[Eisfair] USB Drucker unter EIS-2
Pascal Pfau
p-pfau at gmx.de
Mo Jan 23 21:06:36 CET 2012
"Thomas Bork" schrieb im Newsbeitrag
news:jfcssv$2ut$1 at vm-news.spline.inf.fu-berlin.de...
Spiele bitte mal die neue lprng-Version ein und berichte.
--
der tom
[eisfair-team]
So hab ich gemacht. Jetzt ist die version "LPRng 1.16.3" drauf. Leider Ohne
erfolg.
Hier mal meine Konfig. Von LPRng & SAMBA.
#------------------------------------------------------------------------------
# /etc/config.d/lprng - configuration for LPRng on eisfair
#
# Copyright (c) 2002-2010 Thomas Bork, tom(at)eisfair(dot)net
#
# Creation : 2002-10-06 tb
# Last Update: 20.01.2012 tb
#
# Version : 1.16.3
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# General Settings
#
#------------------------------------------------------------------------------
START_LPRNG='yes' # Start on boot: yes or no
#------------------------------------------------------------------------------
# Local parallel Printer Configuration
#
# Set the number of parallel printer to use in
LPRNG_LOCAL_PARPORT_PRINTER_N.
#
# Values below are only an example and are not used if
# LPRNG_LOCAL_PARPORT_PRINTER_N is '0'
#------------------------------------------------------------------------------
LPRNG_LOCAL_PARPORT_PRINTER_N='0' # How many local parallel printers
# do you want to use
LPRNG_LOCAL_PARPORT_PRINTER_1_ACTIVE='no'
# Is this printer active: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_1_IO='0x378'
# This is the io-adress of the
# 1. parallel printer port
LPRNG_LOCAL_PARPORT_PRINTER_1_IRQ='no' # Use interrupt: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_1_COMMENT='1. parallel printer port'
# Comment, Location for NOTIFY
LPRNG_LOCAL_PARPORT_PRINTER_1_NOTIFY='no'
# Send printer messages: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_2_ACTIVE='no'
# Is this printer active: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_2_IO='0x278'
# This is the io-adress of the
# 2. parallel printer port
LPRNG_LOCAL_PARPORT_PRINTER_2_IRQ='no' # Use interrupt: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_2_COMMENT='2. parallel printer port'
# Comment, Location for NOTIFY
LPRNG_LOCAL_PARPORT_PRINTER_2_NOTIFY='no'
# Send printer messages: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_3_ACTIVE='no'
# Is this printer active: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_3_IO='0x3bc'
# This is the io-adress of the
# 3. parallel printerport
LPRNG_LOCAL_PARPORT_PRINTER_3_IRQ='no' # Use interrupt: yes or no
LPRNG_LOCAL_PARPORT_PRINTER_3_COMMENT='3. parallel printer port'
# Comment, Location for NOTIFY
LPRNG_LOCAL_PARPORT_PRINTER_3_NOTIFY='no'
# Send printer messages: yes or no
#------------------------------------------------------------------------------
# Local USB Printer Configuration
#
# Set the number of USB printer to use in LPRNG_LOCAL_USBPORT_PRINTER_N.
#
# Values below are only an example and are not used if
# LPRNG_LOCAL_USBPORT_PRINTER_N is '0'
#------------------------------------------------------------------------------
LPRNG_LOCAL_USBPORT_PRINTER_N='1' # How many local USB printers
# do you want to use
LPRNG_LOCAL_USBPORT_PRINTER_1_ACTIVE='yes'
# Is this printer active: yes or no
LPRNG_LOCAL_USBPORT_PRINTER_1_COMMENT='1. USB printer port'
# Comment, Location for NOTIFY
LPRNG_LOCAL_USBPORT_PRINTER_1_NOTIFY='no'
# Send printer messages: yes or no
LPRNG_LOCAL_USBPORT_PRINTER_2_ACTIVE='no'
# Is this printer active: yes or no
LPRNG_LOCAL_USBPORT_PRINTER_2_COMMENT='2. USB printer port'
# Comment, Location for NOTIFY
LPRNG_LOCAL_USBPORT_PRINTER_2_NOTIFY='no'
# Send printer messages: yes or no
LPRNG_LOCAL_USBPORT_PRINTER_3_ACTIVE='no'
# Is this printer active: yes or no
LPRNG_LOCAL_USBPORT_PRINTER_3_COMMENT='3. USB printer port'
# Comment, Location for NOTIFY
LPRNG_LOCAL_USBPORT_PRINTER_3_NOTIFY='no'
