[Eisfair] Eisfair-1: Ist Smartmon für Abstürze verantwortlich?

[Jürgen Witt]

Hallo NG,

ich habe bei einem Eisfair-1-Server (base 2.0.2, kernel 2.0.3.1, 
smartmon 1.5.2) seit 3 Tagen das Problem, daß das System abschmiert.
Auffällig ist, daß in /var/log/messages als letzte Aktion vor dem 
Neustart immer das Plotten von smartmon ausgeführt wird.


Apr 13 02:38:14 server -- MARK --
Apr 13 02:38:28 server smartd[2145]: Device: /dev/sda, previous 
self-test completed without error
Apr 13 02:38:28 server smartd[2145]: Device: /dev/sdb, previous 
self-test completed without error
Apr 13 02:38:28 server smartd[2145]: Device: /dev/sdc, previous 
self-test completed without error
Apr 13 02:38:28 server smartd[2145]: Device: /dev/hdb, previous 
self-test completed without error
Apr 13 02:58:14 server -- MARK --
Apr 13 03:05:00 server fcron[22625]: Job /var/install/bin/smartmon-plot 
started for user root (pid 22626)
Apr 14 13:42:58 server syslogd 1.5.0: restart.



Apr 15 00:39:31 server pppd[28798]: Exit.
Apr 15 00:39:31 server pptpd[28797]: CTRL: Client 84.143.164.223 control 
connection finished
Apr 15 00:43:12 server smartd[2147]: Device: /dev/sda, SMART Usage 
Attribute: 20
1 Soft_Read_Error_Rate changed from 253 to 100
Apr 15 00:43:12 server smartd[2147]: Device: /dev/sdc, SMART Usage 
Attribute: 20
1 Soft_Read_Error_Rate changed from 253 to 100
Apr 15 01:02:59 server -- MARK --
Apr 15 01:05:00 server fcron[28822]: Job /var/install/bin/smartmon-plot 
started for user root (pid 28823)
Apr 15 07:52:20 server syslogd 1.5.0: restart.



Apr 15 22:03:57 server pppd[19300]: Plugin 
/usr/lib/pptpd/pptpd-logwtmp.so loaded.
Apr 15 22:03:57 server pppd[19300]: pppd 2.4.3 started by root, uid 0
Apr 15 22:03:57 server pppd[19300]: Using interface ppp0
Apr 15 22:03:57 server pppd[19300]: Connect: ppp0 <--> /dev/pts/0
Apr 15 22:03:57 server pptpd[19299]: GRE: Bad checksum from pppd.
Apr 15 22:04:00 server pptpd[19299]: CTRL: Ignored a SET LINK INFO 
packet with real ACCMs!
Apr 15 22:04:00 server pppd[19300]: MPPC/MPPE 128-bit stateless 
compression enabled
Apr 15 22:04:02 server pppd[19300]: found interface eth0 for proxy arp
Apr 15 22:04:02 server pppd[19300]: local  IP address 10.1.1.200
Apr 15 22:04:02 server pppd[19300]: remote IP address 10.1.1.80
Apr 15 22:04:44 server sshd[19302]: Accepted keyboard-interactive/pam 
for root from 10.1.1.80 port 2381 ssh2
Apr 15 22:05:00 server fcron[19319]: Job /var/install/bin/smartmon-plot 
started for user root (pid 19320)
Apr 16 07:34:52 server syslogd 1.5.0: restart.

Die Platten sind nicht voll.
server # df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/md3             1012M  627M  334M  66% /
/dev/md1               23M  8.4M   14M  39% /boot
/dev/md4              293G  182G   96G  66% /data
/dev/sdb1             917G  370G  502G  43% /mnt
/dev/hdb3             294G   65G  214G  24% /old
localhost:/mnt/data   917G  370G  502G  43% /backup

OK, nicht so aussagekräfig, weil gerade neu gestartet.
server # ifconfig
eth0      Link encap:Ethernet  HWaddr 00:24:1D:55:19:25
           inet addr:10.1.1.200  Bcast:10.1.1.255  Mask:255.255.255.0
           inet6 addr: fe80::224:1dff:fe55:1925/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:342050 errors:0 dropped:0 overruns:0 frame:0
           TX packets:424401 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:83290034 (79.4 Mb)  TX bytes:367432805 (350.4 Mb)
           Interrupt:17 Base address:0xc000

lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           inet6 addr: ::1/128 Scope:Host
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:1136 errors:0 dropped:0 overruns:0 frame:0
           TX packets:1136 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:133344 (130.2 Kb)  TX bytes:133344 (130.2 Kb)

ppp0      Link encap:Point-to-Point Protocol
           inet addr:10.1.1.200  P-t-P:10.1.1.80  Mask:255.255.255.255
           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1400  Metric:1
           RX packets:8973 errors:0 dropped:0 overruns:0 frame:0
           TX packets:11421 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:3
           RX bytes:664244 (648.6 Kb)  TX bytes:6362401 (6.0 Mb)


Sonst habe ich nichts Auffälliges gefunden.
Hat jemand einen Tipp, nach was ich suchen könnte?
Welche Info soll ich noch liefern?
Danke und Gruß
Jürgen