[Eisfair] Fritz usb 2.1

[Marcus Roeckrath]

Hallo Lutz,

Lutz Spindler wrote:

>>sowas z.B.
> 
>        >Kernel driver in use: ehci_hcd
>        >Kernel modules: ehci_hcd
> Hier das Ergebnis
> 
> 00:0f.4 USB controller: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode
> companion] OHC (rev 02) (prog-if 10 [OHCI])
>         Subsystem: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode
> companion] OHC
>         Flags: 66MHz, medium devsel, IRQ 12
>         Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [40] Power Management version 2
>         Kernel modules: ohci_hcd
> 
> 00:0f.5 USB controller: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode
> companion] EHC (rev 02) (prog-if 20 [EHCI])
>         Subsystem: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode
> companion] EHC
>         Flags: 66MHz, medium devsel, IRQ 12
>         Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [40] Power Management version 2
>         Kernel modules: ehci_hcd

Es sind keine Treiber geladen, da bei beiden Controller die Ausgabe "Kernel
driver in use" fehlt.

Steht START_USB auf yes in der USB-Konfiguration?

System administration|Driver administration|USB administration

-- 
Gruss Marcus