# Send printer messages: yes or no
#------------------------------------------------------------------------------
# Remote Printer Configuration
#
# Set the number of Printer to use in LPRNG_REMOTE_PRINTER_N.
#
# Values below are only an example and are not used if
# LPRNG_REMOTE_PRINTER_N is '0'
#------------------------------------------------------------------------------
LPRNG_REMOTE_PRINTER_N='0' # How many remote printers do you
# want to use
LPRNG_REMOTE_PRINTER_1_ACTIVE='no' # Is this printer active: yes or no
LPRNG_REMOTE_PRINTER_1_IP='192.168.6.99'
# This is the ip of the 1. remote
# printer
LPRNG_REMOTE_PRINTER_1_QUEUENAME='pr1' # This is the queuename of the 1.
# remote printer - read
documentation!
LPRNG_REMOTE_PRINTER_1_PORT='' # This is the port of the 1. remote
# printer - read documentation!
LPRNG_REMOTE_PRINTER_1_COMMENT='1. remote printer port'
# Comment, Location for NOTIFY
LPRNG_REMOTE_PRINTER_1_NOTIFY='no' # Send printer messages: yes or no
LPRNG_REMOTE_PRINTER_2_ACTIVE='no' # Is this printer active: yes or no
LPRNG_REMOTE_PRINTER_2_IP='192.168.6.99'
# This is the ip of the 2. remote
# printer
LPRNG_REMOTE_PRINTER_2_QUEUENAME='pr2' # This is the queuename of the 2.
# remote printer - read
documentation!
LPRNG_REMOTE_PRINTER_2_PORT='' # This is the port of the 2. remote
# printer - read documentation!
LPRNG_REMOTE_PRINTER_2_COMMENT='2. remote printer port'
# Comment, Location for NOTIFY
LPRNG_REMOTE_PRINTER_2_NOTIFY='no' # Send printer messages: yes or no
LPRNG_REMOTE_PRINTER_3_ACTIVE='no' # Is this printer active: yes or no
LPRNG_REMOTE_PRINTER_3_IP='192.168.6.111'
# This is the ip of the 3. remote
# printer
LPRNG_REMOTE_PRINTER_3_QUEUENAME='' # This is the queuename of the 3.
# remote printer - read
documentation!
LPRNG_REMOTE_PRINTER_3_PORT='9100' # This is the port of the 3. remote
# printer - read documentation!
LPRNG_REMOTE_PRINTER_3_COMMENT='3. remote printer port'
# Comment, Location for NOTIFY
LPRNG_REMOTE_PRINTER_3_NOTIFY='no' # Send printer messages: yes or no
LPRNG_REMOTE_PRINTER_4_ACTIVE='no' # Is this printer active: yes or no
LPRNG_REMOTE_PRINTER_4_IP='192.168.6.111'
# This is the ip of the 4. remote
# printer
LPRNG_REMOTE_PRINTER_4_QUEUENAME='' # This is the queuename of the 4.
# remote printer - read
documentation!
LPRNG_REMOTE_PRINTER_4_PORT='9101' # This is the port of the 4. remote
# printer - read documentation!
LPRNG_REMOTE_PRINTER_4_COMMENT='4. remote printer port'
