[Fli4l_dev] OPT_WLAN B?==?utf-8?Q?ug?

Marc-Oliver Lange mol1 at gmx.de
Fr Nov 4 22:17:28 CET 2016


Hallo Sebastian,
hier mal ein paar infos mehr. :)

butterfly schrieb am Fr, 04 November 2016 10:55
> das du die Channel nicht nutzen kannst liegt an unterschiedlichen
> Dingen:
> 
> - Kanal 13 kann evtl. mit der Region zu tun haben. Die ath* Karten
> sind
> da manchmal ein wenig komisch siehe dazu auch OPT_FLASHROM in tools
> und
> google spuckt in dem Zusammenhang einiges aus.

Dafür verstehe ich entweder das OPT nicht oder ich habe gerade keinen
plan was ich das google soll.
https://www.google.de/?gws_rd=ssl#q=OPT_FLASHROM???

butterfly schrieb am Fr, 04 November 2016 10:55
> änder mal händisch die /etc/hostapd.wlan0
> so das dies hier alles drin steht (Reihenfolge egal):
> 
> ieee80211n=1
> hw_mode=a
> ieee80211ac=1
> ieee80211d=1
> ieee80211h=1
> 
> und den Kanal änder mal auf
> channel=0
> 
> und starte dann auf der Konsole:
> 
> usr/sbin/hostapd /etc/hostapd.wlan0
> 
> damit sollte er sich dann selbstständig einen Kanal im 5GHz suchen
> der
> frei ist.

Habe ich getan mit folgenden Ergebnis:
4.0.0-r46566-testing # usr/sbin/hostapd /etc/hostapd.wlan0
Configuration file: /etc/hostapd.wlan0
Cannot enable IEEE 802.11d without setting the country_code
1 errors found in configuration file '/etc/hostapd.wlan0'
Failed to set up interface with /etc/hostapd.wlan0
Failed to initialize interface

Das habe ich noch 
country_code=DE
eingefugt und erneut gestartet....Ergebnis: :)

Configuration file: /etc/hostapd.wlan0
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
ACS: Automatic channel selection started, this may take a bit
wlan0: interface state COUNTRY_UPDATE->ACS
wlan0: ACS-STARTED
wlan0: ACS-COMPLETED freq=5825 channel=165
Using interface wlan0 with hwaddr xx:xx:xx:xx:xx:xx and ssid "BeHappy"
wlan0: interface state ACS->ENABLED
wlan0: AP-ENABLED

Dann ist das WLan nur noch für die IOS Geräte verfügbar!? Geschätz
wegen channel 165. 
Aber ein erneutet Versucvh mit Channel 104
butterfly schrieb am Fr, 04 November 2016 10:55
> interessant wäre auch noch der output von: "iw list"

