[Eisfair] Problem mit sane 1.1.6

[Stefan Puschek]

Moin,

ich habe mir soeben auf dem eis (Kernel 2.4.35SMP, Base 1.8.5) das SANE-Paket 
1.1.6 für meinen HP Scanjet 3670 installiert und kriege den Scanner nicht ans 
scannen.

…
Find scanner

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1405 [HP Scanjet 
Scanner]) at libusb:004:002

Press ENTER to continue 
…

das schaut gut aus.

Aber Punkt 6. Test scanner liefert
…
Test if SANE found the scanner

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1405 [HP Scanjet 
Scanner]) at libusb:004:002


scanimage: open of device genesys:libusb:004:002 failed: Error during device I/O

Press ENTER to continue 
…

und Punkt 8. Scan image liefert

…
Scanner: Hewlett Packard ScanJet 3670c flatbed scanner
on     : genesys:libusb:004:003

Resolution:                                            dpi  
Mode:                                                       
Top-left x position:                                   
Top-left y position:                                   
Width:                                                 
Height:                                                
Image type:                                            
Image name:                                            
Image path:                                            

/var/install/bin/sane_ScanImage: line 145: [: 10: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 20: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 30: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 40: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 50: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 75: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 100: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 150: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 200: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 300: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 600: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 1200: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 2400: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 4800: unary operator expected
/var/install/bin/sane_ScanImage: line 145: [: 9600: unary operator expected
Resolution (y/n)? 
…

welche Resolution soll ich den da bestätigen?

Kann da jemand helfen, damit das Scannen übers Netz irgendwann mal klappt?


Groetjes
Stefan