[Fli4l_dev] Informationen zu den wöchentlichen 4.0-Archiven vom 24.03.2017 (r47533)

B. Sprenger b.sprenger at sprenger-ffm.de
So Apr 9 20:37:11 CEST 2017


Hallo Sebastian,
>> Hat noch jemand eine gute Idee?
>> Ich tippe auf irgend ein "Ding" mit der Konfiguration des Netzwerks.
>
> wie hast du denn das hier verknotet:
>
> IP_NET[3]='{IPTV}'
>
> also will sagen wird das richtig "aufgelöst" oder wie bekommt das IF
> seine IP?

Das Interface bekommt seine IP-Adresse per DHCP zugewiesen.
eth1.8 wird ja nicht zwangsgetrennt.
Der entsprechende Eintrag in circuits.txt sieht so aus:


CIRC[] {
   NAME='IPTV'                # circuit name, don't use spaces
   TYPE='dhcp'                # this is a DHCP circuit
   ENABLED='yes'              # the circuit is enabled
   CLASS[]='Fernsehen'        # set meaningful class
   NETS_IPV4[]='193.158.34.0/23'
                              # use default IPv4 route over this circuit
   USEPEERDNS='no'         # use dns server of your provider: yes or no
   UP='yes'                   # activate at boot time (OPT_IMOND='no')
   WAIT='15'                  # wait max. 15 seconds for an IP address to
                              # be assigned before continuing the boot
                              # process; if '0' (the default), the boot
                              # process continues immediately
   DHCP_DAEMON='dhcpcd'       # choose the DHCP program to use; if you
                              # don't specify this, some default will be
                              # chosen (currently dhcpcd)
   DHCP_DEV='IP_NET_3_DEV'
#  DHCP_HOSTNAME=''          # Transfer a specific host-id to provider
   DHCP_STARTDELAY='0'        # Time [sec] to wait before the client is
                              # started
      }

Die 15 Sekunden bei WAIT sind bei irgend einem Problem in der 
Vergangenheit da mal rein gewandert.
Vielleicht werden die gar nicht mehr benötigt, aber das kann ja nicht 
die Ursache sein.

Und in dns_dhcp.txt steht natürlich:
#------------------------------------------------------------------------------
# Optional package: DHCP client
#------------------------------------------------------------------------------
OPT_DHCP_CLIENT='yes'           # install DHCP client: yes, no


Ich muss die nächsten Tage noch mal einen Quercheck machen.
Ich meine mir wäre ein Unterschied zwischen r45569 und r47533 
aufgefallen in der Darstellung des httpd unter:
Support => Systeminformation => Netzwerkschnittstellen
Vielleicht kommen wir dann weiter.

Aber ich nehme natürlich auch gerne weitere Lösungsansätze entgegen :-)

LG
Boris



Mehr Informationen über die Mailingliste Fli4l_dev