[Eisfair] E1: lilo broken, kein Kernelupdate möglich

[Thomas Bork]

Am 15.06.2013 14:34, schrieb Thomas Lutze:

> Also wie repariere ich jetzt meine lilo-configuration?
> Habe da keinen Plan.
> Oder ist gar was Gröberes kaputt (part_nowrite: read:: Input/output error)?

Was zeigt

lilo -t -v3

auf der Konsole?



Hier ein Beispiel:

referencetest26 # lilo -t -v3
LILO version 23.2 (test mode)
  (released 09-Apr-2011)
   * Copyright (C) 1992-1998 Werner Almesberger  (until v20)
   * Copyright (C) 1999-2007 John Coffman  (until v22)
   * Copyright (C) 2009-2011 Joachim Wiedorn  (since v23)
This program comes with ABSOLUTELY NO WARRANTY. This is free software
distributed under the BSD License (3-clause). Details can be found in
the file COPYING, which is distributed with this software.
Compiled at 14:19:35 on Feb  3 2013
Running Linux kernel 2.6.32-eisfair-1-PAE on i686

device-mapper major = 253
raid_setup returns offset = 00000000  ndisk = 0
  BIOS   VolumeID   Device
Reading boot sector from /dev/hda
pf_hard_disk_scan: ndevs=1
   0300  2D1639F6  /dev/hda
Resolve invalid VolumeIDs
Resolve duplicate VolumeIDs
   0300  2D1639F6  /dev/hda
device codes (user assigned pf) = 1
device codes (user assigned) = 1
device codes (BIOS assigned) = 1
device codes (canonical) = 1
Device 0x0300: BIOS drive 0x80, 255 heads, 652 cylinders,
                63 sectors. Partition offset: 0 sectors.
Using Volume ID 2D1639F6 on bios 80
Device 0x0301: BIOS drive 0x80, 255 heads, 652 cylinders,
                63 sectors. Partition offset: 2048 sectors.
Using Volume ID 2D1639F6 on bios 80
mode = 0x03,  columns = 80,  rows = 25,  page = 0
Using MENU secondary loader
Calling map_insert_data
Secondary loader: 18 sectors (0x3600 dataend).
bios_boot = 0x80  bios_map = 0x80  map==boot = 0  map S/N: 2D1639F6
BIOS data check was okay on the last boot

Boot image: /boot/kernel
Device 0x0301: BIOS drive 0x80, 255 heads, 652 cylinders,
                63 sectors. Partition offset: 2048 sectors.
Using Volume ID 2D1639F6 on bios 80
Setup length is 24 sectors.
Mapped 4123 sectors.
Mapping RAM disk /boot/initrd.gz
Device 0x0301: BIOS drive 0x80, 255 heads, 652 cylinders,
                63 sectors. Partition offset: 2048 sectors.
Using Volume ID 2D1639F6 on bios 80
RAM disk: 2098 sectors.
The initial RAM disk will be loaded in the low memory below 15M.
Added eis  *
     <dev=0xe0,hd=0,cyl=100,sct=54>
     "ro root=303 raid=noautodetect"

Boot image: /boot/old-kernel
Device 0x0301: BIOS drive 0x80, 255 heads, 652 cylinders,
                63 sectors. Partition offset: 2048 sectors.
Using Volume ID 2D1639F6 on bios 80
Setup length is 23 sectors.
Mapped 4093 sectors.
Mapping RAM disk /boot/old-initrd.gz
Device 0x0301: BIOS drive 0x80, 255 heads, 652 cylinders,
                63 sectors. Partition offset: 2048 sectors.
Using Volume ID 2D1639F6 on bios 80
RAM disk: 2177 sectors.
The initial RAM disk will be loaded in the low memory below 15M.
Added oldeis
     <dev=0xe0,hd=0,cyl=73,sct=156>
     "ro root=303 raid=noautodetect"

  BIOS   VolumeID   Device
   80    2D1639F6    0300
The boot sector and the map file have *NOT* been altered.

> Der Reboot funktioniert, dauert aber sehr lange.

Gibt es in /var/log/messages Meldungen zum IDE-Controller oder der 
Festplatte?


-- 
der tom
[eisfair-team]