[Eisfair] massive Probleme mit sda und nur noch BFB fehlermeldungen
Detlef Paschke
schabau at t-online.de
So Jun 23 17:12:16 CEST 2013
"Marcus Roeckrath" schrieb im Newsbeitrag
news:gkcj9a-uk1.ln1 at ID-94514.user.dfncis.de...
>
> Hallo Detlef,
Hallo Marcus,
>
> Mit der Interpretation der smart-Werte tue ich mich auch schwer.
>
> Was sagt denn: smartctl-a /dev/sda
eisfair # smartctl -a /dev/sda
smartctl 5.43 2012-06-30 r3573 [i686-linux-2.6.32-eisfair-1-PAE] (local
build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: FUJITSU
Product: MAW3147NCSUN146G
Revision: 1703
User Capacity: 146,810,536,448 bytes [146 GB]
Logical block size: 512 bytes
Serial number: 000703C0D642 DBE0P920D642
Device type: disk
Transport protocol: Parallel SCSI (SPI-4)
Local Time is: Sun Jun 23 17:05:33 2013 CEST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: 35 C
Drive Trip Temperature: 65 C
Manufactured in week 03 of year 2007
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 128
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes
Total
ECC rereads/ errors algorithm processed
uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes]
errors
read: 0 16 0 0 0 7496.092
0
write: 0 84 0 0 0 987.454
0
Non-medium error count: 339
No self-tests have been logged
Long (extended) Self Test duration: 3427 seconds [57.1 minutes]
>
> Was passiert, wenn Du eine Knoppix startest und mal so richtig Last auf
> die
> Platte gibst?
>
das meinst Du wie?
> Hat die Knoppix eine Fehlerkonsole? Dort kann man noch Fehler sehen, wenn
> die Platte ro-remounted wurde.
Kann ich nicht sagen, hab die Knoppix nur für Notfälle hier.
Viele Grüße
Detlef Paschke
--
registered Fli4l-User #00000209
Das "Zitat des Augenblicks" gibt es nur auf
http://schabau.dyndns.org
Mehr Informationen über die Mailingliste Eisfair