[Fli4l_dev] Änderungen an OPT-HD
Ulrich Walter
stan.dard.mail at arcor.de
Sa Jan 19 14:08:23 CET 2013
Robert Resch schrieb:
> Am 18.01.2013 21:54, schrieb Ulrich Walter:
>> Roland Franke schrieb:
>>
>>> Hallo Ulrich,
>>>
>>>> Robert Resch wrote:
>>>>
>>>>> Am 03.01.2013 21:48, schrieb Ulrich Walter:
...
> Gib mir bitte folgende Info von einer Version kurz davor:
>
> lsmod (geladene Module)
fli4l 3.9.0-rev24502 # lsmod
Module Size Used by Not tainted
evdev 16433 2
tun 16464 4
xt_mac 12337 2
ipt_MASQUERADE 12337 1
xt_length 12337 1
xt_TCPMSS 12337 1
xt_tcpudp 12337 6
xt_state 12337 12
xt_comment 12337 180
ipt_REJECT 12337 31
xt_LOG 16433 4
xt_limit 12337 9
iptable_nat 12406 1
nf_nat 17051 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 12373 15 iptable_nat,nf_nat
nf_defrag_ipv4 12375 1 nf_conntrack_ipv4
nf_conntrack 40420 5
ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_filter 12337 1
ip_tables 16574 2 iptable_nat,iptable_filter
x_tables 17318 13
xt_mac,ipt_MASQUERADE,xt_length,xt_TCPMSS,xt_tcpudp,xt_state,xt_comment,ipt_REJECT,xt_LOG,xt_limit,iptable_nat,iptable_filter,ip_tables
pppoe 12337 2
pppox 12475 1 pppoe
ppp_generic 20915 6 pppoe,pppox
slhc 12476 1 ppp_generic
8139too 20529 0
3c59x 32817 0
mii 12569 2 8139too,3c59x
button 12455 0
rtc_cmos 16433 1
nls_iso8859_1 12337 1
ata_generic 12337 2
libata 119695 1 ata_generic
sr_mod 16852 0
cdrom 33254 1 sr_mod
sd_mod 28721 3
scsi_mod 100487 3 libata,sr_mod,sd_mod
isofs 29081 0
ext3 92930 1
jbd 39713 1 ext3
mbcache 12702 1 ext3
pcspkr 12337 0
>
> sowie dmesg
>
> ggf. auch per PM, falls es dir für die NG zu groß wird.
> dmesg kannst ab den Netzwerkkarten kappen - die brauch ich nimmer.
Linux version 3.6.10 (fli4l at eisler) (gcc version 4.6.3 (Ubuntu/Linaro
4.6.3-1ubuntu5) ) #1 SMP Mon Dec 10 21:25:34 CET 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fe76fff] usable
BIOS-e820: [mem 0x000000000fe77000-0x000000000fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.3 present.
DMI: Dell Computer Corporation OptiPlex GX50 /OptiPlex GX50
, BIOS A01 05/04/2001
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xfe77 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FF0000000 write-back
1 base 00FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [c00fe710]
initial memory mapped: [mem 0x00000000-0x017fffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x0fe76fff]
[mem 0x00000000-0x003fffff] page 4k
[mem 0x00400000-0x0fbfffff] page 2M
[mem 0x0fc00000-0x0fe76fff] page 4k
kernel direct mapping tables up to 0xfe76fff @ [mem 0x017fa000-0x017fffff]
RAMDISK: [mem 0x0fd9e000-0x0fe75fff]
ACPI: RSDP 000fd580 00014 (v00 DELL )
ACPI: RSDT 000fd594 00034 (v01 DELL GX50 00000005 ASL 00000061)
ACPI: FACP 000fd5c8 00074 (v01 DELL GX50 00000005 ASL 00000061)
ACPI: DSDT fffe3c22 021BD (v01 DELL dt_ex 00001000 MSFT 0100000B)
ACPI: FACS 0fe96000 00040
ACPI: SSDT fffe5f1c 000BA (v01 DELL st_ex 00001000 MSFT 0100000B)
ACPI: APIC 000fd63c 0005C (v01 DELL GX50 00000005 ASL 00000061)
ACPI: BOOT 000fd698 00028 (v01 DELL GX50 00000005 ASL 00000061)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
254MB LOWMEM available.
mapped low ram: 0 - 0fe77000
low ram: 0 - 0fe77000
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
Normal [mem 0x01000000-0x0fe76fff]
HighMem empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009ffff]
node 0: [mem 0x00100000-0x0fe76fff]
On node 0 totalpages: 65031
free_area_init_node: node 0, pgdat c1309820, node_mem_map cfb9e200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 477 pages used for memmap
Normal zone: 60570 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0x10000000-0xfebfffff] available for PCI devices
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @cfb85000 s24544 r0 d20512 u45056
pcpu-alloc: s24544 r0 d20512 u45056 alloc=11*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64522
Kernel command line: load_ramdisk=1 initrd=rootfs2.img fli4l_mode=recover
recover printk.time=0 BOOT_IMAGE=kernel2
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 252976k/260572k available (2113k kernel code, 7148k reserved, 1011k
data, 356k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff66000 - 0xfffff000 ( 612 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0677000 - 0xff7fe000 ( 753 MB)
lowmem : 0xc0000000 - 0xcfe77000 ( 254 MB)
.init : 0xc130e000 - 0xc1367000 ( 356 kB)
.data : 0xc12104be - 0xc130d1a0 (1011 kB)
.text : 0xc1000000 - 0xc12104be (2113 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=cf408000 soft=cf40a000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 798.067 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency..