# Comment, Location for NOTIFY
LPRNG_REMOTE_PRINTER_4_NOTIFY='no' # Send printer messages: yes or no
#------------------------------------------------------------------------------
# /etc/config.d/samba - configuration for Samba on eisfair
#
# Copyright (c) 2002-2011 Thomas Bork, tom(at)eisfair(dot)net
#
# Creation : 2002-02-04 tb
# Last Update: 25.09.2011 tb
#
# Version : 1.50.1
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# General Settings
#
# Minimum requirement if SAMBA_MANUAL_CONFIGURATION='no' is to change
# SAMBA_WORKGROUP to workgroup name of your windows clients!
#
#------------------------------------------------------------------------------
START_SAMBA='yes' # Start on boot: yes or no
SAMBA_WORKGROUP='workgroup' # Workgroup name of windows-clients
#------------------------------------------------------------------------------
# Samba Manual or Automatic Configuration
#
# Manual or Automatic Configuration of Shares and Printers
#
# ********************************* ATTENTION
******************************
# *
*
# * If you set SAMBA_MANUAL_CONFIGURATION to 'no', the Settings
*
# * in the Section 'Samba Advanced Configuration/Samba Shares' and
*
# * in the Section 'Samba Advanced Configuration/Samba Printers' and
*
# * in the Section 'Samba Advanced Configuration/Samba Mounts'
*
# * don't have an Effect!
*
# *
*
# ******************************** ATTENTION
*******************************
#
# If you set SAMBA_MANUAL_CONFIGURATION='no', following Shares automatically
# created for you:
#
# - a share with your eisfair-username and full access only for you
# - a share 'public' with full access for all eisfair-users
# - an unvisible share 'all' with full access for user root
# for the whole filesystem
# - shares for your printers in /etc/printcap, if lprng is installed
# - a printer share for eisfax printer, if eisfax is installed
# - a printer share for pdf printing, if ghostscript is installed
#
#------------------------------------------------------------------------------
SAMBA_MANUAL_CONFIGURATION='no' # Use manual configuration:
# yes or no
#------------------------------------------------------------------------------
# Samba Advanced Configuration
#
# Please don't use this, if you are not very familar with Samba!
# Support for this Section is not available!
#
# Special General Settings
# and
# Individual Configuration of Shares, Printers and Mounts
#
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Samba Advanced Configuration/Special General Settings
#------------------------------------------------------------------------------
SAMBA_INTERFACES='' # Userdefined interfaces for Samba
# Be carefull, use this only, if you
# don't want to use all interfaces
from
# /etc/config.d/base
# You have to specify interfaces like
# this: '192.168.7.1/255.255.255.0'
SAMBA_TRUSTED_NETS='' # If your network is 192.168.6.0/24
# and you want to grant access also
# to net 192.168.7.0/24, you have to
# add this here like this:
# '192.168.7.0/24'
SAMBA_DEBUGLEVEL='0' # For debugging only: 0-3
# You will find debug messages in
# /var/log/log.smbd,
/var/log/log.nmbd
SAMBA_MASTERBROWSER='no' # Act as an masterbrowser: yes or no
SAMBA_WINSSERVER='no' # Act as an WINS-Server: yes or no
# If yes, don't set SAMBA_EXTWINSIP!
SAMBA_WINSHOOK='no' # Trigger extra actions, if act as an
# WINS-Server: yes or no
SAMBA_WINSHOOK_MESSAGE_SEND='no' # Send messages to WINS clients:
# yes or no
SAMBA_WINSHOOK_MESSAGE='Welcome to eisfair server'
# This message will diplayed on
# registering to eisfair
SAMBA_WINSHOOK_DNSUPDATE='no' # Updating local bind with WINS
# clients: yes or no
SAMBA_EXTWINSIP='' # IP address of external WINS-Server
# if exist, act as an WINS-Client
# Don't set SAMBA_WINSSERVER to
'yes'!
SAMBA_START_MESSAGE_SEND='no' # Send start message on Samba start:
# yes or no
SAMBA_START_MESSAGE='eisfair Samba Server is up now ...'
# This message will diplayed on start
# on WIN9x-clients with winpopup and
# WIN NT, WIN2K, WINXP
SAMBA_SHUTDOWN_MESSAGE_SEND='no' # Send shutdown message on Samba
shutdown:
# yes or no
SAMBA_SHUTDOWN_MESSAGE='eisfair Samba Server is going down now ...'
# This message will diplayed on
shut-down
# on WIN9x-clients with winpopup and
# WIN NT, WIN2K, WINXP
SAMBA_SHUTDOWN_MESSAGE_HOSTS='all' # Target hosts for
# SAMBA_SHOW_SHUTDOWN_MESSAGE:
# all or active
SAMBA_LOCALIZATION='UTF-8' # Language adjustment, affected to
unix
# character set and client codepage
# US : United States (CP 437)
# ISO8859-1 : Western Europe (CP 850)
# ISO8859-2 : Eastern Europe (CP 852)
# ISO8859-5 : Russian Cyrillic (CP
866)
# ISO8859-7 : Greek (CP 737)
# ISO8859-15: Western Europe with
EURO
# UTF-8: Western Europe
eisfair-2
SAMBA_PDC='no' # Should Samba act as an Primary
Domain
# Controler: yes or no
# Read Documentation!
SAMBA_PDC_PROFILES='yes' # Should Samba store roaming profiles
# if acting as an Primary Domain
# Controler: yes or no
SAMBA_PDC_LOGONSCRIPT='user' # PDC logon script:
# 'user', 'group', 'machines' or
'all'
SAMBA_PASSWORD_SERVER='' # NETBIOS name(s) of external
password
# server(s) separated by a comma and
# a blank. Example:
# SAMBA_PASSWORD_SERVER='NT-PDC,
NT-BDC1'
# If
SAMBA_PASSWORD_SERVER_TYPE='domain'
