[Fli4l_dev] Informationen zu den wöchentlichen 4.0-Archiven vom 24.03.2017 (r47533)

Sebastian Klein fli4l at wysiwyng.de
Do Mär 30 12:58:13 CEST 2017


Moin Boris,

>>
>> # configure disabled interface
>> phyint lo disabled
>> phyint eth0 disabled
>> phyint eth1 disabled
>> phyint eth1.7 disabled
>> phyint dummy0 disabled
>> phyint ppp1 disabled
>>
> 
> Ich habe die Datei wie gewünscht geändert, den igmp gekilled und neu 
> gestartet.
> Das Log sieht (für mich) unverändert aus.
> Bin nicht vor Ort, so dass das Fernsehen testen kann, gehe aber davon 
> aus, dass es nicht funktioniert.
> 
> Nachfolgend das Log.
> 
> igmpproxy[9252]: Searching for config file at '/etc/igmpproxy.conf'
> igmpproxy[9252]: Config: Quick leave mode enabled.
> igmpproxy[9252]: Config: Got a phyint token.
> igmpproxy[9252]: Config: IF: Config for interface eth1.8.
> igmpproxy[9252]: Config: IF: Got upstream token.
> igmpproxy[9252]: Config: IF: Got ratelimit token '0'.
> igmpproxy[9252]: Config: IF: Got threshold token '1'.
> igmpproxy[9252]: Config: IF: Got altnet token 239.35.0.0/16.
> igmpproxy[9252]: Config: IF: Altnet: Parsed altnet to 239.35/16.
> igmpproxy[9252]: Config: IF: Got altnet token 217.0.119.0/24.
> igmpproxy[9252]: Config: IF: Altnet: Parsed altnet to 217.0.119/24.
> igmpproxy[9252]: Config: IF: Got altnet token 193.158.34.0/23.
> igmpproxy[9252]: Config: IF: Altnet: Parsed altnet to 193.158.34/23.
> igmpproxy[9252]: IF name : eth1.8
> igmpproxy[9252]: Next ptr : 0
> igmpproxy[9252]: Ratelimit : 0
> igmpproxy[9252]: Threshold : 1
> igmpproxy[9252]: State : 1
> igmpproxy[9252]: Allowednet ptr : 8db82b0
> igmpproxy[9252]: Config: Got a phyint token.
> igmpproxy[9252]: Config: IF: Config for interface eth2.
> igmpproxy[9252]: Config: IF: Got downstream token.
> igmpproxy[9252]: Config: IF: Got ratelimit token '0'.
> igmpproxy[9252]: Config: IF: Got threshold token '1'.
> igmpproxy[9252]: Config: IF: Got whitelist token 239.35.0.0/16.
> igmpproxy[9253]: select() failure; Errno(14): Bad address
> igmpproxy[9253]: select() failure; Errno(14): Bad address

Letzte Idee die ich noch habe ist der Whitelist-Eintrag, evtl.
 stört der ja...


> Das Logfile sieht ganz anders aus und ist auch viel kürzer.
> Hilft uns bzw. euch das weiter?

Mir leider nicht...

Bin gerade auch nur am Handy da auf der Arbeit...

--
Sebastian Klein
[fli4l-team]


----Android NewsGroup Reader----
http://usenet.sinaapp.com/


Mehr Informationen über die Mailingliste Fli4l_dev