1596.13 BogoMIPS (lpj=7980670)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift is 0x6
SMP alternatives: switching to UP code
ACPI: Core revision 20120711
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Celeron (Coppermine) stepping 0a
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
Brought up 1 CPUs
smpboot: Total of 1 processors activated (1596.13 BogoMIPS)
dummy:
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbeae, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs"
and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
(ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
(ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff]
(ignored)
PCI: root bus 00: using default resources
pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended
PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [8086:7120] type 00 class 0x060000
pci 0000:00:01.0: [8086:7121] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:01.0: reg 14: [mem 0xffa00000-0xffa7ffff]
pci 0000:00:1e.0: [8086:2418] type 01 class 0x060400
pci 0000:00:1f.0: [8086:2410] type 00 class 0x060100
pci 0000:00:1f.1: [8086:2411] type 00 class 0x010180
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: [8086:2412] type 00 class 0x0c0300
pci 0000:00:1f.2: reg 20: [io 0xff80-0xff9f]
pci 0000:00:1f.3: [8086:2413] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io 0xdcd0-0xdcdf]
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
pci 0000:01:08.0: [1113:1211] type 00 class 0x020000
pci 0000:01:08.0: reg 10: [io 0xec00-0xecff]
pci 0000:01:08.0: reg 14: [mem 0xff8ffc00-0xff8ffcff]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D1 D2 D3hot
pci 0000:01:0c.0: [10b7:9200] type 00 class 0x020000
pci 0000:01:0c.0: reg 10: [io 0xe880-0xe8ff]
pci 0000:01:0c.0: reg 14: [mem 0xff8ff800-0xff8ff87f]
pci 0000:01:0c.0: reg 30: [mem 0xff900000-0xff91ffff pref]
pci 0000:01:0c.0: supports D1 D2
pci 0000:01:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff9fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive
decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
e820: reserve RAM buffer [mem 0x0fe77000-0x0fffffff]
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x00100000-0x00ffffff]
pnp 00:00: [mem 0x01000000-0x0fe76fff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0xfec00000-0xfec0ffff]
pnp 00:00: [mem 0xfee00000-0xfee0ffff]
pnp 00:00: [mem 0xffb00000-0xffbfffff]
pnp 00:00: [mem 0xffc00000-0xffffffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
system 00:00: [mem 0x01000000-0x0fe76fff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c8000-0x000dffff window]
pnp 00:01: [mem 0x40000000-0xffdfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x0080-0x009f]
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x0070-0x007f]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0378-0x037f]
pnp 00:06: [io 0x0778-0x077f]
pnp 00:06: [irq 7]
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x0800-0x085f]
pnp 00:07: [io 0x0c00-0x0c7f]
pnp 00:07: [io 0x0860-0x08ff]
system 00:07: [io 0x0800-0x085f] has been reserved
system 00:07: [io 0x0c00-0x0c7f] has been reserved
system 00:07: [io 0x0860-0x08ff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff9fffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xff800000-0xff9fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 32 bytes, default 32
INITRAMFS: delaying decompression of initramfs to make use of tmpfs...
Simple Boot Flag at 0x7a set to 0x1
msgmni has been set to 494
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered (default)
intel_idle: does not run on family 6 model 8
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
EISA: Probing bus 0 at eisa.0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
console [netcon0] enabled
netconsole: network logging started
tsc: Refined TSC clocksource calibration: 798.050 MHz
Switching to clocksource tsc
floppy0: no floppy controllers found
work still pending
INITRAMFS: Trying to mount tmpfs using options 'mode=755'.
INITRAMFS: tmpfs mounted.
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 864k freed
Freeing unused kernel memory: 356k freed
Write protecting the kernel text: 2116k
Write protecting the kernel read-only data: 848k
input: PC Speaker as /devices/platform/pcspkr/input/input0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ata_generic 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_generic
scsi1 : ata_generic
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: CFA: SanDisk SDCFX3-2048, HDX 4.21, max MWDMA2
ata1.00: 4001760 sectors, multi 0: LBA
ata1.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA SanDisk SDCFX3-2 HDX PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4001760 512-byte logical blocks: (2.04 GB/1.90 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with ordered data mode
input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
3c59x: Donald Becker and others.
0000:01:0c.0: 3Com PCI 3c905C Tornado at d067e800.
>
> Gruß, Robert
--
Niemand käme auf die Idee, Tinte mit Tinte abzuwaschen
nur Blut soll immer wieder mit Blut abgewaschen werden.
-- Ebner-Eschenbach
...................... Grüsse aussem Pott! - Uli
Mehr Informationen über die Mailingliste Fli4l_dev