# ,then you can choose
# SAMBA_PASSWORD_SERVER='*'
# Be shure, you have access from
Samba to
# password server(s)!
SAMBA_PASSWORD_SERVER_TYPE='domain' # Type of external password
server(s):
# domain or server
# If you have an external domain
controler,
# choose 'domain'.
# If you have an normal external NT-
or
# WIN-2K-Server, choose 'server'
SAMBA_RECYCLE_BIN='yes' # Activate recycle bin in shares
SAMBA_RECYCLE_BIN_HOLD_DAYS='14' # Hold files for n days in recycle
bin
SAMBA_PDF_TARGET='homedir' # Target for created pdf files:
# 'homedir', 'public' or 'mail'
SAMBA_SERVERSTRING='' # Comment in network neighborhood:
# empty for no string
# or anything else for your string
SAMBA_EXPERT_EXEC='no' # Exec sambaexpert: yes or no
# Don't ask for help, while
# this is activated!
SAMBA_SMBWEBCLIENT='no' # Install smbwebclient: yes or no
SAMBA_SMBWEBCLIENT_PATH='/var/www/htdocs'
# Install smbwebclient to this apache
# document root
SAMBA_OPLOCKS='no' # activate oplocking (caching): yes
or no
#------------------------------------------------------------------------------
# Samba Advanced Configuration/Samba User Mappings
#
# ********************************* ATTENTION
******************************
# *
*
# * The following Sections only have an Effect,
*
# * if you set SAMBA_MANUAL_CONFIGURATION='yes'
*
# *
*
# ******************************** ATTENTION
*******************************
#
# Definition of Samba User Mappings
#
# Set the number of Samba User Mappings to create in SAMBA_USERMAP_N.
#
# Values below are only an example and are not used if
# SAMBA_USERMAP_N is '0'
#-----------------------------------------------------------------------------
SAMBA_USERMAP_N='2' # How many user mappings do you want
to
# create
SAMBA_USERMAP_1_ACTIVE='yes' # Is this mapping active: yes or no
SAMBA_USERMAP_1_EISNAME='root' # This is the eisfair user name of
the
# 1. mapping
SAMBA_USERMAP_1_WINNAME_N='1' # How many windows names should be
mapped
# to the 1. eisfair user name
SAMBA_USERMAP_1_WINNAME_1='Administrator'
# This is the 1. windows name which
# should be mapped to the 1. eisfair
user
SAMBA_USERMAP_2_ACTIVE='no' # Is this mapping active: yes or no
SAMBA_USERMAP_2_EISNAME='jimknopf' # This is the eisfair user name of
the
# 2. mapping
SAMBA_USERMAP_2_WINNAME_N='2' # How many windows names should be
mapped
# to the 2. eisfair user name
SAMBA_USERMAP_2_WINNAME_1='Jim Knopf' # This is the 1. windows name which
# should be mapped to the 2. eisfair
user
SAMBA_USERMAP_2_WINNAME_2='Jim Jeremy Knopf'
