[Fli4l_dev] rev24502 WLAN: ath9k falsche Regdomain

[Harvey]

Carsten,

Sorry wegen der Verzögerung, aber ich bin im 'Besinnlichkeitsstress'...

 >> Wenn iw reg set nicht greift, ist der router hilflos (vermute ich).
 >
 > Wie sieht denn bei Dir der Output von "iw reg get" und "iw list" aus

iw reg get:
country DE:
         (2400 - 2483 @ 40), (N/A, 20)
         (5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR
         (5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS
         (5470 - 5725 @ 40), (N/A, 26), DFS

iw list:
Wiphy phy0
         Band 1:
                 Frequencies:
                         * 2412 MHz [1] (20.0 dBm)
                         * 2417 MHz [2] (20.0 dBm)
                         * 2422 MHz [3] (20.0 dBm)
                         * 2427 MHz [4] (20.0 dBm)
                         * 2432 MHz [5] (20.0 dBm)
                         * 2437 MHz [6] (20.0 dBm)
                         * 2442 MHz [7] (20.0 dBm)
                         * 2447 MHz [8] (20.0 dBm)
                         * 2452 MHz [9] (20.0 dBm)
                         * 2457 MHz [10] (20.0 dBm)
                         * 2462 MHz [11] (20.0 dBm)
                         * 2467 MHz [12] (20.0 dBm) (passive scanning)
                         * 2472 MHz [13] (20.0 dBm) (passive scanning)
                         * 2484 MHz [14] (20.0 dBm) (passive scanning)
                 Bitrates (non-HT):
                         * 1.0 Mbps
                         * 2.0 Mbps (short preamble supported)
                         * 5.5 Mbps (short preamble supported)
                         * 11.0 Mbps (short preamble supported)
                         * 6.0 Mbps
                         * 9.0 Mbps
                         * 12.0 Mbps
                         * 18.0 Mbps
                         * 24.0 Mbps
                         * 36.0 Mbps
                         * 48.0 Mbps
                         * 54.0 Mbps
         Band 2:
                 Frequencies:
                         * 5040 MHz [8] (disabled)
                         * 5060 MHz [12] (disabled)
                         * 5080 MHz [16] (disabled)
                         * 5180 MHz [36] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5200 MHz [40] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5220 MHz [44] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5240 MHz [48] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5260 MHz [52] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5280 MHz [56] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5300 MHz [60] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5320 MHz [64] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5500 MHz [100] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5520 MHz [104] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5540 MHz [108] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5560 MHz [112] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5580 MHz [116] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5600 MHz [120] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5620 MHz [124] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5640 MHz [128] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5660 MHz [132] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5680 MHz [136] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5700 MHz [140] (30.0 dBm) (passive scanning, 
no IBSS, radar detection)
                         * 5745 MHz [149] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5765 MHz [153] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5785 MHz [157] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5805 MHz [161] (30.0 dBm) (passive scanning, 
no IBSS)
                         * 5825 MHz [165] (30.0 dBm) (passive scanning, 
no IBSS)

Auch der Rest sieht so aus, wie er soll.

 >> Man könnte den EEPROM der Karte umschreiben, aber das ist immer ein
 >> Risiko.
 >
 > Wie mach ich das, und wo bekomm ich den korrekten EEPROM Inhalt her?

Du suchst ath_info:
http://www.irongeek.com/i.php?page=backtrack-3-man/ath_info

Wie gesagt, gefährlich!

Harvey

-- 
I am root. If you see me laughing, you'd better have a backup!