[fli4l] 3.58 -> 3.6.x upgrade problem

[Werner Joss]

hallo zusammen,
wie im titel:
upgrade klappt nicht, das image das dabei herauskommt, funktioniert nicht.
meine externe netzwerkkarte erhält offenbar keine (funktionierende) IP:
http://dl.dropbox.com/u/1760509/screenshots/flistat_not_ok.png
richtig (vom 3.58) musss das so ausssehen:
http://dl.dropbox.com/u/1760509/screenshots/flistat_ok.png
wobei laut bootlog eth1 durchaus per dhcp eine IP vom provider zugewiesen
bekommt:

Sun Oct 16 2011  09:55:22   eth1 will be configured by dhcp client, leaving
it untouched
  Sun Oct 16 2011  09:55:22   finished configuring ip on network cards ...
(/etc/rc.d/rc305.ip-eth)
  Sun Oct 16 2011  09:55:22   starting dhcp client daemon...
(/etc/rc.d/rc310.dhcpcd)
  Sun Oct 16 2011  09:55:22   eth1: dhcpcd 4.0.9 starting
  Sun Oct 16 2011  09:55:22   DHCP event 'PREINIT'
  Sun Oct 16 2011  09:55:22   ignoring dhcp event 'PREINIT'
  Sun Oct 16 2011  09:55:22   eth1: broadcasting for a lease
  Sun Oct 16 2011  09:55:27   eth1: offered 109.193.98.240 from 172.30.51.9
  Sun Oct 16 2011  09:55:27   eth1: checking 109.193.98.240 is available on
attached networks
  Sun Oct 16 2011  09:55:33   eth1: acknowledged 109.193.98.240 from
172.30.51.9
  Sun Oct 16 2011  09:55:33   eth1: leased 109.193.98.240 for 12600 seconds
  Sun Oct 16 2011  09:55:33   DHCP event 'BOUND'
  Sun Oct 16 2011  09:55:33   new_broadcast_address='109.193.99.255'
  Sun Oct 16 2011  09:55:33   new_dhcp_lease_time='12600'
  Sun Oct 16 2011  09:55:33   new_dhcp_message_type='5'
  Sun Oct 16 2011  09:55:33   new_dhcp_rebinding_time='11025'
  Sun Oct 16 2011  09:55:33   new_dhcp_renewal_time='6300'
  Sun Oct 16 2011  09:55:33   new_dhcp_server_identifier='172.30.51.9'
  Sun Oct 16 2011  09:55:33   new_ip_address='109.193.98.240'
  Sun Oct 16 2011  09:55:33   new_network_number='109.193.96.0'
  Sun Oct 16 2011  09:55:33   new_routers='109.193.96.1'
  Sun Oct 16 2011  09:55:33   new_subnet_cidr='22'
  Sun Oct 16 2011  09:55:33   new_subnet_mask='255.255.252.0'
  Sun Oct 16 2011  09:55:33   Event: up, local: '109.193.98.240',
remote='109.193.96.1'
  
an der config hab ich nur die dhcp_client.txt angepasst (da offenbar neue
syntax):

diff dhcp_client.txt 3.58/config/dhcp_client.txt
28,31d27
< DHCP_CLIENT_N='1'
< DHCP_CLIENT_1_IF='IP_NET_2_DEV'    # listen on interfaces
< DHCP_CLIENT_1_USEPEERDNS='yes'
<
> DHCP_CLIENT_INTERFACES='IP_NET_2_DEV' 
> DHCP_CLIENT_USEPEERDNS='yes'        

ich komm nicht drauf, was hier schiefläuft, vllt. kann mir ja jemand
helfen...

gruss
Werner