# This is the 2. windows name which
# should be mapped to the 2. eisfair
user
#------------------------------------------------------------------------------
# Samba Advanced Configuration/Samba Shares
#
# ********************************* ATTENTION
******************************
# *
*
# * The following Sections only have an Effect,
*
# * if you set SAMBA_MANUAL_CONFIGURATION='yes'
*
# *
*
# ******************************** ATTENTION
*******************************
#
# Definition of Samba Shares
#
# Set the number of Samba Shares to create in SAMBA_SHARE_N.
#
# Values below are only an example and are not used if
# SAMBA_SHARE_N is '0'
#------------------------------------------------------------------------------
SAMBA_SHARE_N='4' # How many shares you want to create
SAMBA_SHARE_1_ACTIVE='no' # Is this share active: yes or no
SAMBA_SHARE_1_NAME='homes' # This is the name of the 1. share
SAMBA_SHARE_1_COMMENT='home directory on %h'
# Comment of the 1. share
SAMBA_SHARE_1_RW='yes' # Should share writeable: yes or no
SAMBA_SHARE_1_BROWSE='no' # Should share browseable: yes or no
SAMBA_SHARE_1_PATH='%H' # Path of the share in filesystem
SAMBA_SHARE_1_USER='%S' # Allowed user/groups for 1. share
SAMBA_SHARE_1_PUBLIC='no' # Share accessable for all: yes or no
SAMBA_SHARE_1_READ_LIST='' # Share only readable for
SAMBA_SHARE_1_WRITE_LIST='' # Share only writeable for
SAMBA_SHARE_1_FORCE_CMODE='0600' # Rights for created files
SAMBA_SHARE_1_FORCE_DIRMODE='0700' # Rights for created directories
SAMBA_SHARE_1_FORCE_USER='' # User for all file operations
SAMBA_SHARE_1_FORCE_GROUP='' # Group for all file operations
SAMBA_SHARE_2_ACTIVE='no' # Is this share active: yes or no
SAMBA_SHARE_2_NAME='all' # This is the name of the 2. share
SAMBA_SHARE_2_COMMENT='complete filesystem on %h'
# Comment of the 2. share
SAMBA_SHARE_2_RW='yes' # Should share writeable: yes or no
SAMBA_SHARE_2_BROWSE='no' # Should share browseable: yes or no
SAMBA_SHARE_2_PATH='/' # Path of the share in filesystem
SAMBA_SHARE_2_USER='root' # Allowed user/groups for 2. share
SAMBA_SHARE_2_PUBLIC='no' # Share accessable for all: yes or no
SAMBA_SHARE_2_READ_LIST='' # Share only readable for
SAMBA_SHARE_2_WRITE_LIST='' # Share only writeable for
SAMBA_SHARE_2_FORCE_CMODE='0700' # Rights for created files
SAMBA_SHARE_2_FORCE_DIRMODE='0700' # Rights for created directories
SAMBA_SHARE_2_FORCE_USER='' # User for all file operations
SAMBA_SHARE_2_FORCE_GROUP='' # Group for all file operations
SAMBA_SHARE_3_ACTIVE='no' # Is this share active: yes or no
SAMBA_SHARE_3_NAME='public' # This is the name of the 3. share
SAMBA_SHARE_3_COMMENT='public directory on %h'
