[Eisfair] anderen Gateway über DHCP vergeben als den vom Server

[Daniel Heide]

Am 29.05.2013 22:43, schrieb Olaf Jaehrling:
> Hallo Daniel,
>
> kannst Du mal bitte deine komplette dhcpd config posten?
>
> cat /etc/config.d/dhcpd | sed 's/ *#.*$//' | grep -v ^$

START_DHCPD='yes'
DHCPD_DYNAMIC_N='1'
DHCPD_DYNAMIC_1_ACTIVE='yes'
DHCPD_DYNAMIC_1_RANGE='192.168.5.10 192.168.5.99'
DHCPD_DYNAMIC_2_ACTIVE='no'
DHCPD_DYNAMIC_2_RANGE='192.168.70.100 192.168.70.150'
DHCPD_PXE_N='0'
DHCPD_PXE_1_NAME='fli4l'
DHCPD_PXE_1_ACTIVE='no'
DHCPD_PXE_1_DESCRIPTION='fli4l (router)'
DHCPD_PXE_1_KERNEL='fli4l/kernel'
DHCPD_PXE_1_INITRD='fli4l/rootfs.img'
DHCPD_PXE_1_ROOTFS='/dev/tmpfs'
DHCPD_PXE_1_APPEND=''
DHCPD_PXE_2_NAME='linux'
DHCPD_PXE_2_ACTIVE='no'
DHCPD_PXE_2_DESCRIPTION='Linux System'
DHCPD_PXE_2_KERNEL='linux/kernel'
DHCPD_PXE_2_INITRD='linux/initrd.gz'
DHCPD_PXE_2_ROOTFS='/dev/ram0 rw'
DHCPD_PXE_2_APPEND='vga=normal devfs=nomount ramdisk_size=28000 
init=/linuxrc rip_initrd load_ramdisk=1 prompt_ramdisk=0'
DHCPD_CLIENT_N='4'
DHCPD_CLIENT_1_NAME='CD1120-L'
DHCPD_CLIENT_1_ACTIVE='yes'
DHCPD_CLIENT_1_MAC='00:c0:ee:18:35:f2'
DHCPD_CLIENT_1_IPV4='192.168.5.100'
DHCPD_CLIENT_1_NETBOOT=''
DHCPD_CLIENT_1_PXE_KERNEL=''
DHCPD_CLIENT_1_PXE_INITRD=''
DHCPD_CLIENT_1_PXE_ROOTFS=''
DHCPD_CLIENT_1_PXE_APPEND=''
DHCPD_CLIENT_2_NAME='CD1018-E'
DHCPD_CLIENT_2_ACTIVE='yes'
DHCPD_CLIENT_2_MAC='00:c0:ee:5f:bf:5c'
DHCPD_CLIENT_2_IPV4='192.168.5.101'
DHCPD_CLIENT_2_NETBOOT=''
DHCPD_CLIENT_2_PXE_KERNEL=''
DHCPD_CLIENT_2_PXE_INITRD=''
DHCPD_CLIENT_2_PXE_ROOTFS=''
DHCPD_CLIENT_2_PXE_APPEND=''
DHCPD_CLIENT_3_NAME='CD1018-B'
DHCPD_CLIENT_3_ACTIVE='yes'
DHCPD_CLIENT_3_MAC='00:c0:ee:2a:82:d5'
DHCPD_CLIENT_3_IPV4='192.168.5.102'
DHCPD_CLIENT_3_NETBOOT=''
DHCPD_CLIENT_3_PXE_KERNEL=''
DHCPD_CLIENT_3_PXE_INITRD=''
DHCPD_CLIENT_3_PXE_ROOTFS=''
DHCPD_CLIENT_3_PXE_APPEND=''
DHCPD_CLIENT_4_NAME='CDC1532'
DHCPD_CLIENT_4_ACTIVE='yes'
DHCPD_CLIENT_4_MAC='00:c0:ee:19:3d:90'
DHCPD_CLIENT_4_IPV4='192.168.5.103'
DHCPD_CLIENT_4_NETBOOT=''
DHCPD_CLIENT_4_PXE_KERNEL=''
DHCPD_CLIENT_4_PXE_INITRD=''
DHCPD_CLIENT_4_PXE_ROOTFS=''
DHCPD_CLIENT_4_PXE_APPEND=''


>
> Bitte auch die Ausgabe von ifconfig posten.

eth0      Link encap:Ethernet  HWaddr FE:14:1D:16:E9:C1
           inet addr:192.168.5.4  Bcast:192.168.5.255  Mask:255.255.255.0
           inet6 addr: fe80::fc14:1dff:fe16:e9c1/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:60896636 errors:0 dropped:0 overruns:0 frame:0
           TX packets:46340866 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:1684719217 (1606.6 Mb)  TX bytes:3166252941 (3019.5 Mb)

lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           inet6 addr: ::1/128 Scope:Host
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:2306883 errors:0 dropped:0 overruns:0 frame:0
           TX packets:2306883 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:450376613 (429.5 Mb)  TX bytes:450376613 (429.5 Mb)

tun0      Link encap:UNSPEC  HWaddr 
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
           inet addr:10.10.10.1  P-t-P:10.10.10.2  Mask:255.255.255.255
           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1400  Metric:1
           RX packets:13936 errors:0 dropped:0 overruns:0 frame:0
           TX packets:15761 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:100
           RX bytes:888898 (868.0 Kb)  TX bytes:9466216 (9.0 Mb)


>
>
> Ich hab da so eine Idee.
>
> Gruß
>
> Olaf
>