -T verypermissive /dev/cciss/c0d0
smartctl 6.5 2016-05-07 r4318 [i686-linux-3.2.82-eisfair-1-SMP] (local
build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: empty IDENTIFY data

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Sat Jan  7 14:51:57 2017 CET
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show
if SMAR                                              T supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show
if SMAR                                              T is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers
missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection:
Disabled.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x00)         Offline data collection
not supp                                              orted.
SMART capabilities:            (0x0000) Automatic saving of SMART data
      i                                              s not implemented.
Error logging capability:        (0x00) Error logging NOT supported.
                                        No General Purpose Logging support.

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision
number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported


> IMHO hat das bei meinem Proliant das Problem gelöst. Das war aber kein
> Eisfair sondern debian-basiert.

Schade, bei mir leider ohne Erfolg. Aber danke für Deine Mühe.

Gruß
Jürgen