# Comment of the 3. share
SAMBA_SHARE_3_RW='yes' # Should share writeable: yes or no
SAMBA_SHARE_3_BROWSE='yes' # Should share browseable: yes or no
SAMBA_SHARE_3_PATH='/public' # Path of the share in filesystem
SAMBA_SHARE_3_USER='' # Allowed user/groups for 3. share
SAMBA_SHARE_3_PUBLIC='yes' # Share accessable for all: yes or no
SAMBA_SHARE_3_READ_LIST='' # Share only readable for
SAMBA_SHARE_3_WRITE_LIST='' # Share only writeable for
SAMBA_SHARE_3_FORCE_CMODE='0777' # Rights for created files
SAMBA_SHARE_3_FORCE_DIRMODE='0777' # Rights for created directories
SAMBA_SHARE_3_FORCE_USER='' # User for all file operations
SAMBA_SHARE_3_FORCE_GROUP='' # Group for all file operations
SAMBA_SHARE_4_ACTIVE='no' # Is this share active: yes or no
SAMBA_SHARE_4_NAME='www' # This is the name of the 4. share
SAMBA_SHARE_4_COMMENT='doc root on %h' # Comment of the 4. share
SAMBA_SHARE_4_RW='yes' # Should share writeable: yes or no
SAMBA_SHARE_4_BROWSE='yes' # Should share browseable: yes or no
SAMBA_SHARE_4_PATH='/var/www/htdocs' # Path of the share in filesystem
SAMBA_SHARE_4_USER='+www wwwrun' # Allowed user/groups for 4. share
SAMBA_SHARE_4_PUBLIC='no' # Share accessable for all: yes or no
SAMBA_SHARE_4_READ_LIST='' # Share only readable for
SAMBA_SHARE_4_WRITE_LIST='' # Share only writeable for
SAMBA_SHARE_4_FORCE_CMODE='0677' # Rights for created files
SAMBA_SHARE_4_FORCE_DIRMODE='0744' # Rights for created directories
SAMBA_SHARE_4_FORCE_USER='wwwrun' # User for all file operations
SAMBA_SHARE_4_FORCE_GROUP='nogroup' # Group for all file operations
#------------------------------------------------------------------------------
# Samba Advanced Configuration/Samba DFS Roots
#
# ********************************* ATTENTION
******************************
# *
*
# * The following Sections only have an Effect,
*
# * if you set SAMBA_MANUAL_CONFIGURATION='yes'
*
# *
*
# ********************************* ATTENTION
******************************
#
# Definition of Samba DFS Roots
#
# Set the number of Samba DFS Roots to create in SAMBA_DFSROOT_N.
#
# Values below are only an example and are not used if
# SAMBA_DFSROOT_N is '0'
#------------------------------------------------------------------------------
SAMBA_DFSROOT_N='1' # How many DFS roots do you want
SAMBA_DFSROOT_1_ACTIVE='no' # Activate this DFS root: yes or no
SAMBA_DFSROOT_1_NAME='dfs1' # This is the name of the . DFS root
SAMBA_DFSROOT_1_COMMENT='' # Comment of the . DFS root
SAMBA_DFSROOT_1_RW='yes' # Should DFS root be writeable: yes
or no
SAMBA_DFSROOT_1_BROWSE='yes' # Should DFS root be browseable: yes
or no
SAMBA_DFSROOT_1_USER='' # Allowed user/groups for this DFS
root
SAMBA_DFSROOT_1_PUBLIC='yes' # DFS root accessable for all: yes or
no
SAMBA_DFSROOT_1_READ_LIST='' # DFS root only readable for
SAMBA_DFSROOT_1_WRITE_LIST='' # DFS root only writeable for
SAMBA_DFSROOT_1_FORCE_CMODE='' # Rights for created files
SAMBA_DFSROOT_1_FORCE_DIRMODE='' # Rights for created directories
SAMBA_DFSROOT_1_FORCE_USER='' # User for all file operations
SAMBA_DFSROOT_1_FORCE_GROUP='' # Group for all file operations
SAMBA_DFSROOT_1_DFSLNK_N='1' # How many links should be created
SAMBA_DFSROOT_1_DFSLNK_1_ACTIVE='yes' # Should this link active: yes or no
SAMBA_DFSROOT_1_DFSLNK_1_SUBPATH='' # Sub directory for this link
SAMBA_DFSROOT_1_DFSLNK_1_NAME='users' # Name of the link
SAMBA_DFSROOT_1_DFSLNK_1_UNC_N='1' # How many unc pathes should be
created
SAMBA_DFSROOT_1_DFSLNK_1_UNC_1_PATH='\\userserver1\users'
# unc path for this link
#------------------------------------------------------------------------------
# Samba Advanced Configuration/Samba Printers
#
# ********************************* ATTENTION
******************************
# *
*
# * The following Sections only have an Effect,
*
# * if you set SAMBA_MANUAL_CONFIGURATION='yes'
*
# *
*
# ********************************* ATTENTION
******************************
#
# Definition of Samba Printers
#
# Set the number of Samba Printers to use in SAMBA_PRINTER_N.
#
# Values below are only an example and are not used if
# SAMBA_PRINTER_N is '0'
#------------------------------------------------------------------------------
SAMBA_PRINTER_N='6' # How many printers you want to use
SAMBA_PRINTER_1_ACTIVE='no' # Is this printer active: yes or no
SAMBA_PRINTER_1_NAME='laserjet' # This is the name of the 1. printer
SAMBA_PRINTER_1_TYPE='printcap' # Type of the 1. printer
SAMBA_PRINTER_1_PDF_QUALITY='' # Quality of pdf files
SAMBA_PRINTER_1_PDF_OWNERPASS='' # Password for editing PDF files
SAMBA_PRINTER_1_PDF_USERPASS='' # Password for opening PDF files
SAMBA_PRINTER_1_PDF_PERMS='' # Permissions for PDF files
SAMBA_PRINTER_1_PDF_MESSAGES='yes' # Messages for PDF files: yes or no
SAMBA_PRINTER_1_CAPNAME='pr1' # The name of the 1. printer in
# /etc/printcap
SAMBA_PRINTER_1_COMMENT='laserjet on %h'
# Comment of the 1. printer
SAMBA_PRINTER_1_CLIENTDRIVER='yes' # Use clientdriver for the 1.
printer:
# yes or no
SAMBA_PRINTER_1_BROWSE='yes' # Should printer browseable: yes or
no
SAMBA_PRINTER_1_USER='' # Allowed user/groups for 1. printer
SAMBA_PRINTER_1_PUBLIC='yes' # Printer accessable for all: yes or
no
SAMBA_PRINTER_2_ACTIVE='no' # Is this printer active: yes or no
SAMBA_PRINTER_2_NAME='epson' # This is the name of the 2. printer
SAMBA_PRINTER_2_TYPE='printcap' # Type of the 2. printer
SAMBA_PRINTER_2_PDF_QUALITY='' # Quality of pdf files
SAMBA_PRINTER_2_PDF_OWNERPASS='' # Password for editing PDF files
SAMBA_PRINTER_2_PDF_USERPASS='' # Password for opening PDF files
SAMBA_PRINTER_2_PDF_PERMS='' # Permissions for PDF files
SAMBA_PRINTER_2_PDF_MESSAGES='yes' # Messages for PDF files: yes or no
SAMBA_PRINTER_2_CAPNAME='pr2' # The name of the 2. printer
# in /etc/printcap
SAMBA_PRINTER_2_COMMENT='epson on %h' # Comment of the 2. local printer
SAMBA_PRINTER_2_CLIENTDRIVER='yes' # Use clientdriver for the 2.
