[Eisfair] [e1] asterisk-dahdi-hfcs mit 2 Karten
Stefan Welte
post at stefan-welte.de
Di Apr 12 12:25:05 CEST 2016
Hallo beisammen,
um bei eingehenden Telefonaten mehr als zwei ISDN-Telefone gleichzeitig bimmeln zu lassen, habe ich soeben
eine zwote HFC-S-Karte eingebaut.
Leider läuft eine der beiden Karten scheinbar nicht im NT-Modus:
> eis2*CLI> dahdi show status
> Description Alarms IRQ bpviol CRC Fra Codi Options LBO
> HFC-S PCI A ISDN card 0 [NT] OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
> HFC-S PCI A ISDN card 1 [TE] OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1)
> eis2*CLI>
Konfiguration:
> START_DAHDI='yes' # Start Dahdi, yes or no
> DAHDI_TONEZONE='de' # Default = de
> DAHDI_CARDS_N='1' # Number of DAHDI Cards
> DAHDI_CARDS_1_NAME='hfcs' # it is only for you
> DAHDI_CARDS_1_ACTIVE='yes' # Use: yes or no
> DAHDI_CARDS_1_DRIVER='dahdi_hfcs' # Drivername
> DAHDI_CARDS_1_OPTION='nt_modes=0' # option for driver, if required
> ASTERISK_LOAD_DAHDI='yes' # Load Dahdi modules at up?
> ASTERISK_HFCS_GROUP_N='1'
> ASTERISK_HFCS_GROUP_1_ACTIVE='yes'
> ASTERISK_HFCS_GROUP_1_TYPE='zaphfc' # 'zaphfc' for normal HFCS card or multi
> # for double or quad port cards
> ASTERISK_HFCS_GROUP_1_PROVIDE_S0_BUS='yes'
> # 'yes' if you want to connect other phones to
> # this port. 'no' if you connect this port to
> # your phone company
> ASTERISK_HFCS_GROUP_1_PTP='no' # if the port is connected to your phone company
> # and you have a Point-to-Point (Anlagenanschluss)
> # connection, set this to yes
> ASTERISK_HFCS_GROUP_1_PORTS='2' # How many RJ45 ports belong to this group
> # (may be spreaded over serveral cards)
Jemand eine Idee, wo es eckt?
Danke,
Stefan
Mehr Informationen über die Mailingliste Eisfair