[Eisfair] CRC Fehler E1
Armin Weinmann
news at die-weinmanns.de
Di Jun 11 22:46:09 CEST 2013
Am 11.06.2013 22:09, schrieb Marcus Roeckrath:
> smartctl -a /dev/hda
gspols01 # smartctl -a /dev/hda
smartctl 5.39 2009-12-09 r2995 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda ES.2
Device Model: ST31000340NS
Serial Number: 9QJ2GZDL
Firmware Version: SN06
User Capacity: 1,000,204,886,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Jun 11 22:42:08 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 233) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 083 054 044 Pre-fail
Always - 219298080
3 Spin_Up_Time 0x0003 099 096 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 61
5 Reallocated_Sector_Ct 0x0033 093 093 036 Pre-fail
Always - 145
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail
Always - 161660467
9 Power_On_Hours 0x0032 057 057 000 Old_age
Always - 37919
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age
Always - 60
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always
- 452
188 Command_Timeout 0x0032 100 099 000 Old_age Always
- 4295032836
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always
- 181
190 Airflow_Temperature_Cel 0x0022 058 050 045 Old_age Always
- 42 (Lifetime Min/Max 32/43)
194 Temperature_Celsius 0x0022 042 050 000 Old_age Always
- 42 (0 11 0 0)
195 Hardware_ECC_Recovered 0x001a 031 023 000 Old_age Always
- 219298080
197 Current_Pending_Sector 0x0012 100 094 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 094 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always
- 1824
SMART Error Log Version: 1
ATA Error Count: 329 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 329 occurred at disk power-on lifetime: 32844 hours (1368 days +
12 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 50 a3 5d 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 b9 9c 5d 40 00 42d+14:09:50.903 READ FPDMA QUEUED
60 00 40 b9 9a 5d 40 00 42d+14:09:49.474 READ FPDMA QUEUED
60 00 02 b7 9a 5d 40 00 42d+14:09:49.466 READ FPDMA QUEUED
60 00 40 49 33 19 48 00 42d+14:09:49.429 READ FPDMA QUEUED
60 00 1a 2f 33 19 48 00 42d+14:09:49.408 READ FPDMA QUEUED
Error 328 occurred at disk power-on lifetime: 32791 hours (1366 days + 7
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bb 5d 2d 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 5b 50 2d 40 00 40d+08:42:36.958 READ FPDMA QUEUED
60 00 3c 1f 50 2d 40 00 40d+08:42:36.945 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 40d+08:42:36.896 READ FPDMA QUEUED
60 00 04 ff ff ff 4f 00 40d+08:42:36.885 READ FPDMA QUEUED
60 00 3c ff ff ff 4f 00 40d+08:42:36.884 READ FPDMA QUEUED
Error 327 occurred at disk power-on lifetime: 32748 hours (1364 days +
12 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7f f0 98 01
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 45 f0 98 41 00 38d+14:17:42.731 READ FPDMA QUEUED
60 00 40 45 eb 98 41 00 38d+14:17:42.084 READ FPDMA QUEUED
60 00 3e 07 eb 98 41 00 38d+14:17:42.065 READ FPDMA QUEUED
60 00 02 6d 2c 17 49 00 38d+14:17:42.064 READ FPDMA QUEUED
60 00 16 57 2c 17 49 00 38d+14:17:42.048 READ FPDMA QUEUED
Error 326 occurred at disk power-on lifetime: 32748 hours (1364 days +
12 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 17 06 95 01
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 e3 05 95 41 00 38d+14:16:28.060 READ FPDMA QUEUED
60 00 40 a3 05 95 41 00 38d+14:16:25.844 READ FPDMA QUEUED
60 00 40 63 04 95 41 00 38d+14:16:24.458 READ FPDMA QUEUED
60 00 04 5f 04 95 41 00 38d+14:16:24.444 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 38d+14:16:24.443 READ FPDMA QUEUED
Error 325 occurred at disk power-on lifetime: 32748 hours (1364 days +
12 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 06 35 99 01
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 f9 34 99 41 00 38d+14:15:22.584 READ FPDMA QUEUED
2f 00 01 10 00 00 40 00 38d+14:15:22.000 READ LOG EXT
60 00 40 f9 34 99 41 00 38d+14:15:18.959 READ FPDMA QUEUED
2f 00 01 10 00 00 40 00 38d+14:15:18.389 READ LOG EXT
60 00 40 b9 30 99 41 00 38d+14:15:15.015 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Interrupted (host reset) 60% 0
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
nein, Kabel wurden noch keine gesteckt, das Ding steht in unserer
örtlichen Grundschule, da muss ich erst (physikalischen) Zugang bekommen...
Danke für die Antwort!
Armin
Mehr Informationen über die Mailingliste Eisfair