printer:
# yes or no
SAMBA_PRINTER_2_BROWSE='yes' # Should printer browseable: yes or
no
SAMBA_PRINTER_2_USER='user1 user2' # Allowed user/groups for 2. printer
SAMBA_PRINTER_2_PUBLIC='no' # Printer accessable for all: yes or
no
SAMBA_PRINTER_3_ACTIVE='no' # Is this printer active: yes or no
SAMBA_PRINTER_3_NAME='canon' # This is the name of the 3. printer
SAMBA_PRINTER_3_TYPE='printcap' # Type of the 3. printer
SAMBA_PRINTER_3_PDF_QUALITY='' # Quality of pdf files
SAMBA_PRINTER_3_PDF_OWNERPASS='' # Password for editing PDF files
SAMBA_PRINTER_3_PDF_USERPASS='' # Password for opening PDF files
SAMBA_PRINTER_3_PDF_PERMS='' # Permissions for PDF files
SAMBA_PRINTER_3_PDF_MESSAGES='yes' # Messages for PDF files: yes or no
SAMBA_PRINTER_3_CAPNAME='repr1' # The name of the 3. printer
# in /etc/printcap
SAMBA_PRINTER_3_COMMENT='canon on %h' # Comment of the 3. printer
SAMBA_PRINTER_3_CLIENTDRIVER='yes' # Use clientdriver for the 3.
printer:
# yes or no
SAMBA_PRINTER_3_BROWSE='yes' # Should printer browseable: yes or
no
SAMBA_PRINTER_3_USER='+users' # Allowed user/groups for 3rd printer
SAMBA_PRINTER_3_PUBLIC='no' # Printer accessable for all: yes or
no
SAMBA_PRINTER_4_ACTIVE='no' # Is this printer active: yes or no
SAMBA_PRINTER_4_NAME='eisfax' # This is the name of the 4. printer
SAMBA_PRINTER_4_TYPE='fax' # Type of the 4. printer
SAMBA_PRINTER_4_PDF_QUALITY='' # Quality of pdf files
SAMBA_PRINTER_4_PDF_OWNERPASS='' # Password for editing PDF files
SAMBA_PRINTER_4_PDF_USERPASS='' # Password for opening PDF files
SAMBA_PRINTER_4_PDF_PERMS='' # Permissions for PDF files
SAMBA_PRINTER_4_PDF_MESSAGES='yes' # Messages for PDF files: yes or no
SAMBA_PRINTER_4_CAPNAME='' # The name of the 4. printer
# in /etc/printcap
SAMBA_PRINTER_4_COMMENT='eisfax on %h' # Comment of the 4. printer
SAMBA_PRINTER_4_CLIENTDRIVER='yes' # Use clientdriver for the 4.
printer:
# yes or no
SAMBA_PRINTER_4_BROWSE='yes' # Should printer browseable: yes or
no
SAMBA_PRINTER_4_USER='' # Allowed user/groups for 4. printer
SAMBA_PRINTER_4_PUBLIC='yes' # Printer accessable for all: yes or
no
SAMBA_PRINTER_5_ACTIVE='no' # Is this printer active: yes or no
SAMBA_PRINTER_5_NAME='pdf-def' # This is the name of the 5. printer
SAMBA_PRINTER_5_TYPE='pdf' # Type of the 5. printer
SAMBA_PRINTER_5_PDF_QUALITY='default' # Quality of pdf files
SAMBA_PRINTER_5_PDF_OWNERPASS='' # Password for editing PDF files
SAMBA_PRINTER_5_PDF_USERPASS='' # Password for opening PDF files
SAMBA_PRINTER_5_PDF_PERMS='' # Permissions for PDF files
SAMBA_PRINTER_5_PDF_MESSAGES='yes' # Messages for PDF files: yes or no
SAMBA_PRINTER_5_CAPNAME='' # The name of the 5. printer
# in /etc/printcap
SAMBA_PRINTER_5_COMMENT='pdf default on %h'
# Comment of the 5. printer
SAMBA_PRINTER_5_CLIENTDRIVER='yes' # Use clientdriver for the 5.