4.0.0-r46566-testing # iw list
Wiphy phy1
        max # scan SSIDs: 4
        max scan IEs length: 2285 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports RSN-IBSS.
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP (00-0f-ac:4)
                * 00-0f-ac:10
                * GCMP (00-0f-ac:8)
                * 00-0f-ac:9
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * WDS
                 * monitor
        Band 1:
                Bitrates (non-HT):
                        * 1.0 Mbps
                        * 2.0 Mbps (short preamble supported)
                        * 5.5 Mbps (short preamble supported)
                        * 11.0 Mbps (short preamble supported)
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (disabled)
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * start_ap
                 * new_station
                 * set_bss
                 * authenticate
                 * associate
                 * deauthenticate
                 * disassociate
                 * join_ibss
                 * set_tx_bitrate_mask
                 * frame
                 * frame_wait_cancel
                 * set_wiphy_netns
                 * set_channel
                 * set_wds_peer
                 * probe_client
                 * set_noack_map
                 * register_beacons
                 * start_p2p_device
                 * set_mcast_rate
                 * set_qos_map
                 * connect
                 * disconnect
        Supported TX frame types:
                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70
0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70
0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70
0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
        Supported RX frame types:
                 * IBSS: 0x40 0xb0 0xc0 0xd0
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * mesh point: 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-device: 0x40 0xd0
        software interface modes (can always be added):
                 * AP/VLAN
                 * monitor
        valid interface combinations:
                 * #{ AP } <= 4,
                   total <= 4, #channels <= 1
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Device supports TX status socket option.
        Device supports HT-IBSS.
        Device supports SAE with AUTHENTICATE command
        Device supports low priority scan.
        Device supports scan flush.
        Device supports AP scan.
        Device supports per-vif TX power setting
        Driver supports a userspace MPM
        Device supports configuring vdev MAC-addr on create.
Wiphy phy0
        max # scan SSIDs: 16
        max scan IEs length: 195 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP (00-0f-ac:4)
                * CMAC (00-0f-ac:6)
        Available Antennas: TX 0x3 RX 0x3
        Configured Antennas: TX 0x3 RX 0x3
        Supported interface modes:
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
        Band 1:
                Capabilities: 0x19e3
                        RX LDPC
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 7935 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-15
                VHT Capabilities (0x338001b2):
                        Max MPDU length: 11454
                        Supported Channel Width: neither 160 nor 80+80
                        RX LDPC
                        short GI (80 MHz)
                        TX STBC
                        RX antenna pattern consistency
                        TX antenna pattern consistency
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Bitrates (non-HT):
                        * 1.0 Mbps
                        * 2.0 Mbps
                        * 5.5 Mbps
                        * 11.0 Mbps
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (disabled)
                        * 2472 MHz [13] (disabled)
                        * 2484 MHz [14] (disabled)
        Band 2:
                Capabilities: 0x19e3
                        RX LDPC
                        HT20/HT40
                        Static SM Power Save
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 7935 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-15
                VHT Capabilities (0x338001b2):
                        Max MPDU length: 11454
                        Supported Channel Width: neither 160 nor 80+80
                        RX LDPC
                        short GI (80 MHz)
                        TX STBC
                        RX antenna pattern consistency
                        TX antenna pattern consistency
                VHT RX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT RX highest supported: 0 Mbps
                VHT TX MCS set:
                        1 streams: MCS 0-9
                        2 streams: MCS 0-9
                        3 streams: not supported
                        4 streams: not supported
                        5 streams: not supported
                        6 streams: not supported
                        7 streams: not supported
                        8 streams: not supported
                VHT TX highest supported: 0 Mbps
                Bitrates (non-HT):
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 5180 MHz [36] (20.0 dBm)
                        * 5200 MHz [40] (20.0 dBm)
                        * 5220 MHz [44] (20.0 dBm)
                        * 5240 MHz [48] (20.0 dBm)
                        * 5260 MHz [52] (20.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5280 MHz [56] (20.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5300 MHz [60] (20.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5320 MHz [64] (20.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5500 MHz [100] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5520 MHz [104] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5540 MHz [108] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5560 MHz [112] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5580 MHz [116] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5600 MHz [120] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5620 MHz [124] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5640 MHz [128] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5660 MHz [132] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5680 MHz [136] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5700 MHz [140] (23.0 dBm) (no IR, radar
detection)
                          DFS state: usable (for 75452 sec)
                          DFS CAC time: 60000 ms
                        * 5745 MHz [149] (13.0 dBm)
                        * 5765 MHz [153] (13.0 dBm)
                        * 5785 MHz [157] (13.0 dBm)
                        * 5805 MHz [161] (13.0 dBm)
                        * 5825 MHz [165] (13.0 dBm)
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * start_ap
                 * new_station
                 * set_bss
                 * authenticate
                 * associate
                 * deauthenticate
                 * disassociate
                 * join_ibss
                 * remain_on_channel
                 * set_tx_bitrate_mask
                 * frame
                 * frame_wait_cancel
                 * set_wiphy_netns
                 * set_channel
                 * set_wds_peer
                 * probe_client
                 * set_noack_map
                 * register_beacons
                 * start_p2p_device
                 * set_mcast_rate
                 * channel_switch
                 * set_qos_map
                 * connect
                 * disconnect
        Supported TX frame types:
                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90
0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70
0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70
0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80
0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70
0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
        Supported RX frame types:
                 * IBSS: 0x40 0xb0 0xc0 0xd0
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * mesh point: 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-device: 0x40 0xd0
        software interface modes (can always be added):
                 * AP/VLAN
                 * monitor
        valid interface combinations:
                 * #{ AP } <= 8,
                   total <= 8, #channels <= 1, STA/AP BI must match
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Device supports TX status socket option.
        Device supports HT-IBSS.
        Device supports SAE with AUTHENTICATE command
        Device supports scan flush.
        Device supports per-vif TX power setting
        Driver supports a userspace MPM
        Driver/device bandwidth changes during BSS lifetime (AP/GO
mode)
        Device supports static SMPS
        Device supports configuring vdev MAC-addr on create.
		
Hoffe das dir das mehr sagt als mir. Wenn ich noch weiter testen kann
sag gerne bescheid.
VG
Marco


Mehr Informationen über die Mailingliste Fli4l_dev