[Eisfair] Paket hdtune

[Armin Weinmann]

Hallo zusammen,

sorry für meine späte Antwort, ich war etwas beschäftigt die letzten Tage...

Am 07.11.2016 um 09:00 schrieb Johannes Hinteregger:
> Unter /etc gibt es keine hdparm.conf.
>
ich habe folgendes gemacht:

(Inhalte zwischen den gestrichelten Linien)

1. /etc/check.d/hdtune.exp

-------------------------------------------------------------------------------------------
HDTUNE_DEVICE   = '(RE:DISK)'
                 : 'allowed disks from base.exp'
-------------------------------------------------------------------------------------------


2. /etc/init.d/hdtune:

-------------------------------------------------------------------------------------------
#! /bin/sh
#------------------------------------------------------------------------------
# /etc/rc.d/rc.hdtune - change modes for ide-harddisks
#
# Creation:    2001-07-31 tb
# Last Update: 2015-05-26 tb
#------------------------------------------------------------------------------

# . ../config.d/hdtune
. /etc/config.d/hdtune
. /var/install/include/eislib

tmp="/tmp/hdtune"

if [ "$HDTUNE_DO_DEBUG" = yes ]
then
     set -x
fi

#if [ "$START_HDTUNE" = "yes" ]
#then
     mecho -info "setting hdd modes now..."

     idx=1
     while [ "$idx" -le "$HDTUNE_N" ]
     do
         eval device='$HDTUNE_'$idx'_DEVICE'
         eval time='$HDTUNE_'$idx'_SLEEPTIME'
         eval speed='$HDTUNE_'$idx'_PERFORMANCE'
         eval io_access='$HDTUNE_'$idx'_32BIT'
         eval dma_access='$HDTUNE_'$idx'_DMA'
         eval acoustic='$HDTUNE_'$idx'_ACOUSTIC'
         params=''
         >$tmp

         # calculate sleeptime-parameter
         if [ "$time" != "0" ]
         then
             if [ "$time" -ge 300 ]
             then
                 mecho -warn "a timeout above five hours is not 
supported, changed to five hours"
                 sleep 5
                 sleep=250
             elif [ "$time" -gt 20 ]
             then
                 time=`/usr/bin/expr $time - 1`
                 sleep=`/usr/bin/expr $time / 30 + 241`
             else
                 sleep=`/usr/bin/expr $time \* 60 / 5`
             fi

             if `/sbin/hdparm -i /dev/$device >/dev/null 2>&1`
             then
                 params="-S$sleep"
             fi
         fi

         if [ "$speed" = "yes" ]
         then
             # activate lookahead
             lookahead=`/sbin/hdparm -I /dev/$device 2>/dev/null | grep 
'Look-ahead'`
             if [ -n "$lookahead" ]
             then
                 params="$params -A1"
             fi

             case $device in
             hd*)
                 # get maximum multiple sector count from device
                 maxmult=`/sbin/hdparm -i /dev/$device 2>/dev/null | 
grep MaxMultSect | sed 's/,//g'`
                 if [ -n "$maxmult" ]
                 then
                     for i in $maxmult
                     do
                         echo $i | grep MaxMultSect > /dev/null
                         if [ "$?" = "0" ]
                         then
                             maxmultsect=`echo $i | cut -d = -f2`
                         fi
                     done

                     if [ "$maxmultsect" -gt 2 -a "$maxmultsect" -le 64 ]
                     then
                         params="$params -m$maxmultsect"
                     fi
                 fi
                 ;;
             esac
         fi

         case $device in
         hd*)
             params="-a4"

             if [ "$io_access" = yes ]
             then
                 params="$params -c1"
             fi

             if [ "$dma_access" = yes ]
             then
                 params="$params -d1"
             fi
             ;;
         esac

         if [ "$acoustic" != "" ]
         then
             ac=`/sbin/hdparm -I /dev/$device 2>/dev/null | grep 'Acoustic'`
             if [ -n "$ac" ]
             then
                 params="$params -M$acoustic"
             fi
         fi

         cfmedia=`/sbin/hdparm -i /dev/$device 2>/dev/null | grep 
nonMagnetic`
         if [ "$cfmedia" = "" ]
         then
             if [ "$params" != "" ]
             then
                 /sbin/hdparm $params /dev/$device > $tmp
                 if [ "$?" != "0" ]
                 then
                     cat $tmp
                     mecho -error "*** ERROR: Disk $device does not 
support your HDTUNE-Settings. ***"
                     sleep 5
                 fi
             fi
         else
             mecho -warn "*** WARNING: Disk $device is not a harddisk, 
Operation not supported ***"
         fi

         message=`cat $tmp`
         if [ -n "$message" ]
         then
             /usr/bin/logger -s -t "hdtune" -f $tmp
         fi

         idx=`/usr/bin/expr $idx + 1`
     done
#fi

# undocumented function: use at your own risk!
# you can set the maximum rotation speed of a cdrom here
# hdparm -E 4 /dev/hda

rm $tmp
set +x
-------------------------------------------------------------------------------------------

Kommt aus dem Beitrag von Tom Bork vom 26.05.2015 zum Thema 'Paket 
hdtune modifizieren'

Ob ich damit allerdings die Platten zum Anhalten bekomme habe ich noch 
nicht verifiziert

Armin