printer:
# yes or no
SAMBA_PRINTER_5_BROWSE='yes' # Should printer browseable: yes or
no
SAMBA_PRINTER_5_USER='' # Allowed user/groups for 5. printer
SAMBA_PRINTER_5_PUBLIC='yes' # Printer accessable for all: yes or
no
SAMBA_PRINTER_6_ACTIVE='no' # Is this printer active: yes or no
SAMBA_PRINTER_6_NAME='pdf-pre' # This is the name of the 6. printer
SAMBA_PRINTER_6_TYPE='pdf' # Type of the 6. printer
SAMBA_PRINTER_6_PDF_QUALITY='prepress' # Quality of pdf files
SAMBA_PRINTER_6_PDF_OWNERPASS='' # Password for editing PDF files
SAMBA_PRINTER_6_PDF_USERPASS='' # Password for opening PDF files
SAMBA_PRINTER_6_PDF_PERMS='' # Permissions for PDF files
SAMBA_PRINTER_6_PDF_MESSAGES='yes' # Messages for PDF files: yes or no
SAMBA_PRINTER_6_CAPNAME='' # The name of the 6. printer
# in /etc/printcap
SAMBA_PRINTER_6_COMMENT='pdf prepress on %h'
# Comment of the 6. printer
SAMBA_PRINTER_6_CLIENTDRIVER='yes' # Use clientdriver for the 6.
printer:
# yes or no
SAMBA_PRINTER_6_BROWSE='yes' # Should printer browseable: yes or
no
SAMBA_PRINTER_6_USER='' # Allowed user/groups for 6. printer
SAMBA_PRINTER_6_PUBLIC='yes' # Printer accessable for all: yes or
no
#------------------------------------------------------------------------------
# Samba Advanced Configuration/Samba Mounts
#
# ********************************* ATTENTION
******************************
# *
*
# * The following Sections only have an Effect,
*
# * if you set SAMBA_MANUAL_CONFIGURATION='yes'
*
# *
*
# ********************************* ATTENTION
******************************
#
# Definition of Samba Mounts
#
# Set the number of Samba Mounts to use in SAMBA_MOUNT_N.
#
# Values below are only an example and are not used if
# SAMBA_MOUNT_N is '0'
#------------------------------------------------------------------------------
SAMBA_MOUNT_N='2' # How many remote shares you want to
mount
SAMBA_MOUNT_1_ACTIVE='no' # Is this mount active: yes or no
SAMBA_MOUNT_1_VFSTYPE='smbfs' # The virtual file system type
SAMBA_MOUNT_1_SERVER='fli4l' # The netbios name of the 1. server
SAMBA_MOUNT_1_SHARE='share1' # The name of the 1. share to mount
SAMBA_MOUNT_1_POINT='/mountpoint1' # Where you want to mount the share
SAMBA_MOUNT_1_USER='' # The user name for share access
SAMBA_MOUNT_1_PASS='' # The password for share access
SAMBA_MOUNT_1_RW='yes' # Should share writeable: yes or no
SAMBA_MOUNT_1_UID='' # Mount share with uid/username
SAMBA_MOUNT_1_GID='' # Mount share with gid/groupname
SAMBA_MOUNT_1_FMASK='' # Mount share with file umask
SAMBA_MOUNT_1_DMASK='' # Mount share with directory umask
SAMBA_MOUNT_1_IOCHARSET='' # Mount share with linux charset
SAMBA_MOUNT_1_CODEPAGE='' # Mount with server codepage (only
smbfs)
SAMBA_MOUNT_2_ACTIVE='no' # Is this mount active: yes or no
SAMBA_MOUNT_2_VFSTYPE='smbfs' # The virtual file system type
SAMBA_MOUNT_2_SERVER='ente' # The netbios name of the 1. server
SAMBA_MOUNT_2_SHARE='downloads' # The name of the 1. share to mount
SAMBA_MOUNT_2_POINT='/mountpoint2' # Where you want to mount the share
SAMBA_MOUNT_2_USER='king' # The user name for share access
SAMBA_MOUNT_2_PASS='kong' # The password for share access
SAMBA_MOUNT_2_RW='yes' # Should share writeable: yes or no
SAMBA_MOUNT_2_UID='root' # Mount share with uid/username
SAMBA_MOUNT_2_GID='root' # Mount share with gid/groupname
SAMBA_MOUNT_2_FMASK='0777' # Mount share with file umask
SAMBA_MOUNT_2_DMASK='0777' # Mount share with directory umask
SAMBA_MOUNT_2_IOCHARSET='iso8859-1' # Mount share with linux charset
SAMBA_MOUNT_2_CODEPAGE='cp850' # Mount with server codepage (only
smbfs)
Mehr Informationen über die Mailingliste Eisfair